Open main menu
Geekworm Wiki

Comments log

This is a log of comments.

Logs
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
  • 14:00, 28 April 2024 24.128.44.197 talk posted a new comment on X1001 (The XH2.54 5V power connector connects to the GPIO on the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 22:34, 27 April 2024 180.150.80.69 talk posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (Cheers for creating this excellent, straight-forward article. I wish I had permission to register but apparently I don't, so I'm posting this anon. Thanks!)
  • 20:35, 27 April 2024 223.233.80.167 talk posted a new comment on P580 (Will this case work with the Pimoroni NVMe hat as well? I do not have the X1002 hat as it is hard to get in India. So, I got the Pimoroni bottom hat and now I'm looking for a case that'll fit.)
  • 23:43, 26 April 2024 185.195.233.147 talk posted a new comment on How to update eeprom firmware (Changed the line in /etc/fstab to rw instead of ro. It might also be possible to completely remove ro/rw and leave blank. sudo nano /etc/fstab)
  • 12:40, 26 April 2024 74.111.99.142 talk posted a new comment on X450 (Can the 3.5mm headphones jack be used as output as well?) Tags: Mobile web edit, Mobile edit
  • 09:03, 26 April 2024 70.134.61.105 talk posted a new comment on P252 (All four screws are the same length, though they should not be as the ones toward the middle of the case stand proud.)
  • 02:21, 26 April 2024 88.196.227.54 talk posted a new comment on X735-script (Any way to configure PWM in Home Assistant OS since it does not have apt, wget, etc?)
  • 09:58, 25 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello,There is no 2pin cable in the packaging list because the XH2.54 5V IN port for powering the SSD when the power supply is insufficient.Generally, the SSD power supply demand can be met by the FFC cable.hope to get your understanding.)
  • 02:55, 25 April 2024 73.22.53.193 talk posted a new comment on X1011 (I would like to create a NAS, Raid 5 out of this, are you planing to release instructions to do so?)
  • 17:14, 24 April 2024 185.65.135.178 talk posted a new comment on How to update eeprom firmware (I did the as the instruction says, but getting error. sudo apt update sudo apt upgrade sudo rpi-eeprom-update -a Not sure how to get around this problem: /usr/bin/rpi-eeprom-digest: 92: cannot create /boot/firmware/pieeprom.sig: Read-only file system I am running the latest Raspberry Pi OS 64-bit, a X1001 with a 1TB 2280 SSD and mSD is not inserted so the Pi5 starts and runs from the SSD. Have also been trying to set the eeprom for low power consumption when in stand by mode: sudo rpi-eep...)
  • 16:57, 24 April 2024 185.65.135.178 talk posted a new comment on X1001 (Integrated with XH2.54 5V power connector. It is, but what is not supplied or offered is a short cable to connect to the Pi5 board. And yes, my Pi5 is working great with the X1001 and a 1TB 2280 SDD. The dtparam=pciex1_gen=3 has been set and the microSD has been removed. So I don't really need the extra power connector, but it should have been included anyways just to be on the safe side.)
  • 04:08, 24 April 2024 77.189.215.199 talk posted a new comment on X1002 (Crucial P3 Plus 500 GB works after update to eeprom firmware 2024 - 04 - 20)
  • 11:48, 23 April 2024 Lisa talk contribs posted a new comment on P511 (Hi,the screw size: M2.5 x 9.5; Note: the screw of P511-A's Fan :M2 x 10)
  • 11:40, 23 April 2024 Lisa talk contribs posted a new comment on XScript (Hi，Yes, if you do not install the script, press 7-8 seconds to force shutdown.)
  • 10:55, 23 April 2024 Lisa talk contribs posted a new comment on X-UPS1 (Hello,you can use the output of one of the UPS boards)
  • 10:46, 23 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello，It doesn't support disable the LED light, you can cover it with something)
  • 04:54, 23 April 2024 47.181.223.243 talk posted a new comment on X650 (Resolved. Board v.1.5 is still using pcf8563 not ds1307 so no change in config.txt is necessary.)
  • 02:47, 23 April 2024 136.23.0.128 talk posted a new comment on X1011 (I would also like a case produced. Thanks) Tags: Mobile web edit, Mobile edit
  • 15:48, 22 April 2024 90.77.46.17 talk posted a new comment on XScript (If I do not install the script, I can still switch on and switch off my Pi4 with the X-C1 board. Is that save or is it like a hard shut off which might corrupt my SD card?)
  • 05:33, 22 April 2024 108.76.201.4 talk posted a new comment on X1001 (I posted as anon user #15 earlier. I think I got the problem resolved by routing the cable a little differently. I noticed I did not have the problem if the device was outside of the case (Geekworm P579-V2-K). I tried adding some electrical tape to the inside of the case (per Q4), but that didn't make a difference. However, I noticed that, when the pi was installed in the case, the FCC cable was being pressed against the inside of case, which caused it to bend some and appeared to cause...)
  • 04:04, 22 April 2024 177.99.103.158 talk posted a new comment on X1001 (Is there a way to disable the LED light, its so annoying.)
  • 01:14, 22 April 2024 108.76.201.4 talk posted a new comment on X1001 (I've installed the X1001 with a 128GB Silicon Power P24A60 (Model A60), and it has booted and ran fine for at least an hour or so, then everything just stops responding and basic commands like sudo and ls are no longer found. It behaves as though the drive has being disconnected, but the blue light is still on when this happens. I have re-seated the FCC cable on both ends a few times. It seems to be seated fully and securely. Also, the drive is typically recognized (at least momentarily)...)
  • 09:39, 21 April 2024 212.102.44.164 talk posted a new comment on X-UPS1 (When multiple boards are stacked can I use the outputs on all boards, or only the first? Thanks!)
  • 05:22, 20 April 2024 47.181.223.243 talk posted a new comment on X650 (additional error: "dmesg | grep rtc [ 8.242339] rtc-ds1307: probe of 1-0068 failed with error -5")
  • 04:05, 20 April 2024 64.77.248.35 talk posted a new comment on P511 (What is the screw size if I want to get replacements)
  • 02:25, 20 April 2024 47.181.223.243 talk posted a new comment on X650 (even after replacing with dtoverlay=i2c-rtc,ds1307 I'm getting error: No usable clock interface found. hwclock: Cannot access the Hardware Clock via any known method. and there is no /dev/rtc or /dev/rtc0)
  • 02:03, 20 April 2024 38.39.78.45 talk posted a new comment on How to Format and Mount the HDD/SSD on Raspberry Pi (thanks, was confused getting my m.2 setup!:))
  • 11:50, 19 April 2024 Lisa talk contribs posted a new comment on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to X1202#FAQ--how to disable auto power on?)
  • 11:49, 19 April 2024 Lisa talk contribs deleted comment #4657 on X1202
  • 11:49, 19 April 2024 Lisa talk contribs posted a new comment on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to FAQ--how to disable auto power on?)
  • 08:43, 19 April 2024 69.251.186.62 talk posted a new comment on X1202 (THE disable power on modification does not work. when power is applied to the dc port or usb c the pi still auto boots.)
  • 00:22, 19 April 2024 81.31.126.114 talk posted a new comment on X1011 (Thank you Lisa :))
  • 23:02, 18 April 2024 73.222.165.68 talk posted a new comment on PiKVM-A3 (Where can I get sdupport for my video output. Ive tried everything and it just isnt showing video. It isnt being detected by my host when HDMI is connected. All my other settings work great.)
  • 16:26, 18 April 2024 Lisa talk contribs posted a new comment on P580 (Hi，Sorry, we don't have a better solution. It is recommended that you use a network cable instead of wifi.)
  • 15:44, 18 April 2024 Lisa talk contribs posted a new comment on X1011 (Hi，it not support disabled, you can cover it with something.)
  • 22:07, 17 April 2024 81.31.126.114 talk posted a new comment on X1011 (Is it possible to disable the 4 blue status LED's?)
  • 20:14, 17 April 2024 72.26.41.30 talk posted a new comment on P580 (My wifi no longer works once the raspberry pi & X1002 are installed in the case. Do you have recommendations on how to resolve this?)
  • 19:08, 17 April 2024 Harry talk contribs posted a new comment on X1202 (Refer to X1202#FAQ Q: How to disable auto power on)
  • 19:08, 17 April 2024 Harry talk contribs deleted comment #4648 on X1202
  • 19:08, 17 April 2024 Harry talk contribs posted a new comment on X1202 (Refer to [X1202#FAQ] Q: How to disable auto power on)
  • 18:05, 17 April 2024 85.171.213.233 talk posted a new comment on X306 (Does any 18650 battery fit the x306 or is there any recommendation on max discharge current, voltage ?) Tags: Mobile web edit, Mobile edit
  • 17:40, 17 April 2024 Harry talk contribs posted a new comment on X735-script (First of all you really need to read our wiki tutorial carefully and then carefully step by step, try not to type in the commands, you should copy our commands from the wiki page. If you can read linux shell scripts, reading them directly is the best way to go. One thing to note is that it requires you to re-git the new script after deleting the old x735-script first. If you still can't get the board to work, please provide the results of the following commands via email for us to troubleshoo...)
  • 17:40, 17 April 2024 Harry talk contribs deleted comment #4645 on X735-script
  • 17:40, 17 April 2024 Harry talk contribs posted a new comment on X735-script (First of all you really need to read our wiki tutorial carefully and then carefully step by step, try not to type in the commands, you should copy our commands from the wiki page. If you can read linux shell scripts, reading them directly is the best way to go. One thing to note is that it requires you to re-git the new script after deleting the old x735-script first. If you still can't get the board to work, please provide the results of the following commands via email for us to troubleshoo...)
  • 17:39, 17 April 2024 Harry talk contribs deleted comment #4644 on X735-script
  • 17:39, 17 April 2024 Harry talk contribs posted a new comment on X735-script (<div class="toccolours mw-collapsible mw-collapsed"> <div style="font-weight:bold;line-height:1.0;"> Q: How can I help you solve your issues? </div> <div class="mw-collapsible-content"> A: First of all you really need to read our wiki tutorial carefully and then carefully step by step, try not to type in the commands, you should copy our commands from the wiki page. If you can read linux shell scripts, reading them directly is the best way to go. One thing to note is that it requires you to r...)
  • 16:13, 17 April 2024 149.36.48.86 talk posted a new comment on M901 (Hi, I bought an X1001 a few months ago, which has worked great with a WD SN770. I just bought an M901, thinking it should be about equivalent to the X1001, but my second SN770 isn't recognized.)
  • 14:44, 17 April 2024 103.192.227.240 talk posted a new comment on X1002 (We apologize, but if you find the wrong screws, please simply request a refund.)
  • 05:52, 17 April 2024 93.193.82.220 talk posted a new comment on X735-script (Hi, running the steps to install fan, pwr and sss the fan doesn't start. The os version is new one:OS Version: Raspberry OS 6.6.26-v8+ With the new gpiolib the script read_fan_speed.py starts successful but "0 RPM" is not what i want to see :-) Before i use the new documentation to install i try to install everything with the deprecated tutorial, may be this can be the problem ... It would be great if you could help. Lars)
  • 01:51, 17 April 2024 96.73.134.142 talk posted a new comment on X1202 (When you charge battery via USB C, pi boots if turned off. how to disable so charge battery without pi booting.)
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"