-
Main public logs
Jump to navigation
Jump to search
Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 17:38, 11 May 2024 Lisa talk contribs uploaded File:X1007-V1.1-IMG-7645-Packing-List.jpg
- 17:13, 11 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,Please remove X1202 from Pi5, wipe the pogo pin with alcohol,then reinstall it. please adjust the position of the pigo pin appropriately so that it contacts the Pi5 well.)
- 12:54, 10 May 2024 Lisa talk contribs created page File:X1003-dwg-v1.3.png
- 12:54, 10 May 2024 Lisa talk contribs uploaded File:X1003-dwg-v1.3.png
- 12:25, 10 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1003 (Hi,Please refer here to test it X1003#FAQ and troubleshoot the problem. make sure the FPC cable is firmly and fully inserted into the PI 5, FPC cable direction is correct. Please be sure to upgrade to the latest version of firmware. If the problem is still not solved, please try to replace the FFC cable and test it.)
- 11:35, 10 May 2024 Lisa talk contribs performed unknown action "comments/add" on How to Configure RAID Setting (Hi,You can observe the device operating status through the on-board HDD1 HDD2 LED indicators)
- 15:18, 9 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1201 (Hi,No need to setup a jumper and it automatically switches to being powered by the battery when power is removed. but please to make sure that your battery is not a low battery.)
- 16:06, 8 May 2024 Lisa talk contribs performed unknown action "comments/add" on XScript (Hi，Please check if the [FAN FS] is shorted by Jumper Cap.)
- 14:41, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on P580 (Hi,Sorry,we have not tested POE HAT yet, you can refer to the size of P580--height: 35.8mm, pi5+X1002 height : 11.6mm;)
- 11:15, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (pogo pins is power to Pi 5)
- 11:09, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,①momentary switch port: XH2.54-2P; ②the functions of external switche and onboard switche are the same.)
- 10:40, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on XScript (Hi,Sorry,we have not tested the Debian yet, you can refer to other users' feedback.XScript#comment-4426 or XScript#comment-4046)
- 18:38, 6 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1002 (Hi,Please check the FFC cable or reconnect the FFC cable to test.)
- 18:46, 3 May 2024 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini 2.5 (Hi,Sorry, it not support "wake ON lan")
- 18:41, 3 May 2024 Lisa talk contribs performed unknown action "comments/delete" on Q200
- 18:40, 3 May 2024 Lisa talk contribs performed unknown action "comments/delete" on XS-GaN-27W
- 18:39, 3 May 2024 Lisa talk contribs performed unknown action "comments/delete" on NASPi Gemini 2.5
- 18:39, 3 May 2024 Lisa talk contribs performed unknown action "comments/delete" on NASPi Gemini 2.5
- 18:35, 3 May 2024 Lisa talk contribs performed unknown action "comments/add" on P580 (It is recommended to replace the pimoroni spacers with M2.5*6mm (included in the P580 packing list); and you need to prepare 4pcs M2.5*4+4 or M2.5*4+5 spacers to fix the bottom.)
- 18:29, 3 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1008 (Hi，sorry，there are no plans to produce an matching case yet, you can DIY a 3D case based on the size of the board.)
- 18:23, 3 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to X1011#Ports & Connectors)
- 18:23, 3 May 2024 Lisa talk contribs performed unknown action "comments/delete" on X1011
- 18:23, 3 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to Ports & Connectors)
- 15:03, 30 April 2024 Lisa talk contribs created page File:P580-IMG-7921.jpg
- 15:03, 30 April 2024 Lisa talk contribs uploaded File:P580-IMG-7921.jpg
- 14:28, 30 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Yes, you can use a 2pin cable to power X1001(SSD) via Pi 5 GPIO)
- 09:58, 25 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello,There is no 2pin cable in the packaging list because the XH2.54 5V IN port for powering the SSD when the power supply is insufficient.Generally, the SSD power supply demand can be met by the FFC cable.hope to get your understanding.)
- 11:48, 23 April 2024 Lisa talk contribs performed unknown action "comments/add" on P511 (Hi,the screw size: M2.5 x 9.5; Note: the screw of P511-A's Fan :M2 x 10)
- 11:40, 23 April 2024 Lisa talk contribs performed unknown action "comments/add" on XScript (Hi，Yes, if you do not install the script, press 7-8 seconds to force shutdown.)
- 10:55, 23 April 2024 Lisa talk contribs performed unknown action "comments/add" on X-UPS1 (Hello,you can use the output of one of the UPS boards)
- 10:46, 23 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello，It doesn't support disable the LED light, you can cover it with something)
- 11:50, 19 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to X1202#FAQ--how to disable auto power on?)
- 11:49, 19 April 2024 Lisa talk contribs performed unknown action "comments/delete" on X1202
- 11:49, 19 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to FAQ--how to disable auto power on?)
- 16:26, 18 April 2024 Lisa talk contribs performed unknown action "comments/add" on P580 (Hi，Sorry, we don't have a better solution. It is recommended that you use a network cable instead of wifi.)
- 15:44, 18 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1011 (Hi，it not support disabled, you can cover it with something.)
- 17:34, 12 April 2024 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini 2.5 (Please refer toX1008 or X1009)
- 11:19, 12 April 2024 Lisa talk contribs performed unknown action "comments/add" on X832 (X832 V1.2 powers Pi4 through pogo pin, but does not support pi5; and X832 does not support PCIe)
- 12:32, 11 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1200 (Hi, X1200 is out of stock and is still in production.)
- 12:30, 11 April 2024 Lisa talk contribs performed unknown action "comments/add" on X832 (Hi, X832 NOT compatible with Pi 5; please refer to X1008 or X1009)
- 12:25, 9 April 2024 Lisa talk contribs created page X1300 Hardware (Created page with "==hardware installation==")
- 16:17, 8 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，When the load is heavy and the USB-C power supply is insufficient, the UPS will draw power from the battery. But if the USB-C power supply does not have overcurrent protection, it may be damaged. It is recommended to use 5V 5A power supply.)
- 15:22, 8 April 2024 Lisa talk contribs performed unknown action "comments/add" on PiKVM-A3 (Hi,You can refer to the installation video above)
- 15:04, 8 April 2024 Lisa talk contribs performed unknown action "comments/add" on X306 (X306 does not have this function setting.)
- 14:56, 8 April 2024 Lisa talk contribs performed unknown action "comments/add" on P173 (Hi,Yes, the square copper plate is used for CPU instead of the blue thermal pad, and silicone grease is applied on both sides; please refer to the installation video above - 1 minute 36 seconds)
- 15:09, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,The usual 18650 batteries can be used, but please use high quality batteries.)
- 14:56, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1003 (Hello，@Anonymous user #17 ；please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ and Try the following test it： 1/Run the lspci andlsblk command to check the NVMe SSD is recognized. 2/Add PCIE_PROBE=1 to the eeprom, (Run sudo rpi-eeprom-config --edit command, then add this line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot) 3/Update the bootloader firmware to the last verson, refer to How to update eeprom firmware, this is very important!!!And finally b...)
- 14:44, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello,Partition and format the new ssd, you can find more information on Google.)
- 14:35, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on P580 (Hi,We have sent X1001 to the Amazon warehouse, but it may take some time for the warehouse to receive it. If you want to buy the X1002+P580; you can purchase this kit here.https://www.aliexpress.com/item/3256806322304169.html)
- 12:07, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS Adapter (not support I2S signals input)
