Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 10:49, 22 December 2023 Walker talk contribs posted a new comment on DACPi (Hi, we haven't tested this one.)
  • 10:47, 22 December 2023 Walker talk contribs posted a new comment on X728-script (x728 v2.5 just in x728 v2.3 based on the addition of Adds battery charging control via GPIO16, other features are not changed, if your X728 V2.3, can work properly, hit your expected results, it is reasonable to say that the X728 V2.5 can also meet the requirements!)
  • 10:39, 22 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hi, we have received your email and have replied to you in the email)
  • 08:31, 22 December 2023 151.50.14.15 talk posted a new comment on DACPi (Filter PSU board can be added?)
  • 01:13, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I was able to program around the firmware issue by removing the short for the "CHG EN" and adding a function to my python script that started charging when capacity dropped below 97% and stopped charging when capacity was at 100% or greater. Just wondering why I was forced to do that when according to the documentation, I should have been able to do it from the hardware side.)
  • 00:02, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I'm attempting to configure an X728 v2.5 to automatically charge the battery and start the Raspberry Pi automatically when power is restored. I have shorted both the "Auto ON" and "CHG EN" and then with the unit powered off, I remove the batteries and then replace them. The result is that everything works as expected the first time power is restored, the Pi starts automatically and the battery is charging. On subsequent attempts, there is an immediate flicker on the Pi but it doesn't actua...)
  • 02:27, 21 December 2023 173.173.26.249 talk posted a new comment on PiKVM-A3 (I could use some help/advice with my PiKVM setup. I've read through the Pinned topics here and PiKVM / GeekWorm Wikis but I could be missing something so please forgive me. Hardware: - GeekWorm KVM-A3 Kit - Raspberry Pi 4B 4GB - HP Pavilion 14-v062us laptop With the laptop off, I connected my PiKVM system (HDMI and OTG USB port) to the target (my laptop) and turned the PI on. Next I turned the laptop on. I'm having two issues: 1.) H.264 / WebRTC - This option doesn't seem to work at all. I...)
  • 15:07, 20 December 2023 Walker talk contribs posted a new comment on T201 (Hello, regarding this python script, if possible, you can contact our technical support at '''support@geekworm.com ''')
  • 10:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (This is a working python script for soft shutdown sensing Pin 7 for power disconnect using Jetson GPIO. Power both the Jetson DC port and the T201 hat DC port with the same DC source and it will power on when power is connected. #!/usr/bin/env python3 import Jetson.GPIO as GPIO import time import os import subprocess # Use board pin numbering GPIO.setmode(GPIO.BOARD) # Pin to monitor for power loss POWER_LOSS_PIN = 7 # Set up the GPIO pin as input GPIO.setup(POWER_LOSS_PIN, GPIO.IN) def...)
  • 02:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (is there developer documentation for this device? I need to know how to interface with this device when developing a soft shutdown program on power source disconnect. Pin definitions? Acceptable software and commands? Any program snippets that might help are appreciated.)
  • 10:22, 19 December 2023 Walker talk contribs posted a new comment on T201 (Hi, t201 support is button control power on/off, this Jetson Nano image you mentioned comes with Ubuntu "18.04.6 LTS (Bionic Beaver)", we haven't tested it, if it's possible, you can test it and test it.)
  • 07:52, 19 December 2023 69.62.198.249 talk posted a new comment on T201 (Is there a software shutdown when the power gets disconnected? I want it to also power down the T201 so it is not using up the battery when off. I am seeing software solutions for Raspberry Pi UPS versions but not this one. Jetson Nano image comes with Ubuntu "18.04.6 LTS (Bionic Beaver)". I could maybe run a python program as a systemd service?)
  • 10:18, 18 December 2023 Walker talk contribs posted a new comment on XScript (Hello. Normally. NASPi Gemini 2.5 is Compatible with all Raspberry Pi operating systems, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 10:12, 18 December 2023 Walker talk contribs posted a new comment on X708 (Hi, when using the X708, please use a 3.7V lithium polymer battery, or a battery with sufficient discharge capacity, otherwise the X708 will automatically cut off when used at high loads.)
  • 02:10, 17 December 2023 186.205.4.236 talk posted a new comment on X708 (Hello, I would like to ask a question, please: On the x728 model, if the power supply is turned off and the battery voltage drops below 3.0, the Raspberry will shut down. However, if the power supply returns and the battery voltage is higher than 2.6, the Raspberry does not auto power on. Does this behavior also occur with the x708 model? Thanks in advance!)
  • 21:57, 15 December 2023 76.90.108.245 talk posted a new comment on XScript (Hey, using NASPi Gemini 2.5 dual ssd expansion, I recently decided to start back from scratch and test a different OS instead of omv. The fan script was working fine before and so was xoff. I reformatted everything, put Ubuntu server on it and created script according to instructions. Can doesn’t appear to work now anymore and running xoff it starts counting down to shutdown but it doesn’t shut it down. Also, power button on the unit doesn’t reboot or shutdown the unit either, only force shu...) Tags: Mobile web edit, Mobile edit
  • 17:13, 13 December 2023 Walker talk contribs posted a new comment on X728 (Hello, X715 can be used with X728, of course, you still need to install the X715 software, the two together, will not interfere with their respective functions)
  • 17:01, 13 December 2023 Walker talk contribs posted a new comment on P173 (Hi, it's about 1mm thick)
  • 00:30, 13 December 2023 50.4.28.24 talk posted a new comment on X728 (When using with the X715 do you still install the X715 software? Will the latching switch input for bootup and shutdown control still work?)
  • 22:12, 12 December 2023 95.238.133.97 talk posted a new comment on P173 (Hello, can you please tell me the thickness of the Thermal Pad for the CPU ? I broke it and I need to replace it... (unfortunately I bought the case on Amazon and they only gave 1 set of pads) Thank you!) Tags: Mobile web edit, Mobile edit
  • 12:33, 11 December 2023 Walker talk contribs posted a new comment on X630-A3 (Ok, thanks for sharing and the advice, I think this will definitely help others!)
  • 12:31, 11 December 2023 Walker talk contribs posted a new comment on X825 (Hello, the general hard disk has certain requirements on the power supply, X825 uses a 5V 4A power supply, if in the insertion of a USB3.0 hard disk, it may cause insufficient power supply situation)
  • 02:39, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I finally fixed the issue like this: I plugged a regular screen on the computer i will use with kvm, and checked the sound works properly. This computer runs debian As root I used 'hw-probe -all" to extract the edid you can then find the edid here : EDID=/root/HW_PROBE/LATEST/hw.info/logs/edid then I created the hex file using edid-decode $EDID | grep '^[0-9,a-f][0-9,a-f] ' > edid_new.hex Transfer the file on the kvm, plug the screen cable on the kvm and tested it with: kvmd-edidconf...)
  • 02:00, 10 December 2023 94.32.245.7 talk posted a new comment on XScript (I had the same error. I'm italian too and we use the comma as separator for decimals. The solution is to modify x-c1-fan.sh file. I have done as follow: 1) Type in terminal cd ~/xscript sudo nano x-c1-fan-sh 2) Modify function get_temp { RAW_TEMP="$(cat /sys/class/thermal/thermal_zone0/temp)" TEMP="$(awk -v temp="$RAW_TEMP" 'BEGIN { printf "%0.2f", temp / 1000; exit(0) }')" echo "$TEMP" } with this function get_temp { RAW_TEMP="$(cat /sys/cl...)
  • 00:14, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Hello, finally I managed to have sound with X630-A3 V1.3 and X630 v1.3 with the extra cable, changing the client Operating Sytem. I probably need to do something on Linux Client OS to emit sound, on the pikvm screen Thank you)
  • 09:07, 9 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I reinstalled from scratch, followed carefully the instructions But with X630-A3 V1.3 and X630 v1.3 and the cable between still no sound In the wiki it it said that the only change on X630 v1.5 is the DIP switch removal, but it's also something about 'Fixed HDMI back powering issue.' should I upgrade to X630-A3 V1.6 or/and X630 v1.5 ? I tried in the former install to tweak EDID, but which one would you recommend? I'm sure my MotherBoard is able to emit sound on HDMI I red that both CSI a...)
  • 16:41, 8 December 2023 203.74.156.61 talk posted a new comment on X825 (Can I plug SSD in X825, then I plug another USB3.0 HDD in pi4b? Is the power enough?)
  • 11:56, 8 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, if you would like to investigate using this code on the Raspberry Pi 5, you can send an e-mail to our technical support（ '''support@geekworm.com '''）, and we would be happy to start a conversation with you about the Raspberry Pi 5 product.)
  • 11:48, 8 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, there should be a boost module, because this product has not been sold for a long time, and some information about the product can not be provided)
  • 08:34, 8 December 2023 24.80.232.170 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hi Walker, thanks for the reply. Does the board have DC to DC boost? I don't see there is boost. If no, how come 18650 battery powered could output 5V? Thank you)
  • 21:14, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The PWM signal is not at 25 kHz as it should using PWMLED)
  • 21:12, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (Seems to work with this code: #!/usr/bin/python from gpiozero import PWMLED import time try: servo = 13 fan = PWMLED(servo) while(1): #get CPU temp file = open("/sys/class/thermal/thermal_zone0/temp") temp = float(file.read()) / 1000.00 temp = float('%.2f' % temp) file.close() if(temp > 35): fan.value = 0.4 if(temp > 40): fan.value = 0.5 if(temp > 50):...)
  • 17:26, 7 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, because this HAT is compatible with Raspberry Pi 4B/ 3B+/3B, it hasn't been tested on Raspberry Pi 5 yet, if it is used on Raspberry Pi 5, there may be some problems, products related to Raspberry Pi 5 are being designed, please pay attention to our product updates!)
  • 11:50, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The hat works well with a Raspberry Pi 5 but I can not control the fan using PWM. I currently have it running as on-off with the gpiod library. Any advice on how to use PWM on the Raspberry Pi 5? Thank you for your help)
  • 10:55, 7 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, now the kvm-a3 version are support I2S, in the X630-A3 board with I2S interface, at the same time the KVM-A3 set comes with the I2S cable inside!)
  • 10:53, 7 December 2023 Walker talk contribs posted a new comment on X630 (X630-A3 board with I2S interface and with I2S cable)
  • 10:51, 7 December 2023 Walker talk contribs posted a new comment on X630-A3 (Hi, X630-A3 versions now support i2s,X630-A3 with I2S interface on board, capable of audio functions)
  • 10:46, 7 December 2023 Walker talk contribs posted a new comment on X876 (Hi, it is x 4, but we haven't tested the Intel Optane H10 SSD.)
  • 08:23, 7 December 2023 92.157.81.159 talk posted a new comment on PiKVM-A3 (Can you give an example of a working /boot/config.txt with I2S cable for X630-A3 + X630, what are the minimal required version of X630-A3 + X630 ?)
  • 02:05, 7 December 2023 92.157.81.159 talk posted a new comment on X630 (Which combination of X630 X630-A3 version is able of I2S audio adding the extra I2S cable ?)
  • 22:55, 6 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Which version is compatible with i2s sound ? Does sound works with X630-A3 V1.3 and X630 v1.3 ?)
  • 18:46, 6 December 2023 Walker talk contribs posted a new comment on X680 (Hi, can you provide your order number? Because all the products are tested and shipped, normally there is no problem, if possible, we hope you can send a test video to us, you can contact us via our email: '''support@geekworm.com ''')
  • 10:26, 6 December 2023 98.255.192.88 talk posted a new comment on X680 (Just received my X680 and INPUT1 HDMI doesn't work at all. If I move the same HDMI cable to another INPUT 2, 3 or 4, I can see video there so I know for a fact this is a hardware defect. I sent a support message just a little bit ago. Let's see how good their support is.)
  • 02:27, 6 December 2023 199.73.48.162 talk posted a new comment on X876 (How many PCIe lanes are on the M.2 slot? x4? If it is x4, can it be configured to be bifurcated, x2x2 to support an Intel Optane H10 SSD (x2 to Optane, x2 to QLC)?)
  • 10:59, 5 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, have you encountered any unresolved issues?)
  • 10:24, 5 December 2023 Walker talk contribs posted a new comment on X650 (Thank you for your suggestion)
  • 04:40, 5 December 2023 23.83.91.176 talk posted a new comment on X728-script (Still no legit firmware? Absolute garbage of a product.)
  • 03:03, 5 December 2023 98.255.192.88 talk posted a new comment on X650 (I like the idea of having the GPIO 14, 15, and GND pins available so that you can connect serial UART cable to those pins and have serial console to the pikvm.)
  • 14:44, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (If powered by an 18650 battery, the VIN 5V pin also outputs 5V)
  • 14:36, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, can you provide your order number? Because this product has been discontinued a long time ago)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"