X1500

X1500 CM5 IO Board - Interface

X1500 CM5 IO Board - Support Dual NVMe SSDs

X1500 CM5 IO Board

X1500 CM5 IO Board - Assembly

Support Hailo-8 AI Accelerator

Overview

The X1500 is a purpose-built IO board tailored for the Raspberry Pi Compute Module 5 (CM5). It features two full-size M.2 NVMe slots and integrates a variety of peripherals into an ultra-compact design. This carrier board is meticulously engineered to streamline system development, allowing you to rapidly assemble solutions using readily available off-the-shelf components, such as existing Raspberry Pi HATs and M.2 NVMe devices.

For ease of integration, the board features a streamlined layout with major user connectors positioned along one edge, making enclosure design straightforward and efficient. Whether you're developing with the Compute Module 5 or deploying it as part of an embedded end product, the X1500 is designed to meet your needs with flexibility and performance.

Model	Compatible with	Description	Matching Case	Support Hailo-8 AI Accelerator
X1501 V1.0	Raspberry Pi CM5	CM5 IO board 1GbE + 2.5GbE M.2 NVMe	X1500-C1	Yes
X1500 V1.0	Raspberry Pi CM5	CM5 IO board 1GbE USB3.0 M.2 NVMe	X1500-C1	Yes

Features

For use with	Raspberry Pi Compute Module 5 (CM5)
Key Features	Compact Design (87x88x25mm): Combines a small footprint with a rich array of I/O peripherals for versatile applications. Gigabit Ethernet Port: Features 1GbE with PoE+ support (for simplified power delivery) Dual M.2 2280 NVMe SSD Slots: Supports up to 8TB (4TB+4TB) via PCIe 2.0 (5Gbps) for fast data transfers and boot times, compatible with M.2 NVMe SSDs in 2280, 2242, and 2230 form factors. Dual HDMI 2.0 Ports: Enables dual 4K display output for multimedia or industrial use cases. Dual USB 3.2 Gen 1 Ports: delivering high-speed data transfer rates of up to 5 Gbps. Dual MIPI DSI/CSI-2 Connectors: 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration. CAM/DISP 0 supports both displays or cameras. CAM/DISP 0 supports using a signal to power down the camera to save power. CAM/DISP 1 typically needs two jumpers fitting to J6 to route the I2C signals form the GPIO connector to the camera connector. CAM/DISP 1 can be be used with displays and cameras. If it is used with a camera, it isn’t possible to power down the camera. Also refer to Raspberry Pi Compute Module 5 IO Board datasheet (Page 5) MicroSD Card Slot: Supports Compute Module 5 Lite variants (without onboard eMMC) Raspberry Pi HAT+ Compatibility: Reuse existing Raspberry Pi HATs to save time and reduce development costs. Convenient Power Button: Easily wake or shut down the Compute Module 5 with a single press. RTC Battery Socket (CR1220 coin battery is not included): Ensures accurate timekeeping during power interruptions. PWM Fan Support: Includes a fan power connector for adjustable cooling in demanding environments. USB-C Port: Handles both power delivery and OS image loading directly into the CM5’s eMMC. Configurable Jumpers: Allows disabling features like wireless connectivity or EEPROM writing for customization. Streamlined Connector Layout: USB, HDMI, Ethernet, and power ports are grouped along one edge for clean cable management and easy enclosure integration.
Technical Specification	Power supply: 5.1Vdc +/-5% 5A power via USB-C power supply Connectivity: USB-C (Power in and OS image loading) 1Gigabit RJ45 Ethernet with PoE+ HAT+ support (requires separate Raspberry Pi PoE+ HAT+) 2 x USB3.0 Type-A 2 x USB2.0 Type-A Standard 40-pin GPIO header microSD card socket for Compute Module 5 Lite modules 2 x M.2 M key NVMe sockets 4-pin fan connector 2 x MIPI DSI/CSI-2 FPC connectors (22-pin 0.5 mm pitch cable) Raspberry Pi HAT+ connector RTC battery socket Video: 2 x full-size HDMI 2.0 connectors Input power: External +5V USB-C PSU Power button to wake and shut down Compute Module 5 Form factor: 85mm x 87mm
Important Notes	For optimal performance, please use the official Raspberry Pi 27W USB-C Power Supply or an alternative power supply capable of delivering 5.1V at 5A. An incompatible power supply with a lower output voltage may fail to power on the system.

Packing List

CM5 carrier board Kit

X1500 V1.0 CM5 carrier board x 1
M.2-A1 extension board x 2 (to fix M.2 2230 and 2242 SSDs)
2.54mm jumer cap x 2
M2*3 screw x 6

User Manual

Hardware Installation: X1500 Hardware, please click the left link to view it, and it's very important!
How to make it work: X1500 Software, please click the left link to view it, and it's very important!
Installation Guide

Matching Case

X1500-C1 case is designed for the raspberry pi CM5 & X1500/X1501 IO Board only, compatible with C519 heatsink.

Case dimensions: 110 x 90 x 33 mm / 4.33 x 3.54 x 1.30 inches

X1500-C1 packing list
X500-C1
X1501 Size

FAQ

Q. Why can't X1500/X15011 boot up?

A:Due to PD power compatibility issues, some PD power supplies may cause X1500/X1501 to fail to boot up. Please replace the official Raspberry Pi 5 power supply or Geekworm PSU20 power supply.

Q: Does the X1500/X1501 support Hailo-8 M.2 AI Accelerator?

A: According to the test, the X1500/X1501 can support one Hailo-8 M.2 AI Accelerator Module and one M.2 Key-M NVMe SSD.

Q: Is X1500/X1501 compatible with POE+ Hat?

A: We tested the [Official Raspberry Pi4 POE+ Hat] and it can be compatible, but the cooling fan did not work, probably due to the OS configuration. If you are interested, you can also test it and look forward to your sharing of your suggestions.

Enable comment auto-refresher