Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

11:19, 25 December 2023 Walker talk contribs performed unknown action "comments/add" on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at ： '''support@geekworm.com ''')
11:18, 25 December 2023 Walker talk contribs performed unknown action "comments/delete" on X728-script
11:18, 25 December 2023 Walker talk contribs performed unknown action "comments/add" on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at :'''support@geekworm.com '''')
11:14, 25 December 2023 Walker talk contribs performed unknown action "comments/add" on P394 (Hi, we have now changed the design and added a key button)
11:13, 25 December 2023 Walker talk contribs performed unknown action "comments/add" on P394 (Hi, the design principle of this acrylic case is like this, using 9 layers of acrylic stacked on top of each other, if you don't like this kind of design, you can consider our Pi 5 metal case: [https://www.aliexpress.us/item/3256806091879071.html?gatewayAdapt=glo2usa4itemAdapt''' ''' P573])
10:38, 24 December 2023 Harry talk contribs created page File:PI5-sd-copier.png
10:38, 24 December 2023 Harry talk contribs uploaded File:PI5-sd-copier.png
20:15, 23 December 2023 94.110.204.43 talk performed unknown action "comments/add" on P394 (It all feels compressed when mounted. The power buttonhole was not present. Had the original cooler installed before mounting, which went fine. The design has to be revised as it is not a decent fit for the Pi5.)
00:40, 23 December 2023 154.6.90.21 talk performed unknown action "comments/add" on X728-script (So what is the expected result on a v2.5 when shorting both "Auto ON" and "CHG EN"? I'm trying to understand the appropriate hardware configuration on a v2.5 to get it to auto start and auto charge without programming. I would agree that it would be reasonable to expect the v2.5 to be able to meet the requirement. Your answer seems to be dodging the actual question.)
22:46, 22 December 2023 94.31.90.222 talk performed unknown action "comments/add" on P394 (This thing makes no sense at all. I need a case to protect the device and I don't want to disassemble essential parts (active cooler) every time I change something. Also, the Pi does not have a reasonable hold in the case - it is only held in place by pressure. Totally useless and pointless.)
12:00, 22 December 2023 Cindy talk contribs created page File:X1001-IMG-6856.jpg
12:00, 22 December 2023 Cindy talk contribs uploaded File:X1001-IMG-6856.jpg
10:49, 22 December 2023 Walker talk contribs performed unknown action "comments/add" on DACPi (Hi, we haven't tested this one.)
10:47, 22 December 2023 Walker talk contribs performed unknown action "comments/add" on X728-script (x728 v2.5 just in x728 v2.3 based on the addition of Adds battery charging control via GPIO16, other features are not changed, if your X728 V2.3, can work properly, hit your expected results, it is reasonable to say that the X728 V2.5 can also meet the requirements!)
10:39, 22 December 2023 Walker talk contribs performed unknown action "comments/add" on PiKVM-A3 (Hi, we have received your email and have replied to you in the email)
08:31, 22 December 2023 151.50.14.15 talk performed unknown action "comments/add" on DACPi (Filter PSU board can be added?)
01:13, 22 December 2023 154.6.90.21 talk performed unknown action "comments/add" on X728-script (I was able to program around the firmware issue by removing the short for the "CHG EN" and adding a function to my python script that started charging when capacity dropped below 97% and stopped charging when capacity was at 100% or greater. Just wondering why I was forced to do that when according to the documentation, I should have been able to do it from the hardware side.)
00:02, 22 December 2023 154.6.90.21 talk performed unknown action "comments/add" on X728-script (I'm attempting to configure an X728 v2.5 to automatically charge the battery and start the Raspberry Pi automatically when power is restored. I have shorted both the "Auto ON" and "CHG EN" and then with the unit powered off, I remove the batteries and then replace them. The result is that everything works as expected the first time power is restored, the Pi starts automatically and the battery is charging. On subsequent attempts, there is an immediate flicker on the Pi but it doesn't actua...)
18:14, 21 December 2023 Harry talk contribs uploaded a new version of File:N508-IMG-5843-acce-1.jpg
18:13, 21 December 2023 Harry talk contribs created page File:IMG-6118-size-1.jpg
18:13, 21 December 2023 Harry talk contribs uploaded File:IMG-6118-size-1.jpg
02:27, 21 December 2023 173.173.26.249 talk performed unknown action "comments/add" on PiKVM-A3 (I could use some help/advice with my PiKVM setup. I've read through the Pinned topics here and PiKVM / GeekWorm Wikis but I could be missing something so please forgive me. Hardware: - GeekWorm KVM-A3 Kit - Raspberry Pi 4B 4GB - HP Pavilion 14-v062us laptop With the laptop off, I connected my PiKVM system (HDMI and OTG USB port) to the target (my laptop) and turned the PI on. Next I turned the laptop on. I'm having two issues: 1.) H.264 / WebRTC - This option doesn't seem to work at all. I...)
15:07, 20 December 2023 Walker talk contribs performed unknown action "comments/add" on T201 (Hello, regarding this python script, if possible, you can contact our technical support at '''support@geekworm.com ''')
10:39, 20 December 2023 69.62.198.249 talk performed unknown action "comments/add" on T201 (This is a working python script for soft shutdown sensing Pin 7 for power disconnect using Jetson GPIO. Power both the Jetson DC port and the T201 hat DC port with the same DC source and it will power on when power is connected. #!/usr/bin/env python3 import Jetson.GPIO as GPIO import time import os import subprocess # Use board pin numbering GPIO.setmode(GPIO.BOARD) # Pin to monitor for power loss POWER_LOSS_PIN = 7 # Set up the GPIO pin as input GPIO.setup(POWER_LOSS_PIN, GPIO.IN) def...)
02:39, 20 December 2023 69.62.198.249 talk performed unknown action "comments/add" on T201 (is there developer documentation for this device? I need to know how to interface with this device when developing a soft shutdown program on power source disconnect. Pin definitions? Acceptable software and commands? Any program snippets that might help are appreciated.)
10:22, 19 December 2023 Walker talk contribs performed unknown action "comments/add" on T201 (Hi, t201 support is button control power on/off, this Jetson Nano image you mentioned comes with Ubuntu "18.04.6 LTS (Bionic Beaver)", we haven't tested it, if it's possible, you can test it and test it.)
07:52, 19 December 2023 69.62.198.249 talk performed unknown action "comments/add" on T201 (Is there a software shutdown when the power gets disconnected? I want it to also power down the T201 so it is not using up the battery when off. I am seeing software solutions for Raspberry Pi UPS versions but not this one. Jetson Nano image comes with Ubuntu "18.04.6 LTS (Bionic Beaver)". I could maybe run a python program as a systemd service?)
10:18, 18 December 2023 Walker talk contribs performed unknown action "comments/add" on XScript (Hello. Normally. NASPi Gemini 2.5 is Compatible with all Raspberry Pi operating systems, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
10:12, 18 December 2023 Walker talk contribs performed unknown action "comments/add" on X708 (Hi, when using the X708, please use a 3.7V lithium polymer battery, or a battery with sufficient discharge capacity, otherwise the X708 will automatically cut off when used at high loads.)
02:10, 17 December 2023 186.205.4.236 talk performed unknown action "comments/add" on X708 (Hello, I would like to ask a question, please: On the x728 model, if the power supply is turned off and the battery voltage drops below 3.0, the Raspberry will shut down. However, if the power supply returns and the battery voltage is higher than 2.6, the Raspberry does not auto power on. Does this behavior also occur with the x708 model? Thanks in advance!)
21:57, 15 December 2023 76.90.108.245 talk performed unknown action "comments/add" on XScript (Hey, using NASPi Gemini 2.5 dual ssd expansion, I recently decided to start back from scratch and test a different OS instead of omv. The fan script was working fine before and so was xoff. I reformatted everything, put Ubuntu server on it and created script according to instructions. Can doesn’t appear to work now anymore and running xoff it starts counting down to shutdown but it doesn’t shut it down. Also, power button on the unit doesn’t reboot or shutdown the unit either, only force shu...) Tags: Mobile edit Mobile web edit
17:13, 13 December 2023 Walker talk contribs performed unknown action "comments/add" on X728 (Hello, X715 can be used with X728, of course, you still need to install the X715 software, the two together, will not interfere with their respective functions)
17:01, 13 December 2023 Walker talk contribs performed unknown action "comments/add" on P173 (Hi, it's about 1mm thick)
16:47, 13 December 2023 Abby talk contribs created page P532 (Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual==  <comments />  <!--Remove other cate...")
00:30, 13 December 2023 50.4.28.24 talk performed unknown action "comments/add" on X728 (When using with the X715 do you still install the X715 software? Will the latching switch input for bootup and shutdown control still work?)
22:12, 12 December 2023 95.238.133.97 talk performed unknown action "comments/add" on P173 (Hello, can you please tell me the thickness of the Thermal Pad for the CPU ? I broke it and I need to replace it... (unfortunately I bought the case on Amazon and they only gave 1 set of pads) Thank you!) Tags: Mobile edit Mobile web edit
18:53, 12 December 2023 Harry talk contribs created page X1000 Hardware (Created page with "{{GD Template Impl}} '''Interface Description:''' 800px '''Installation wizard:''' 800px <!--Add r...")
18:53, 12 December 2023 Harry talk contribs created page File:X1000-IMG-6914-1.jpg
18:53, 12 December 2023 Harry talk contribs uploaded File:X1000-IMG-6914-1.jpg
18:36, 12 December 2023 Harry talk contribs created page File:X1000-IMG-6927-installation.jpg
18:36, 12 December 2023 Harry talk contribs uploaded File:X1000-IMG-6927-installation.jpg
18:34, 12 December 2023 Harry talk contribs created page X1001 Hardware (Created page with "{{GD Template Impl}} '''Interface Description:''' X1001-V1.1.jpg '''Installation wizard:''' 800px  <c...")
18:33, 12 December 2023 Harry talk contribs created page File:X1001-V1.1.jpg
18:33, 12 December 2023 Harry talk contribs uploaded File:X1001-V1.1.jpg
18:32, 12 December 2023 Harry talk contribs created page File:X1001-IMG-6856-installation.jpg
18:32, 12 December 2023 Harry talk contribs uploaded File:X1001-IMG-6856-installation.jpg
13:13, 11 December 2023 Harry talk contribs uploaded a new version of File:X1001-V1.1-IMG-6870-Packing-List.jpg
13:12, 11 December 2023 Harry talk contribs uploaded a new version of File:X1000-IMG-6909-packing-list-2.jpg
13:08, 11 December 2023 Harry talk contribs created page File:X1000-IMG-6909-packing-list-2.jpg
13:08, 11 December 2023 Harry talk contribs uploaded File:X1000-IMG-6909-packing-list-2.jpg