X835

Stackable X835 3.5" SATA HDD Board

StackableX835 Metal Case for Pi4&X835/X832&X735

Stackable X835 3.5" SATA HDD Board

Stackable X835 3.5" SATA HDD Board

How to stack & power X835

Stackable X835 3.5" SATA HDD Board

Overview

The X835 board has been discontinued for years!!!

• It's time to use idle hard drives. you can DIY a small NAS, music player or something interesting with X835 expansion board for Raspberry Pi 4.
• The X835 expansion board provides a complete storage solution for Raspberry Pi 4 Model B; The X835 3.5" SATA adapter can support up to 10TB 3.5 inch SATA hard disk drives (HDD).
• The X835 stackable 3.5 inch SATA HDD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 4B. Its elegant and ultra-compact design allows 3.5" HDD to be conveniently attached to Raspberry Pi. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again.
• The X835 can be the perfect storage solution for your home media center and building Network-attached storage (NAS) for storing and streaming your own videos, music, and digital photos around the house and even across the world. the X835 also supports operating system booting from your HDD for faster app opens, web serving and file copying.

Tips about 3pcs DC 5V OUT Port:

When use external latching switch on X835 board, please do not connect 2pin power cable to DC 5V OUT nearby USB2 and USB3.

What do you need to use Raspberry Pi 4 X835 3.5 inch SATA HDD Storage Board?

• 1. A Raspberry Pi 4 Board
• 2. A DC 12V ≥3A Power Supply
• 3. A 3.5 inch SATA hard disk drive(HDD)
• 4. A X835 Metal Case (optional, will release in the future)

Features

• Operating System: All Raspberry Pi operating systems
• Supports up to 14TB 3.5 inch SATA hard disk drives (HDD) (Recommend to use new HDD, as the old one maybe not recognized)
• Ideal storage solution for Raspberry Pi 4
• USB 3.0 connectivity offers plug-and-play functionality on your Raspberry Pi 4
• Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac
• External Self Powered - Do not require power from Raspberry Pi USB port
• PCB Size 163mm x101mm

Installation Guide

Installation Video

• youtu.be/8jdNf4sYQkQ

Installation User Manual

Tips:

Packing List

• 1 x X835 HDD expansion board
• 1 x USB 3.0 A Male to A-Male Data cable
• 1 x 2-Pin Power Connection cable
• 1 x Power daughter board
• 4 x Spacer F/F M2.5 x 12mm
• 4 x Spacer F/F M3 x 32mm
• 8 x Screw M2.5 x5mm
• 8 x Screw M3 x 8mm

Power Supply

• Power supply: 12Vdc +/-5% , ≥3A
• Ports & Connectors: DC jack - 5.5x2.5mm

PS: As we know that the power supply is very important to the hard disk, so please do not use the low quality power adapter. Please use a high quality power adapter, or you may encounter problems such as not recognizing the hard disk.

Some Tips

• Properly Mount USB Storage on Raspberry Pi
• Auto Mount an NTFS USB Drive on Raspberry Pi
• File:Usb3-frequency-interference-papers.pdf

How to connect X835 and X735?

NOTE: X735 use DC 5V/4A power adapter, X835 use DC 12V/3A power adapter, so DON'T directly connect the 12V/3A PSU to the X735，otherwise the X735 will burn out.

How to stack X835

Note: If you need to use just one piece 3.5" SATA HDD for Raspberry Pi 4, please refer to X832, the X832 use USB bridge to connect Pi 4 with X832.

Please refer to the following guide about how to stack X835:

Matching Metal Case for X835

Please refer to X835-C1.

Document

About USB boot please refer to Does the X825/X855 support USB boot

FAQ

1. Why when multiple X835 boards are stacked together, except for the first X835 at the top, all other X835s are not powered on?

Answer: When multiple X835 boards are stacked, except for the first X835 board on the top, the two jumpers of the other X835 boards need to be plugged in, otherwise they will not be powered on.

2. How to use external power switch for X835 board?

Answer: 1. Please use latching switch only and not use momentary switch; The jumper socket fitted for "PWR ON" must be removed when using an external latching power switch. 2.All the board, cable, jumper connections must be under power-off station.

3. What power supply requires for X835?

Answer: The X835 reuqires 12Vdc +/-5% , ≥3A power supply with DC jack - 5.5x2.5mm.

4. Where to connect the power supply?

Answer: Whatever to use with X735 or not, the PSU must be connected to X835 DC 12V IN port, not X735 or Raspberry Pi.

5.How to connect the X735 with X835?

Answer: Connect the 2pin power cable from X835 "5V OUT" to X735 "5V IN". Connect another 2 pinc power cable from X835 "PWR Ctrl" to X735 "5V OUT".

6. How to set the Jumper cap on X735?

Answer: The "L-SW" pin must be shorted when use X735 latching switch port to connect an external latching switch.

7. How to connect the power switch in the X835 metal case?

Answer: Connect the power switch to X735 "Latching Switch" port when use with X735.

8. How many X835 borads can I stack?

In theory, it can stack as many X835 as possible, but considering the speed of USB3 and power supply issues, it recommend that just stack about 3-5pcs X835.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #17

33 months ago

Score 0

Hi,

my x835 ist working great with pi4 and x735. Now I want to stack some more 3.5 HDDs but the board is sold out everywhere (amazon+ali). Is it still in production or is there a new version i could use instead? Would be great to hear from you!

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

33 months ago

Score 0

Hello，

The X835 is no longer in production.

please refer X832 board, Matching Case x832-C1.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #16

45 months ago

Score 0

Hi, I guess no one will reply me about that but let me take a try : I'd like to use it on my Raspberry Pi 4 but it already got a HAT that doesn't allow to connect something else on GPIOs pins (the concerned HAT is Hifiberry DAC+ DSP, sadly we can't put links here). So here is my question, could we make the x835 board power the Raspberry through USB-C than through GPIOs (like with an adapter or something) ?

Thanks very much to the one who'll answer this, if only you exist...

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

41 months ago

Score 0

Hi，x835 or X832 can't realize your idea. You can consider the X880, which provides power to the pi through the test pin instead of the power cord, so it does not occupy GPIO

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #15

46 months ago

Score 0

What OS should I use to make x835 work? Right now I'm using ubuntu serve 20.10 and cannot see any storage devices connected to my rpi 4. I was using lsblk and sudo fdisk -l to check

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #14

49 months ago

Score 0

Hi there, I've got an X835, Raspberry Pi 4B with a WD 2.5" 2TB SATA. Raspberry Pi is up and running with Raspbian (w/ OpenMediaVault running) and fully updated/upgraded. However, my Raspberry Pi is not detecting the SATA drive. It is NTFS formatted but I've confirmed that ntfs-3g (i.e FUSE) is present and up to date. When I disconnect it from my Pi and connect to my Win 10 machine (still inside the X835) it immediately mounts on the Win 10 machine, so I know power and the drive aren't issues. Any suggestions on how to make it appear correctly?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #14

49 months ago

Score 0

Sorry it is a 3.5" drive, 2.5" below is a typo.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

49 months ago

Score 0

Hello sir, We suggest you can email us at support@geekworm.com with your order number, hardare connection details, the power supply you use, then we can more easy to help, thanks! Best regards,

Cindy/Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #13

49 months ago

Score 0

got two x835 which work without problems until to day when I was converting them to use USB Boot option on the PI4,Followed the instruction which are on the is wiki. There is a problem when the HDD are 4TB in size the "SD Card copier" fails when it trys to partition 256 and the rest of the drive, the second partion fails to write. (I have the though that there is a 2tb limit)

Will try this on the Rasberry Pi org as a problem.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #12

49 months ago

Score 0

Hello!

I am using Raspberry Pi 4B (booting from sd card) with a single X835 board and WD blue 3.5" HDD. I have two questions:

1) Is there a way how to configure the system to spin down the HDD (stop its rotation) when inactive for certain time? Currently, the HDD is only used rarely, but it keeps spinning forever.

2) What is the proper way to shut down the system? When I shut down the Pi ($ sudo shutdown -h now), the red PWR LED on the Pi is lit (on) - this is probably normal. The problem is that the X835 board stays on and the HDD keeps spinning. Is it safe to disconnect the 12V power input of X835 at this point? Can't it damage the HDD or my data?

Thanks in advance!

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

49 months ago

Score 0

hello,i would like to attach 5 hard drive with 8Tb to my raspberry pi 4 using board X835. My question is: 1- can i use just one power supply? 2- if not, how much i need, and how i connect? 3- if yes, is just connect to the first X835 board? (under the raspberry pi) 4- how much TB can support board X835?

Thanks

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #10

50 months ago

Score 0

What is the maximum amount of hdd I can connect to rpi 4 using X835 borads, do I also need to upgrade power supply if use a lot of disks like for example 5+, if yes what is the most convenient way to do so.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #9

51 months ago

Score 0

what can do with usb 2 and 3

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Natalka1122

53 months ago

Score 0

Is it compatible with X728? https://rasp...iki.com/X728 When stacked, does it support software RAID?

I want to make all my data safe in case of powerloss.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

53 months ago

Score 0

Hi friend, Sorry the X835 is not compatible with X728.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Isaiahgoveait

53 months ago

Score 0

I found this picture here on aliexpress selling this. https://imgur.com/a/wuRMaZg

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #8

53 months ago

Score 0

Hi, I have ordered two X835 boards in order to stack them. But I don't think there's enough room for the 3,5 disk if I stack. Also, I don't have the needed screws to "link" them together. Where do I get them?

Thanks.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

53 months ago

Score 0

Hi friend,

The standoffs for X835 to stack just added recently, if you do not have, please contact us to get some.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

55 months ago

Score 0

Hi, x835 has 4 usb 3.0, is there anyone connect other disks with them? works well?

Thank you.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

53 months ago

Score 0

Hi friend, Do you try this?

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

56 months ago

Score 0

I'm using a Rasperry Pi 4 B with a X835 , a 6TB HDD and a X735 with a 12V 5A power supply. The Pi work and the X835 work also (tested is on my laptop) but when i plug the x835 with the Pi, the Pi seems to freeze. Any ideas what could be the issue ?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

56 months ago

Score 0

I found the issue ! It seems sometimes USB3 messed up with the wifi in 2.4 GHz just setup the wifi to your 5GHz network and it will work just fine !

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

56 months ago

Score 0

Hi friend,

Yes, you are right.you can refer to here about more info:File:Usb3-frequency-interference-papers.pdf

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

56 months ago

Score 0

Using an x835 box and pressing the power button does not shut down the x835 board & fan. Should it? The Pi switches off but the fan is still spinning and the blue power light is on. No jumper was removed.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Harry

56 months ago

Score 0

Hi, Please refer to:

Regards,

Harry / Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

56 months ago

Score 0

@Harry - ok so that doesn't seem practical, would an x735 board provide enough general cooling and then remove the case fan? thanks

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

56 months ago

Score 0

I have 2 questions: 1)Does X835 support Raspiberry 3B+ ? 2)Is X835 stackable such as X828?

I have a Pi 3B+ and two 3.5" Disks, and want to build a NAS.

Thanks

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Harry

56 months ago

Score 0

1. x835 supports PI 3B+; 2. X835 is stackble, but the USB 3 cable is shorten, you need use the long USB 3 cable.

Harry / Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

57 months ago

Score 0

I formated the HDD on my desktop pc without problems, but connected back to X835 I got io-faults. Connected back to desktop, no problems.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

57 months ago

Score 0

Hi,could you please attach your order number to send us some photos?

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

57 months ago

Score 0

I think this system configuration X735 + X835 doesnt works well together. I have exactly the same setup, when i powered on the whole system, it seems my HDD died suddenly...and i got a smell of burning then. HHD died...

i changed the HDD, and i have the latching switch that dont work now, system boot up but latching switch just doesnt works. I think something when wrong for the X835 (or X735) when my first HDD burn.

i got much mail with geekworm for that, and im waiting for an answer, they assume they did test their boards before selling.

I dont think they are going to exchange the boards....

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

57 months ago

Score 0

Hi, sir.

This is really bad news.

Please refer to http://www.r..._and_X735.3F

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

57 months ago

Score 0

Hi, I purchased the X835 case, X835 SATA board and the X735 together with a 4TB WD RED HDD. Partitioning of the HDD was ok but I was not able to format the HDD. After a couple of hours formating, the Pi get stocked. At the moment I'm using an external USB-to-SATA adpter wich works fine.

Do you have any suggestion?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

57 months ago

Score 0

Hi, Please try to format your HDD on your desktop computer?

Permalink