X832
Contents
X832 V1.2 is released
X832 V1.2 is released on 26th October 2021;
Update:
- New add 4pcs test pins on the board to power Pi 4 with X832 via test pins. Not need the 2pin cable with use X832 V1.2 with Raspberry Pi 4 Only.
- DC jack is changed from DC5525 to DC5521. (DC5525 is compatible with DC5521.)
- Jumper function updated, please refer to photo [X832 V1.2 Interface].
Overview
The X832 is a 3.5" SATA HDD expansion board focused on providing a bigger storage solution for your Raspberry Pi 4. The board is a great way to give a desktop look, as you can connect multiple external hard drivers without having them "hanging" from the USB ports of your SBC.
If you are looking for building a Media Center or even a Network-attached storage (NAS), the X832 is the right board for it. You will be able to separate one hard disk only for operating system and the rest for media, games...etc.
If you need dual 3.5" sata board, please refer to X835(A longer USB 3.0 A Male to A-Male Data cable is needed).
Features
FOR USE WITH |
Raspberry Pi 4 Model B |
Operating System |
All Raspberry Pi operating systems |
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
|
Packing List
- X832 HDD expansion board x 1
- USB3.1 jumper x 1
- 2-Pin Power Connection Wire x 1
- Power daughter board x 1
- Spacer F/F M2.5 x 12mm x 4
- Spacer F/F M3 x 32mm x 4
- Spacer M/F M2.5 x 11mm x 1
- Screw M2.5 x5mm x 9
- Screw M3 x 8mm x 8
Matching Metal Case
X835 Case can support Raspberry Pi 4B & X835/X832 3.5" SATA Board, please refer to X835-C1
Installation video for Raspberry Pi 4 + X835/X832 + X735 + X835-C1: https://youtu.be/8jdNf4sYQkQ
User Manual
About USB boot please refer to Does the X825/X855 support USB boot
Enable comment auto-refresher
Anonymous user #6
Permalink |
Lisa
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Walker
Anonymous user #3
Permalink |
Lisa
Anonymous user #4
Lisa
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa