3,450
edits
Changes
X650
,[[File:X650-IMG-5483.jpg|thumb|right|X650 kvm shield]]
[[File:X650-IMG-5611-Interface-Schematic.jpg|thumb|right|X650 kvm hardware diagram]]
[[File:IMG-7148-Dimension.jpg|thumb|right|X650 Dimension]]
[[File:X650-IMG-5476.jpg|thumb|right|10-Pin Header function]]
[[File:X650-IMG-5474.jpg|thumb|right|10-Pin Header function]]
Want to know more information for pikvm, please refer to https://pikvm.org/
<span style="color:red;">X650 V1.5 and X650 V1.3 has been discontinued, you can refer to [[X651]] or [[X652]]. </span>
Key differences between X650 V1.5 & X650 V1.3 include:
'''Input Resolution'''
* X650 V1.3: Supports up to 1920×1080@<span style="color:red;">'''50Hz'''</span>
* X650 V1.5: Supported up to 1920×1080@<span style="color:red;">'''60Hz'''</span>
'''RTC Function'''
* X650 V1.3: Requires manual [[X650#Enable_RTC|RTC configuration]]
* X650 V1.5: No RTC configuration needed
===OS download and install===
1. Firstly, need prepair a micro sd card, a minimum 16 32/64 Gb class 10 memory card is recommended. If you use a CM4 with eMMC, you don't need a micro sd card.
2. Download an appropriate OS image for the PiKVM, the url link is https://pikvm.org/download/ or click [https://files.pikvm.org/images/v3-hdmi-rpi4-box-latest.img.xz this one] to download it. (Please use the '''V3 HAT Pre-Assembled''' OSimage)
:''' 1) How to installing the Operating System''' (CM4 without eMMC)[[File:Pi4-V3-HAT.png|800px|PiKVM V3 platform]]
#CM4 without eMMC (simpler, but you need a 32GB or 64GB micro sd)
#CM4 with eMMC (requires additional steps)
'''Option 1: CM4 without eMMC'''
:'''1. Prepair flashing tools:'''
:*You can use '''Raspberry Pi Imager''' or one of the following tools:
:*[https://etcher.balena.io/ balenaEtcher]: Compatible with Windows, macOS, and Ubuntu.
:* [https://i-win32diskimager.com/ Win32 Disk Imager]: Designed for Windows.
:'''2. Flash the OS Image to a MicroSD Card'''
:*Follow [https://docs.pikvm.org/flashing_os the straightforward instructions] or [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system the Official installation tutorial]
:'''3. Power the Device'''
:*Power on your device, then open a browser and log in to the PiKVM web UI.
'''Option 2: CM4 with eMMC (requires additional steps)'''
:'''1. Prepare for flashing'''
:*Short the nBOOT Pin as shown in the image below.
::[[File:X650-IMG-5474-1.jpg|500px]]
::b'''2. Connect TypeUse the '''USB-C to TYPC-A OTG cable''' included in the X650 box to connect to your computer ::c'''3. Power the X650 Device''':*Use a 5V power adapter to power the device via the PWR Type-C with your 5V Power adaperport.: '''4. Flash the OS Image''':*You need: i) install rpiboot utility, ii) install RaspberryPI imager iii) format the eMMC once connected to the host, iv) select OS, eMMC appearing on the host and flash it via imager:d. Then rerfer *You can refer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot this Jeff's tutorial] to or [https://www.raspberrypi.com/documentation/computers/compute-module.html#flash pikvm -compute-module-emmc Raspberry Pi Official Tutorial] for detailed instructions on flashing the OS.: '''5. Complete the Process'''::e. *Remove the nBOOT jumper of nBOOT&GND after the flashing is complete, then restart your device;. 4. Power the device'''Note''': For CM4 with eMMC, then open explore to login the pikvm web uiSD card cannot be used.
===Enable RTC ===
==Packing List==
* 1 x X650 V1.3 Expansion Board
* 1 x X680-A1 V1.0 cooling fan Adapter board
* 1 x Colorful ATX Control Cable (Cable Length: 47cm / 18.50 inch)