X1301

From Geekworm Wiki
Jump to navigation Jump to search

X1301 V1.1
X1301 V1.1 interface
X1301 V1.1
X1301 V1.1 with RPi 5B
X1301 V1.1 with RPi 5B
X1301 V1.1 with RPi 4B/3B


Overview

The X1301 HDMI to CSI-2 bridge with I2S audio interface is a specialized product tailored for the Raspberry Pi. It is equipped with the Toshiba TC358743XBG bridge chip and a one-to-two active HDMI splitter chip, enabling support for HDMI input and HDMI Pass-Through up to 1080P at a refresh rate of 60 fps.

With the HDMI Pass-Through feature, you can seamlessly output the HDMI signal (audio/video) from various source devices such as a Blu-ray Disc player, cable box, or satellite receiver to a TV or projector for local monitoring, even when the Raspberry Pi is in standby mode.


Geekworm HDMI to CSI Module Series:

Convert HDMI signal acquisition into CSI signal and I2S audio signal. The maximum capture resolution depends on the HDMI to CSI converter board as well as the Raspberry Pi hardware.


Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.

  • Raspberry Pi versions that support up to 1080P60Hz: CM3, CM4, Pi 5B
  • Raspberry Pi versions that support up to 1080P50Hz: zero, zero2, Pi3B, Pi4B, etc.
Picture Model Description Max Input Resolution I2S Audio HDMI Capture Chip PCB Dimension CSI-2 Connector Supported SOC
C779-Packing-List.jpg C779 HDMI to CSI-2 1080p50fps NO Toshiba TC358743XBG 35 x 50 mm 15-PIN FPC (pitch 1.0 mm) Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W
C790-Packing-List.jpg C790 HDMI to CSI-2 1080p60fps Yes Toshiba TC358743XBG 30 x 45 mm
  • 15-PIN FPC (pitch 1.0 mm) on the front of C790;
  • 22-PIN FPC (pitch 0.5 mm) on the rear of C790
 Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4
X630-Packing-List.jpg X630 HDMI to CSI-2 1080p50fps Yes, but I2S wiring or the X1300-A2 accessory board is necessary Toshiba TC358743XBG 30 x 42.4 mm 15-PIN FPC (pitch 1.0 mm) 4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W
X1300-V1.0-IMG-7645-Packing List.jpg X1300 HDMI RX to MIPI CSI-2-TX 1080p60fps Yes, but I2S wiring or the X1300-A2 accessory board is necessary Toshiba TC358743XBG 30 x 37.5 mm 22-PIN FPC (pitch 0.5 mm) Pi 5B / CM4 IO
X1301-V1.1-IMG-8060-Packing-List.jpg X1301 HDMI RX to MIPI CSI-2-TX HDMI loop output 1080p60fps Yes Toshiba TC358743XBG 57 x 85.5 mm 22-PIN FPC (pitch 0.5 mm) Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO
X1300-A2-IMG-8370-acce-1.jpg X1300-A2 I2S audio accessory board for X630 / X1300 1080p60fps This is a I2S audio accessory board - 57 x 65 mm -
  • work with X1300 HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board
  • work with X630 HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B

Applications

Here are some applications of HDMI to CSI (Camera Serial Interface) conversion:

  1. Digital Media Adapters: HDMI to CSI adapters allow HDMI cameras to be used just like standard Raspberry Pi CSI cameras. This is useful for digital media adapters that need to process HDMI input.
  2. Smart Monitors: Smart monitors can benefit from HDMI to CSI conversion, enabling them to accept HDMI video streams and integrate them into their display systems.
  3. Set-Top Boxes (STBs): STBs often require video input from various sources. HDMI to CSI conversion allows STBs to handle HDMI signals efficiently.
  4. Smart TVs: Some smart TVs may need to process HDMI input for features like picture-in-picture or video conferencing. HDMI to CSI bridges facilitate this integration.
  5. Entertainment Screens: Whether it's for gaming consoles, streaming devices, or other entertainment systems, HDMI to CSI conversion ensures compatibility with HDMI sources.
  6. KVM over IP: IP-KVM (Keyboard, Video, Mouse over IP) solutions using a Raspberry Pi, This bridge allows you to capture full HD video with low latency and supports H.264 video encoding of your desktop.


Remember that HDMI to CSI adapters are particularly useful when interfacing HDMI cameras with Raspberry Pi boards. They provide a seamless way to incorporate HDMI video streams into various applications.

Features

For use with
  • Raspberry Pi 5B
  • Raspberry Pi 4B
  • Raspberry Pi 3B+
  • Raspberry Pi 3B
Key Features
  • Capable of handling video formats up to 2K Full HD (1920x1080, 60fps)
  • Supports HDMI Pass-Through for local HDMI display
  • Equipped with the HDMI to CSI-2 bridge chip: Toshiba TC358743XBG
  • Supports MIPI CSI-2 with 4 data lanes, each with speeds of up to 1 Gbps per lane
  • Enables HDMI audio input and transmission over I²S
  • Prevents HDMI backpowering to the Raspberry Pi CSI
  • Features a CSI-2 connector: 22-pin FPC with 0.5mm pitch
  • Designed to be attached on top, allowing stacking with other HATs
  • Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down
  • Easily mountable on the Raspberry Pi, allowing you to customize your perfect case
Important Notes

The Raspberry Pi 4B, 3B+, and 3B do not support the HAT+ STANDBY power state, which means they cannot automatically turn off the X1301 when the Pi shuts down.

Technical Specification

Power supply: 5Vdc via 40-pin GPIO header & 3.3Vdc via FFC

Ports & Connectors:

  • HDMI video input connector x1 - Type-A 19-pin
  • HDMI Pass-Through connector x1 - Type-A 19-pin
  • MIPI connector x1 - 22pin 0.5mm pitch

MIPI cable length: 30mm

PCB Size: 57 x 85.5 mm

Packing List

  • X1301 V1.1 HDMI to CSI-2 module x1
  • 22-pin to 15-pin MIPI FFC 30mm x2 (For Raspberry Pi 4B/3B+/3B)
  • 22-pin MIPI FFC 30mm x2 (For Raspberry Pi 5B)
  • M2.5*19 F/F Spacer x4
  • M2.5*5 Screw x8

X1301-V1.1-IMG-8060-Packing-List.jpg

User Manual

FAQ

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=X1301&oldid=22076"