Template:Raspberry pi 5 SATA

From Geekworm Wiki
Revision as of 17:54, 3 March 2026 by Ruby (talk | contribs)
Jump to navigation Jump to search

Raspberry pi 5 SATA Series

*Caution:

  • The Matching Case section only indicates compatibility between the case, SATA HAT, Raspberry Pi Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.
  • In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).
Model Description Supported HDD/SSD Mounting Position Power Input Support NVMe Boot Matching Case Matching Cooler Product Matching Reference
X1100 USB to SATA 2.5" SATA HDD / SSD Bottom 5 VDC ±5%, 1.3 A via USB 3.0 port Yes X1100-C1 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510
X1006 PCIe to SATA 2.5" SATA HDD + M.2 SATA Key-B 2280 SSD Bottom 5 VDC ±5%, ≥ 3 A via FFC & pogo pins NO NO Case yet Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510
X1007 PCIe to SATA Dual SATA 2.5" HDD / SSD Bottom 5 VDC ±5%, ≥ 3 A via FFC & pogo pins NO NO Case yet Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510
X1008 PCIe to SATA 2.5" SATA HDD / SSD + 3.5" SATA HDD Shield Bottom 12 VDC ±5%, ≥ 3 A via 5521 DC power jack NO NO Case yet Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510
X1009 PCIe to SATA 5PCS 2.5" SATA HDD / SSD /3.5" SATA HDD Top

12 VDC ±5% via 5521 DC power jack

  • ≥3 A: 1×3.5" / 1×2.5" HDD
  • ≥5 A: 2×3.5" HDDs
  • ≥7 A: 3×3.5" HDDs
  • ≥9 A: 4×3.5" HDDs
  • ≥11 A: 5×3.5" HDDs
  • ≥4 A: 2×2.5" HDDs
  • ≥5 A: 3×2.5" HDDs
  • ≥6 A: 4×2.5" HDDs
  • ≥7 A: 5×2.5" HDDs
 NO NO Case yet Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510
Retrieved from "https://wiki.geekworm.com/index.php?title=Template:Raspberry_pi_5_SATA&oldid=24844"