Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 16:06, 28 April 2026 Ruby talk contribs uploaded File:X1202 pogo pin definition.jpg
• 16:03, 28 April 2026 Ruby talk contribs uploaded a new version of File:X1206-pogo-pin-definition.jpg (gpio)
• 15:16, 28 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1202 (In theory, it is supported.The DC Jack input of X1202 is 6–18V, with a required current ≥ 2A/3A. It works fine if your solar panel meets these specifications. However, direct solar connection is not recommended. Solar voltage fluctuates greatly, which will lead to unstable power supply, which is not good for the device.)
• 15:05, 28 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1206 (Hi, please refer to the picture [https://wiki.geekworm.com/File:X1206-pogo-pin-definition.jpg Pogo Pin Definition])
• 15:03, 28 April 2026 Ruby talk contribs uploaded a new version of File:X1206-pogo-pin-definition.jpg (add information)
• 14:55, 28 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1206 (电池持续高温的话不太正常。大电流充电时温度会高些，但这是短暂的；快充满后会进入涓流状态，温度不会高。这几年没人反馈说电池温度高，请确保使用合适的可充电电池。)
• 14:55, 28 April 2026 Ruby talk contribs performed unknown action "comments/delete" on X1206
• 18:37, 21 April 2026 Ruby talk contribs created page File:X1206-pogo-pin-definition.jpg
• 18:37, 21 April 2026 Ruby talk contribs uploaded File:X1206-pogo-pin-definition.jpg
• 11:17, 15 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1202 (The file has been sent, please check your inbox.)
• 14:55, 14 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1202 (Hi, could you please leave your email address? I will send the file to you via email.)
• 15:25, 13 April 2026 Ruby talk contribs performed unknown action "comments/add" on How to Configure RAID Setting (Hi, sorry there's no official tutorial for this, but here are some relevant discussions for reference: [https://rigacci.org/wiki/doku.php/doc/appunti/hardware/raspberrypi_nas_smart_hard_disk Raspberry Pi NAS: Hard disk management]. Hope this helps.)
• 17:51, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on Pi5-5V5APD (Sorry, there is no matching 3D-printed top part.)
• 17:48, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on LVDS Adapter (Hi! This is an analog audio interface, specifically a 4-pin, 2.0mm pitch vertical header connector. We apologize that we couldn't find a more universally recognized standard name for it.)
• 17:15, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on XScript (Hi, the gpioset error is likely caused by a mismatch between your OS and script version. Please refer to #Download the script to get the correct script branch for your system.)
• 17:04, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on AMPi (Thanks for sharing this info. We've updated it in the relevant note of X950 software.)
• 16:55, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1209 (There is no strict limit on the number of batteries in theory. However, the board limits the total charging current to 2.1A, and only 3.7V lithium batteries in parallel are supported.)
• 16:38, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1501 (Yes, it supports booting from CM5 eMMC storage. Please refer to the [https://suptronics.com/Raspberrypi/cm5/x1501-v1.0_software.html X1501 software] section "''How to Install OS on Raspberry Pi Compute Module 5 with eMMC Storage''". Also please note the jumper caution: Remove the jumper after programming, otherwise the system will fail to boot.)
• 16:28, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on KVM-A8 (Sorry, this function cannot be realized.)
• 16:00, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on X821 (Dear Bobby, Thank you very much for your detailed and helpful sharing. We take this seriously and will arrange tests accordingly. We'll update our Wiki as soon as we have the results.)
• 15:34, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1205 (Hi, sorry we don't have such a product at the moment. The X1206 can mostly meet your needs, except for the Type‑C output port (it can hold up to 4 batteries, but also works with just 2). Could you share your specific use case that requires a Type‑C output? We may have other alternative solutions for you.)
• 10:58, 11 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1300-A2 (Hi, sorry for the late reply, please refer to [https://suptronics.com/Raspberrypi/Interface/x1300-A2-v1.0_hardware.html X1300-A2 Hardware])
• 18:57, 10 April 2026 Ruby talk contribs performed unknown action "comments/add" on X735 (Hi, please refer to [https://wiki.geekworm.com/X735-script X735-script], hope this helps.)
• 18:51, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1507 (Sorry, based on the current information, we are unable to fulfill your request. If you could describe your situation and the specific problem you're facing — including what function you need to achieve and in which scenario — we may be able to find an alternative solution for you.)
• 18:47, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1300 Software (Hi, please follow the [https://suptronics.com/Raspberrypi/Interface/x1300-v1.0_software.html ''X1300-v1.0_software tutorial''] for troubleshooting: '''①Check if the hardware driver is enabled''' → Refer to tutorial Section 1.1: ''Enable the device tree overlay in /boot/firmware/config.txt'' '''②Verify EDID checksum validation''' → Refer to tutorial Sections 1.4–1.5: ''Create an EDID text file & load the EDID data'' '''③Confirm the correct media device node''' → Refer to tutorial Section...)
• 17:38, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Hi, ①The ACT LED lights up solid when the X1001 is powered on, indicating normal power/standby status. ②It flashes when the SSD is reading or writing data. ③There used to be a dedicated PCIe LED that stayed on when the SSD was detected. However, it was removed to comply with the official PCIe specification from the Raspberry Pi Foundation.)
• 17:22, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Hope this information helps.)
• 17:21, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (First, we don't recommend using high-end controllers on PCIe Gen 2.0 platforms. On one hand, it results in performance overkill; on the other, a few controllers are not backward compatible with PCIe Gen 2, which can easily cause instability and compatibility problems. Second, an unrecognized SSD does not always mean a compatibility issue—other factors may be at play. You can try these troubleshooting steps: :①The FFC cable only provides a maximum of 5W power, which is insufficient for SSDs...)
• 15:36, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (Sorry for the late reply. Hope this information helps: :*30 Pin: 1080P EDP IN, FFC-30PIN-0.5 :*40 Pin: 4K EDP IN, FFC-40PIN-0.5 Differential data pairs in the EDP cable should use twisted-pair wiring.)
• 15:18, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1004 (Hope this information helps, and sorry again for my earlier response.)
• 15:12, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1004 (Sorry for the late reply. I've received your comment and take it very seriously, so I immediately double-checked with our technical team. ① First, my apologies — my earlier reply was not professional enough. The X1004 uses the ASMedia ASM1182e PCIe switch, which only supports PCIe Gen 2.0 (5Gbps) and does NOT support PCIe Gen 3.0 speeds. This may lead to certain compatibility issues. ② Recommended compatible SSDs: *'''Models with good PCIe Gen 2.0 compatibility and power consumption under...)
• 14:47, 3 April 2026 Ruby talk contribs created page Template:X120x Series UPS Script Reference (Created page with "This section includes two types of script resources for debugging and adapting X120x series UPS HATs. Official scripts are factory-adapted basic versions, while open-source pr...")
• 18:42, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on X728-script (We officially only provide sample code for reading battery voltage and percentage (please refer to section [https://wiki.geekworm.com/X728-Software ''6: How to read battery voltage and percentage; you can modify it as per your requirements'']). Additionally, the [https://github.com/NicciZar/HA-Geekworm_X728 relevant open-source scripts] shared by users may help you (for reference only).)
• 17:58, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1202 (Thanks a lot for your kind sharing and support! This is very helpful.)
• 17:55, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on KVM-A3 (40 GPIO pins are reserved. OLED, RTC and ATX control adopt dedicated small headers (like 4-pin for OLED, 10-pin for I2S audio).)
• 17:22, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on P173 (Yes, we do have the RoHS documents.)
• 17:03, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Sorry for the late reply. The main problem is compatibility. Your Crucial P310 is a PCIe Gen4 SSD with a Phison controller that cannot work at lower speeds, so the Raspberry Pi 5's native PCIe port cannot detect it. The X100x is just a PCIe adapter, which only changes the port shape and does not affect compatibility at all. The real issue is that this SSD does not work with the Raspberry Pi 5 itself. We recommend using another SSD that fully supports the Raspberry Pi 5’s native PCIe interf...)
• 18:46, 31 March 2026 Ruby talk contribs performed unknown action "comments/add" on X1202 (Hello! We can only offer script samples for reference. Please customize your own script based on their syntax and structure. [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html Click here for details ] (Key reference: 6.0 Control battery charging - for advanced users only))
• 18:57, 27 March 2026 Ruby talk contribs performed unknown action "comments/add" on X1004 (Your SSD uses a Phison controller, which is highly likely to be incompatible. We apologize that we cannot provide a full compatibility list, as there are simply too many SSD models on the market for us to test individually. The X100x series is only a PCIe adapter and does not affect compatibility. The root issue is the compatibility between the Raspberry Pi 5 and the SSD itself. Please refer to the official Raspberry Pi documentation, together with the information below, to check compatibi...)
• 18:57, 27 March 2026 Ruby talk contribs performed unknown action "comments/delete" on X1004
• 18:56, 27 March 2026 Ruby talk contribs performed unknown action "comments/add" on X1004 (Your SSD uses a Phison controller, which is highly likely to be incompatible. We apologize that we cannot provide a full compatibility list, as there are simply too many SSD models on the market for us to test individually. The X100x series is only a PCIe adapter and does not affect compatibility. The root issue is the compatibility between the Raspberry Pi 5 and the SSD itself. Please refer to the official Raspberry Pi documentation, together with the information below, to check compat...)
• 18:32, 27 March 2026 Ruby talk contribs performed unknown action "comments/add" on X1201 (Thank you for your feedback and contribution to the forum! We truly appreciate it.)
• 18:32, 27 March 2026 Ruby talk contribs performed unknown action "comments/delete" on X1201
• 18:32, 27 March 2026 Ruby talk contribs performed unknown action "comments/add" on X1201 (Thank you for your feedback and contribution to the forum! We truly appreciate it.)
• 12:11, 27 March 2026 Ruby talk contribs performed unknown action "comments/add" on PiKVM (你好，请见KVM-A3页面的FAQ，第二个提问[https://wiki.geekworm.com/KVM-A3#Enable_OLED_display "Why OLED is not display?"]里有详细的教程指引。 ---- Please check '''the second question in the FAQ section''' on the KVM-A3 wiki page – it's the one titled [https://wiki.geekworm.com/KVM-A3#Enable_OLED_display '''Why OLED is not display?'''], which has a detailed tutorial for troubleshooting.)
• 16:53, 20 March 2026 Ruby talk contribs performed unknown action "comments/add" on T208-hardware (That's great! Thanks so much for sharing your awesome mod with everyone — really helpful for the community!)
• 16:51, 20 March 2026 Ruby talk contribs performed unknown action "comments/add" on N310 (Извините, ваше сообщение затерялось среди обновлений, поэтому мы не ответили вовремя. Достаточно одного слоя термопрокладки. Sorry, your message was overlooked among the updates, so we didn’t reply in time. One layer of thermal pad is enough.)
• 16:51, 20 March 2026 Ruby talk contribs performed unknown action "comments/delete" on N310
• 16:50, 20 March 2026 Ruby talk contribs performed unknown action "comments/add" on N310 (Извините, ваше сообщение затерялось среди обновлений, поэтому мы не ответили вовремя. Достаточно одного слоя термопрокладки. Sorry, your message was overlooked among the updates, so we didn’t reply in time. One layer of thermal pad is enough.)
• 16:40, 20 March 2026 Ruby talk contribs performed unknown action "comments/add" on X735-script (Since the information provided is limited, we suggest starting with basic troubleshooting: 1. Check if you have selected the correct software script branch for your system. 2. If using a Raspberry Pi 5, verify that the correct PWM number is configured. 1. First, check your system information (Codename) with this command (e.g.): <pre> pi@geekworm:~ $ lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 13 (trixie) Release: 13 Codename: trixie <...)