N500
Contents
Overview
This is a metal case specially designed for Orange Pi Zero 2, we name it as N500. It reserves all the interfaces of the orange pi zero 2 motherboard, supports the 3010 5v cooling fan, supports the extraction of the GPIO cable, and also reserves 2 antenna holes for you to facilitate the installation of external antenna and build-in antenna.
Note: Only compatible with Orange Pi Zero 2, NOT compatible with Orange Pi Zero!!!!
| Model | Compatible with | NVMe SSD Support |
|---|---|---|
| N515 | Orange Pi 5 Pro / Orange Pi 5 Max | Yes, support to mount 2280 length SSD inside the case for Orange Pi 5 Pro |
| N510 | Orange Pi 3B v1.1 only, NOT Orange Pi 3B v2.1 | Yes. |
| N508 | Orange Pi 5 Plus | Yes. |
| N506 | Orange Pi 5/5B | Yes, support to mount 2280 length SSD inside the case for Orange Pi 5. |
| N505 | Orange Pi 5/5B | Yes, BUT NOT support to fix 2280 SSD to Case. |
| N502 | Orange Pi Zero 3 | No. |
| N500 | Orange Pi Zero 2 | No. |
Features
- High quality metal material with surface galvanized process;
- All ports and slots of the case can match with orange pi zero 2 board perfectly
- Good heat dissipation, can use 3010 5V active cooling fan and 4pcs passive aluminum heatsink at the same time.
- Reserved GPIO cable hole
- 2 antenna holes are reserved to facilitate the installation of external antenna and build-in antenna
- Case Dimensions: 70 x 57 x 35mm/2.75 x 2.44 x 1.37inch
- with mounting hole (50mm distance), you can hang it on the wall or somewhere you want.
How to Connect the Cooling Fan
Packing List
- 1 x N500 Metal Case
- 1 x 3010 Cooling Fan
- 1 x 4pcs Aluminum Heatsinks(silver)
- 4 x KM3*14 screws(for Fan)
- 4 x M2.5 Copper nuts
- 4 x M2.5x5+5mm spacers
- 4 x KM2.5x4mm screws
- 1 x 4pcs Rubber Pads(black)
User Manual
N500 Installation Video: https://youtu.be/YwuHC2gcyDU
Enable comment auto-refresher