Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

07:31, 26 April 2022 72.215.159.34 talk performed unknown action "comments/add" on X735 (Found the problem and fixed it. The red/black wire was straight through when I received it. I was able to reverse the wire and it turned on. Video gave me the hint. All good.)
06:56, 26 April 2022 72.215.159.34 talk performed unknown action "comments/add" on X735 (Hello, I'm using X735 v3.0 with X832. I followed through with the video and removed the jumper from X832. It will not power on. X832 powers up fine without X735.)
05:02, 26 April 2022 185.128.194.66 talk performed unknown action "comments/add" on NASPi (So if we cant add xoff to crontab how can we perform a timed shutdown ?) Tags: Mobile edit Mobile web edit
23:06, 25 April 2022 212.51.151.132 talk performed unknown action "comments/add" on X-C1 Software (Hi after run x-c1-softsd.sh my NASPI start to shutdown and powers off after 4 seconds. That seems to be not long enogh for my raspberry os to properly shut down and reach the power off target. My NASPI powers off while systemd is still busy to stop all the processes. Is there a way to extend the time between start the shutdown and power off or even better: check if systemd power off target is reached before power off ? thx best regards Andi)
19:13, 25 April 2022 Cindy talk contribs uploaded a new version of File:X880-A3-01.jpg
15:33, 25 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728-Software (Hello， SORRY, libreElec is the readonly image, so don't install our python script.)
15:16, 25 April 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (Hello，It's a 4010 PWM Fan-3Pin for NASPi. you can buy it from herehttps://geekworm.com/collections/raspberry-pi/products/dc-5v-30mm-40mm-50mm-60mm-cooling-fan?variant=39567352660056)
02:23, 25 April 2022 87.4.53.214 talk performed unknown action "comments/add" on X-C1 Software (after 4 months the fan start to make noise and doesn't have the same performance anymore. Please can someone tell me what model it is, or something compatible? some link where I can buy it, i tried another fan but is working always at max power)
00:11, 25 April 2022 87.159.114.47 talk performed unknown action "comments/add" on X728-Software (Hello, I want to use the X728 v2.1 device with the Libreelec/Kodi distribution. Is there a way or a guide to install the software? The device works flawlessly on Raspian OS. Thanks)
18:11, 24 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi，Miguel ①Please do not use USB Type-C and DC Jack power to X728 at the same time. ②When the input voltage is lower than about 4.2~4.5, gradually switch to battery power supply)
17:53, 24 April 2022 46.126.173.109 talk performed unknown action "comments/add" on M200 (Is the aliexpress geekworm official store a good place to buy one?) Tags: Mobile edit Mobile web edit
17:47, 24 April 2022 46.126.173.109 talk performed unknown action "comments/add" on M200 (Thank you for answer I will buy an M200 board when the raspberry pi zero 2 w is back in stocks) Tags: Mobile edit Mobile web edit
17:30, 24 April 2022 Lisa talk contribs performed unknown action "comments/add" on M200 (Hi, M200 is JUST a Gigabit Ethernet expansion board,and has nothing to do with the operating system.Whether the operating system is compatible depends on the Raspberry Pi motherboard.)
17:22, 24 April 2022 46.126.173.109 talk performed unknown action "comments/add" on M200 (Is it also compatible with the volumio operating system) Tags: Mobile edit Mobile web edit
17:22, 24 April 2022 Lisa talk contribs performed unknown action "comments/add" on CM4 to CM3 Adapter (Hi，please refer the picture[Interface definition diagram]; CM4 has gpio0,gpio1; ID_SD of CM4 corresponds to GPIO0, ID_SC is GPIO1)
15:17, 24 April 2022 189.202.90.169 talk performed unknown action "comments/add" on X728 (Good day, Can both input power supplies (USB Type-C and DC Jack) be used at the same time? What would happen if one (or both) of the input's voltage or current drops below the specification? I believe in the event where both the first, and second power supply inputs requirements fail, the AC FAIL LED will light up and the board will now use it's 18650 batteries. Is it safe for the board to receive an input below the requirements? e.g. solar panels outputting 0V at night, or below 5V and be...) Tags: Mobile edit Mobile web edit
22:35, 23 April 2022 105.247.129.114 talk performed unknown action "comments/add" on CM4 to CM3 Adapter (Hi, trying to connect the official 7-inch LCD. The LCD is set up using I2C on pin3 and pin5 on the CM3, but you have GPIO0 and GPIO1 connected to these pins. According to the CM4 datasheet, there are no GPIO0 nor GPIO1... 2 Questions: 1) Is the I2C connected? If yes, where? 2) To which pins on the CM4 are pin3 and pin5 on the SODIMM connector connected to?)
12:12, 22 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， Short the AON pin； after shutting down, the Raspberry Pi will not restart automatically if the power supply is not replugged in or unplugged. But AON function detection is more sensitive, if it detects a voltage, it will automatically turn on.and we will improve this feature in the future.Thanks~)
10:58, 22 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， The size of the button top batteries may be a bit large. you can use flat top batteries. please refer to：X728-hardware#18650 battery dimension;Please buy the correct size battery.)
16:16, 21 April 2022 189.217.0.185 talk performed unknown action "comments/add" on X728 (Hi, both button top and flat top batteries woudl fit right?)
10:25, 20 April 2022 114.167.187.215 talk performed unknown action "comments/add" on X728 (Is it a specification that the UPS does not power down after the RPI shuts down successfully using the X728? Due to this phenomenon, RPI does not start even if power is supplied to the UPS after shutdown. The AON pin is set to short.)
18:38, 19 April 2022 Abby talk contribs deleted page File:X880-IMG-0042-interface-New.jpg
18:38, 19 April 2022 Abby talk contribs created page File:X880-Interface.jpg
18:38, 19 April 2022 Abby talk contribs uploaded File:X880-Interface.jpg
16:48, 19 April 2022 Lisa talk contribs performed unknown action "comments/add" on CM4 to CM3 Adapter (Hi， Please refer CM4 to CM3 Adapter#FAQQ2)
23:06, 18 April 2022 107.203.254.12 talk performed unknown action "comments/add" on CM4 to CM3 Adapter (It does work with the CM4.)
11:54, 18 April 2022 107.203.254.12 talk performed unknown action "comments/add" on CM4 to CM3 Adapter (Would this work with the CM4 Lite? (No eMMC)) Tags: Mobile edit Mobile web edit
11:46, 18 April 2022 Lisa talk contribs performed unknown action "comments/add" on M200 (Hi， Yes，because of the size of the M200 board, even if the case retains the SD card slot, it cannot be used. So we didn't design SD card slot. If you have any better suggestion, please let us know. Thanks~)
10:57, 18 April 2022 Lisa talk contribs performed unknown action "comments/add" on X857 (Hi， Could you provide a test video, or some pictures，please？please Email to support@geekworm.com； and let us know your order No，Thanks！)
00:26, 18 April 2022 50.35.78.224 talk performed unknown action "comments/add" on X857 (Hi Lisa, Yes, using GPIO to power Pi4 and USB 3.0 for the SSD. Still no luck. All works when running completely from battery. But external PSU into the UPS HAT and charging is happening, then the SSD will randomly disconnect, and I lose data on the SSD. Cause me to have to reflash. Still unable to get this to work, tried all power connectivity options from the UPS board to the SSD, either via a direct link or via the USB 3.0. Problem is the same. Thanks)
17:05, 17 April 2022 80.187.65.65 talk performed unknown action "comments/add" on M200 (im Gehäuse kein Schlitz für Mikro-SD Karte vorhanden :-()
17:25, 15 April 2022 Harry talk contribs created page Raid Instruction (Created page with "{{GD Template Impl}} 800px  <comments />  <!--Remove other categories, just keep the app...")
17:18, 15 April 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi (Hello， xoff cannot be added in crontab.)
16:17, 15 April 2022 Abby talk contribs deleted page File:NASPi2-05.jpg (Deleted old revision 20220415075930!NASPi2-05.jpg)
15:59, 15 April 2022 Cindy talk contribs uploaded a new version of File:NASPi2-05.jpg
15:33, 15 April 2022 Abby talk contribs created page File:NASPi-Gemini-Inner.jpg
15:33, 15 April 2022 Abby talk contribs uploaded File:NASPi-Gemini-Inner.jpg
15:33, 15 April 2022 Abby talk contribs deleted page File:NASPi2-02.jpg
15:29, 15 April 2022 Abby talk contribs created page File:NASPi-Gemini-Packing-list.jpg
15:29, 15 April 2022 Abby talk contribs uploaded File:NASPi-Gemini-Packing-list.jpg
15:28, 15 April 2022 Abby talk contribs deleted page File:NASPi2-03.jpg
15:27, 15 April 2022 Abby talk contribs created page File:X882-V1.3-socket-indication.jpg
15:27, 15 April 2022 Abby talk contribs uploaded File:X882-V1.3-socket-indication.jpg
15:27, 15 April 2022 Abby talk contribs deleted page File:X882 V1.3-IMG-2870-Interface indication.jpg
15:26, 15 April 2022 Abby talk contribs deleted page File:X882 V1.3-IMG-2870-Interface indication.jpg (Deleted old revision 20220415005808!X882_V1.3-IMG-2870-Interface_indication.jpg)
15:26, 15 April 2022 Abby talk contribs deleted page File:X882 V1.3-IMG-2870-Interface indication.jpg (Deleted old revision 20220411102901!X882_V1.3-IMG-2870-Interface_indication.jpg)
15:15, 15 April 2022 Cindy talk contribs moved page NASPi2 to NASPi Gemini
14:10, 15 April 2022 Lisa talk contribs performed unknown action "comments/add" on X630 (Hi， Sorry，there are currently no 3D printed case for X630.)
14:10, 15 April 2022 Lisa talk contribs performed unknown action "comments/delete" on X630
14:10, 15 April 2022 Lisa talk contribs performed unknown action "comments/add" on X630 (Hi， Sorry，there are currently no 3D printed case for X630.)