X857-C3

X857-C3 Front

X857-C3 Back

X857-C3 Interface

X857-C3

X857-C3

X857-C3

Overview

Due to X857 V1.2 X862 V1.0 X872 are be upgraded to new version, so we must also upgraded the matching metal case.

This case is only support X862 V2.0, X857 V2.0, X873(Only support X873 produced or shipped before May 2021).(X873 produced after May 2021 use longer 6mm USB3 connector with mark 2113 on the USB3 connector, not support X857-C3.) Please refer to X857-C1 if you are using X857 V1.2, X862 V1.0, X872 V1.1.

Some changes:

• We reduced the height of the case by 3mm;
• We adjusted the position of SSD led;
• No more

This is new version X857-C3 metal case with power control switch and super mute cooling fan designed for Raspberry Pi 4 Model B and X857 V2.0 mSATA SSD Shield/ X862 V2.0 M.2 NGFF Shield/ X873 NVME M.2 Shield.

Please note that the X857-C3 case DON'T SUPPORT X857 V1.2 / X862 V1.0 / X872 V1.1. DON'T SUPPORT X873 produced or shipped after May 2021.

It supports X735 installation for intelligent power management and cooling your Raspberry Pi, also supports X708/U100 UPS with battery holder installation for UPS function. The equipped cooling fan is installed on the side of the battery holder to provide better heat dissipation.

[NOTE]

X857-C3 is sold out, and we have no plans to produce it,for x857-c3 3D drawings, please refer to:File:X857-c3 asm-1231.stp

Features

• High quality metal material with surface galvanized process
• Equipped with super mute cooling fan
• Equipped with power switch with beautiful LED indicator to control the power of X857 V2.0/X862 V2.0 and the Raspberry Pi 4; (LED indicator can be disable)
• Easy to install, all main connectors are easily access to use;
• Case Size(Installation): 11.4cm x9.5cm x 5.5cm / 4.48inch x 3.74inch x 2.16inch
• Supports X735 installation for intelligent power management and cooling your Raspberry Pi
• Supports X708/U100 UPS with battery holder installation for UPS function
• Supports battery holder installation for UPS function

Packing List

• 1 x X857-C3 Metal Case
• 1 x Cooling Fan(4010)
• 1 x Power Control Switch
• 1 x Screws Pack
• 1 x Screw Driver

User Manual

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

24 months ago

Score 0

I've had this case for a while, but now the momentary switch light isn't turning on. Any suggestions on how to enable it or at least troubleshoot the issue?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

24 months ago

Score 0

Please check if the wiring is correct? blue wire for‘+ ’；white wire for‘-’

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

24 months ago

Score 0

It uses the same momentary switch that came with the case.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

24 months ago

Score 0

I just received a v3.0 of the 735 and it works as expected: light turns on and pressing the button works. With the 2.5 none of that happens.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

24 months ago

Score 0

Even the power LED on the v2.5 doesn't turn on.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

24 months ago

Score 0

X735 V2.5 has two switch interfaces, momentary switch and Latching switch. Please check that the correct interface is connected. If it still doesn't work, please contact us ： support@geekworm.com

Permalink