Recent changes
Jump to navigation
Jump to search
Track the most recent changes to the wiki on this page.
List of abbreviations:
- N
- This edit created a new page (also see list of new pages)
- m
- This is a minor edit
- b
- This edit was performed by a bot
- (±123)
- The page size changed by this number of bytes
19 October 2024
|
|
13:34 | (Comments log)[85.233.54.182; 107.181.178.67; 78.90.162.24 (2×)] | |||
|
|
13:34 107.181.178.67 talk posted a new comment on NASPi Gemini 2.5 (OMV 7 no longer allows USB devices in their software raid. This is intentional and unfortunately your Gemini bridge boards fall into that category. Your hardware raid works fine for me anyway.) | ||||
|
|
06:35 85.233.54.182 talk posted a new comment on X1001 (Can confirm WD 1 TB SSD PC SN730 works, and boots fine) | ||||
|
|
04:49 78.90.162.24 talk posted a new comment on X1011 (Sorry but I can't find way editing my comment. It is Markdown formatted but it is looking ugly as comment section seems not interpret it well.) | ||||
|
|
04:46 78.90.162.24 talk posted a new comment on X1011 (In case someone battling making NAS with large NVMEs... I'm almost 100% sure that 1A@5V(5.00W) is not enough for powering them. Example below is from 4x(Shenzhen Longsys Electronics Co., Ltd. Lexar NM790 NVME SSD (DRAM-less) (rev 01)). ``` # smartctl -c /dev/nvme0 smartctl 7.4 2023-08-01 r5530 [aarch64-linux-6.11.0-1004-raspi] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Firmware Updates (0x14): 2 S...) | ||||
18 October 2024
|
|
23:54 | (Comments log)[46.138.82.4; 176.109.211.22; 128.2.149.23] | |||
|
|
23:54 128.2.149.23 talk posted a new comment on X-UPS1 (Does this UPS handles and protect against reverse current on its output port? If there is current coming back from the output port, will the board still be able to handle it?) Tags: Mobile web edit, Mobile edit | ||||
|
|
06:47 176.109.211.22 talk posted a new comment on X735 Software (I get the following error message raspi 4 Okt 18 00:43:11 touscre rc.local[329951]: cat: /sys/class/gpio/gpio5/value: Datei oder Verzeichnis nicht gefunden Okt 18 00:43:11 touscre rc.local[2818]: /etc/x735pwr.sh: Zeile 17: [: =: Einstelliger (unärer) Operator erwartet. Okt 18 00:43:11 touscre rc.local[2818]: /etc/x735pwr.sh: Zeile 21: [: =: Einstelliger (unärer) Operator erwartet. Can you Help ? Greetings Uwe) | ||||
|
|
03:52 46.138.82.4 talk posted a new comment on X1012 (Can X1012 charge X1202 batteries via POE?) | ||||
17 October 2024
|
|
23:34 | (Comments log)[46.138.82.4 (2×)] | |||
|
|
23:34 46.138.82.4 talk posted a new comment on X1202 ("Capacity: 8.34% (Medium), AC Power State: Unplugged, Voltage: 3.67V Battery level critical." But 3 green LEDs are on) | ||||
|
|
17:51 46.138.82.4 talk posted a new comment on X1202 ("Capacity: 65.42% (Full), AC Power State: Unplugged, Voltage: 3.90V UPS is unplugged or AC power loss detected." If I connect POE via x1012 to rpi5 with x1202, it seems like the adapter is not connected, but 4 green LEDs are on. Is it ok or something wrong?) | ||||
16 October 2024
|
|
23:15 | (Comments log)[128.2.149.101 (3×)] | |||
|
|
23:15 128.2.149.101 talk posted a new comment on X-UPS1 (In addition to the previous question: I plan to use two of these UPS boards, stacked together whole having power input (12V 10A) power supply connected for most of the time. The idea is to continue provide power to the 12V 4A motor, even when the power supply is disconnected. Will this work? With the power input connected, if the output side is drawing 4A, it can still draw 4A from the power supply, right?) | ||||
|
|
22:33 128.2.149.101 talk posted a new comment on X-UPS1 (Also, my current plan is to use two of these UPS board, stacked together to provide UPS capability to a 12v 4a motor, will there be any issue? Also if the system is not powered, and I turn the motor, the motor generate power. Does the board protect against any "backward" current produced by rotating the downstream motor??) | ||||
|
|
00:38 128.2.149.101 talk posted a new comment on X-UPS1 (Following the previous question: If I stack 2 of these boards together: I know output current is subject to the quantity of boards. But can I use 12V output (VH3.96 x 2) port coming out from both boards, so (VH3.96 x 4) all at once to get the full current output?) | ||||
15 October 2024
| 03:39 | Comments log 128.2.149.101 talk posted a new comment on X-UPS1 (If I stack 2 of these boards together. 1) Can I supply power input through both the DC barrel connectors on both boards when stacked? 2) Can I use 12V output from both boards, to get the full current output? 3A x 2boards?) | ||||
14 October 2024
|
|
23:34 | (Comments log)[185.78.11.142; 185.7.196.6; 155.31.35.78; 124.244.111.67] | |||
|
|
23:34 155.31.35.78 talk posted a new comment on EDP to HDMI Adapter (I'm still trying to figure out how to plug in the edp cable into the board. Every time the wire makes contact, the board heats up and burns.) | ||||
|
|
22:07 124.244.111.67 talk posted a new comment on NASPi CM4-M2 (How to connect a 4-pin PMW fan to the board? Please help. NASPi is very hot, always keep in 70c. Passive cooling is not practical for a NAS server.) | ||||
|
|
14:34 185.7.196.6 talk posted a new comment on X1011 (Same for me - doesn't work) | ||||
|
|
01:54 185.78.11.142 talk posted a new comment on X1011 (Update, I have change from the RPi 25w USB PSU to a 50w PSU direct to the x1011. I am using Open Media Vault and when a drive disappears it comes back after a reboot and after a second reboot the RAID 5 array is "clean" again...) | ||||
13 October 2024
| 04:38 | Comments log 45.88.221.129 talk posted a new comment on X-UPS1 (Can you please explain how to wire a LED to the PLD LBAT port?) | ||||