X1300 Hardware

Required hardware

The X1300 is only one accessory in the usage scenario, to complete the basic functionality, other accessories such as a PD27W power supply, a Raspberry Pi 5 motherboard, a PCIe PIP boards((such as X1001,X1002,X1003,X1000, M901, N400, N300)) or an SD card may be required.

When you choose PCIe PIP boards, pay attention to the height of the copper pillars installed in the X1300 accessories. The height of the copper pillars used in the X1300 is 17mm. You need to avoid using the same height as the PCIe PIP board.

Hardware installation

Return to X1300

Enable comment auto-refresher

Anonymous user #2

one month ago

Score 0

x1300 I bought it for Pi5. I reinstalled Python 3 times in 2 days. Every time I couldn't get past step 5. I upload EDID data. I uploaded different configurations. I installed the camera. Another adapter works on my Pi4. Please help. What am I doing wrong or is there a problem with the product? Failed to open /home/pi/1080P60EDID.txt: No such file or directory

Permalink | Reply

Lisa

29 days ago

Score 0

Hello， Please contact us by email： info@geekworm.com

Please tell us your order number and send us a screenshot.

Permalink

Anonymous user #1

one month ago

Score 0

Does not work with my Rp v5. Fails at step 9 of instructions 9. Set formats

media-ctl -d /dev/media2 -l \csi2'\:4 -> '\rp1-cfe-csi2_ch0'\:0 [1]' media-ctl -d /dev/media2 -V \csi2'\:0 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]' media-ctl -d /dev/media2 -V \csi2'\:4 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]'

Several emails/contact forms sent to support. No reply from Tech support as of yet.

Permalink | Reply

Lisa

one month ago

Score 0

Hello,We have replied to your email on the same day we received it. Maybe it was ignored or sent to spam, please check your mailbox again. and we have updated the information in step 9. Please test againX1300 Software

Permalink