NASPi Gemini 2.5
Contents
Overview
Geekworm NASPi2 is an ultra-compact dual 2.5 inch SATA HDD/SSD NAS storage kit with safe shutdown and auto power on function that specially designed for Raspberry Pi 4 Model B computer, it allows two pcs 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. Also support use with one single 2.5" SATA HDD/SSD.
The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
NASPi2 is composed of three parts: X882 dual 2.5" SATA HDD/SSD shield, X882-C1 metal case and heat dissipation system(3Pin 4010 PWM fan with metal bracket). To get better heat dissipation of NASPi2, it also support install Max 7mm thickness heatsink above Pi4, as we use the M2.5*11+6mm spacers to fix the PWM fan with bracket.There is space for extra heatsink installation on Pi4.
Features
- Ultra-compact NAS storage solution for Raspberry Pi 4 with Dual 2.5" SATA HDD/SSD
- For use with Raspberry Pi 4 Model B only
- UASP supported only, do not support TRIM
- Supports dual 2.5 SATA HDDs/SSDs working at the same time
- Support Max 16mm thickness 2.5" SATA HDD/SSD installation
- Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
- LED blue indicator(HDD1,HDD2) indicates each drive status
- Support auto power on function by jumper setting
- Support safe shutdown function(Integrated on X882, do not need extra expansion board)
- Support connecting 3pin PWM fan for cooling
- Support RAID setup by jumper setting
- NASPi2 Dimensions:167*112*61mm/ 6.57*4.41*2.40inch
- With on board power button to control power on/off
On board switch with LED light
- Press button switch to turn on
- Press button switch and hold for 1~2 seconds to reboot
- Press button switch and hold for 3 seconds to implement safe shutdown
- Press button switch and hold for more than 8 seconds to force shutdown
Note about SSD/HDD
- Do not recommend using Samsung hard drives, please use hard drives of other brands.
- As with all SSDs, new SSD/HDD must be formatted before use.
- Older SSD drives with less efficient flash media may not perform as well as newer drives.
- A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition
Power Supply
- Via Type-C port of X882, 5.1Vdc +/-5% , ≥4A(Geekworm Type-C 5V 4A 20W power supply is recommended.)
- Via DC5521 Jack of X882, 5.1Vdc +/-5% , ≥4A (DC5525 Jack is compatible with DC5521, also support 5V PSU with DC5525 Jack)
Note about PSU: Please use high quality power adapter, or the HDD/SSD may cannot be recognized. Since NASPi2 can install two pcs 2.5 inch hard drives, it needs a high-quality power supply to provide enough current.
Packing List
- 1 x X882 V1.3 Dual 2.5 SATA SSD/HDD Shield
- 1 x X882-C1 Metal Case
- 1 x 3pin 4010 PWM fan with metal bracket
- 1 x screws pack
Enable comment auto-refresher
Anonymous user #22
Permalink |
Anonymous user #21
Permalink |
Lisa
Anonymous user #20
Permalink |
Lisa
Anonymous user #19
Permalink |
Lisa
Anonymous user #18
Permalink |
Walker
Anonymous user #17
Permalink |
Walker
Anonymous user #16
Permalink |
Walker
Anonymous user #9
Permalink |
Walker
Lisa
Anonymous user #15
Permalink |
Walker
Anonymous user #14
Permalink |
Walker
Anonymous user #13
Permalink |
Walker
Walker
Harry
Anonymous user #12
Permalink |
Walker
Harry
Anonymous user #11
Permalink |
Harry
Anonymous user #10
Permalink |
Walker
Anonymous user #9
Permalink |
Anonymous user #8
Permalink |
Harry
Anonymous user #8
Permalink |
Harry
Anonymous user #7
Permalink |
Anonymous user #6
Permalink |
Anonymous user #6
Permalink |
Harry
Anonymous user #6
Permalink |
Lisa
Anonymous user #6
Permalink |
Lisa
Anonymous user #6
Anonymous user #6
Anonymous user #5
Permalink |
Lisa
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Lisa
Anonymous user #2
Permalink |
Lisa
Anonymous user #2
Anonymous user #1
Permalink |
Lisa
Anonymous user #1
Lisa