X862 V2.0
Jump to navigation
Jump to search
Overview
This is new updated X862 V2.0 version from X862 V1.0.
Some changes:
- We removed the DC JACK power socket of X862 V2.0, X862 V2.0 is powered via USB 3.0 connector.
- We have solved the EMC interference issue between Raspberry Pi 4 and USB3.0 device ON X862 V2.0.
- But if you use a metal shell like X857-C3, then you can only use 5.8G wifi AP, 2.4G wifi will not be available(be shielded by metal case);
- As a Raspberry pi NAS device, we advised that you use ethernet network to replace wifi, this will be more stable and reliable.
The X862 V2.0 M.2 NGFF SATA SSD Shield is designed for Raspberry Pi 4 model B, it provides a complete storage solution for Raspberry Pi 4. New X862 V2.0 ONLY support M.2 NGFF SSD Key-B 2280 length. The X860 V2.0 support UASP for Raspberry Pi 4.
Features
FOR USE WITH |
Raspberry Pi 4 Model B |
Operating System |
All Raspberry Pi operating systems |
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
|
Packing List
- 1x X862 M.2 NGFF SATA SSD Shield
- 1x USB3.1 jumper
- 4x Screw M2.5 *6mm
- 4x Spacer M/F M2.5 *7+6mm
- 4x Spacer F/F M2.5 *9.5mm
- 1x Screw driver
- 1x Screw M2 *4mm
Matching Metal Case
Please refer to X857-C3.
Note: The case of X862 V1.0 and X862 V2.0 are different. X862 V1.0 should use X857-C1 Case, but X862 V2.0 use X857-C3 Case.
User Manual
- About USB boot please refer to Does the X825/X855 support USB boot
- Tutorial – How to Initialize, Partition and Format a Brand New SSD in Windows: File:Tutorial Initalize New SSD.pdf
Enable comment auto-refresher
Anonymous user #11
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Lisa
Anonymous user #6
Permalink |
Anonymous user #6
Lisa
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Lisa
Anonymous user #2
Permalink |
Cindy
Anonymous user #1
Permalink |
Cindy
Anonymous user #9