Difference between revisions of "Template:PCIe to NVME Sets"
Jump to navigation
Jump to search
(3 intermediate revisions by one other user not shown) | |||
Line 3: | Line 3: | ||
After the release of the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit], we tested four PIPs: [[X1001]], [[X1004]], [[X1011]], and [[M901]]. X1001, X1004, and M901 all support the hailo-8 ai accelerator, but X1011 does not. | After the release of the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit], we tested four PIPs: [[X1001]], [[X1004]], [[X1011]], and [[M901]]. X1001, X1004, and M901 all support the hailo-8 ai accelerator, but X1011 does not. | ||
− | It should be noted that [[X1004]] uses [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, | + | It should be noted that [[X1004]] uses [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, and [[X1011]] uses [https://www.asmedia.com.tw/product/556yQ9dSX7gP9Tuf/b7FyQBCxz2URbzg0 ASM1184e], they can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit. |
'''Our tentative conclusions are as follows:''' | '''Our tentative conclusions are as follows:''' | ||
Line 16: | Line 16: | ||
| <mark>[[X1001]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">Yes</span> | | <mark>[[X1001]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">Yes</span> | ||
|- | |- | ||
− | | <mark>[[X1002]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280|| [[P580]] /<br> [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-|| | + | | <mark>[[X1002]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280|| [[P580]] /<br> [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||NO |
|- | |- | ||
| <mark>[[X1003]]</mark> || Raspberry Pi 5 ||Top || 2230/2242|| [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] <span class="tb_red">Only</span>||Yes||-||Not tested | | <mark>[[X1003]]</mark> || Raspberry Pi 5 ||Top || 2230/2242|| [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] <span class="tb_red">Only</span>||Yes||-||Not tested | ||
Line 27: | Line 27: | ||
|- | |- | ||
| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes (eeprom 2024/05/17 and later version)||NO||NO | | <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes (eeprom 2024/05/17 and later version)||NO||NO | ||
+ | |- | ||
+ | | <mark>[[X1012]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||[[P579]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested | ||
|- | |- | ||
| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">Yes</span> | | [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">Yes</span> |
Latest revision as of 10:36, 24 July 2024
Geekworm PCIe to NVME Sets:
After the release of the Raspberry Pi AI Kit, we tested four PIPs: X1001, X1004, X1011, and M901. X1001, X1004, and M901 all support the hailo-8 ai accelerator, but X1011 does not.
It should be noted that X1004 uses ASMedia ASM1182e PCIe switch, and X1011 uses ASM1184e, they can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.
Our tentative conclusions are as follows:
- If you need to use hailo-8 ai accelerator with high performance, it is recommended to use X1015/X1002/X1003/M901/ the official M.2 HAT+ etc. When choosing these PIP boards, you should focus on whether there is a conflict between the camera cable and the PIP board installation, and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
- If you don't care about the high performance brought by PCIe 3.0, then you can consider using X1004, so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
Model | Compatible with | Position | NVMe M2 SSD Length Support | Matching Case | Matching Cooler | Support NVMe Boot | Support PCIe 3.0 | Support Hailo-8 AI Accelerator |
---|---|---|---|---|---|---|---|---|
X1000 | Raspberry Pi 5 | Top | 2230/2242 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Not tested |
X1001 | Raspberry Pi 5 | Top | 2230/2242/2260/2280 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Yes |
X1002 | Raspberry Pi 5 | Bottom | 2230/2242/2260/2280 | P580 / P580-V2 |
Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | NO |
X1003 | Raspberry Pi 5 | Top | 2230/2242 | P579 / P425 | Official Cooler / H501 Only | Yes | - | Not tested |
X1004 | Raspberry Pi 5 | Top | Dual ssd: 2280 | P579-V2 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes (Requires EEPROM 2024/05/17 and later version) | NO | Yes |
X1015 | Raspberry Pi 5 | Top | 2230/2242/2260/2280 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Yes |
X1005 | Raspberry Pi 5 | Bottom | Dual ssd: 2230/2242/2260/2280 | P580-V2 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes (Requires EEPROM 2024/05/17 and later version) | NO | Yes |
X1011 | Raspberry Pi 5 | Bottom | 4 ssds: 2230/2242/2260/2280 | X1011-C1 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes (eeprom 2024/05/17 and later version) | NO | NO |
X1012 | Raspberry Pi 5 | Top | 2230/2242/2260/2280 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Not tested |
M901 | Raspberry Pi 5 | Top | 2230/2242/2260/2280 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Yes |
Q100 | Raspberry Pi 5 | Top | 2242 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Not tested |
Q200 | Raspberry Pi 5 | Top | Dual ssd: 2280 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | NO | - | Not tested |
M300 | Raspberry Pi 5 | Top | 2230/2242 | P579 | Official Cooler / Argon THRML Cooler / H505/H501 | Yes | - | Not tested |
M400 | Raspberry Pi 5 | Top | 2230/2242/2280 | P579 | Official Cooler/ Argon THRML Cooler / H505/H501 | Yes | - | Not tested |