Difference between revisions of "X5500"
Jump to navigation
Jump to search
Tag: Undo |
|||
Line 33: | Line 33: | ||
* Pop-noise can be improved by enabling GPIO control | * Pop-noise can be improved by enabling GPIO control | ||
* AMP can be enabled / disabled with jumper link | * AMP can be enabled / disabled with jumper link | ||
− | * Compatible with [[X710]] for intelligent power mgmt and cooling your amplifier <ref>Additional M2.5* | + | * Compatible with [[X710]] for intelligent power mgmt and cooling your amplifier <ref>Additional M2.5*21 M/F spacers & 2-pin XH2.54 cable required (not supplied)</ref> |
* Compatible with [[X857]]/[[X856]]/[[X855]] for mSATA SSD storage board, compatible with [[X872]] for M.2 NVME SSD board, compatible with [[X862]] for M.2 SATA SSD board <ref>Additional M2.5*8 M/F spacers required (not supplied)</ref> | * Compatible with [[X857]]/[[X856]]/[[X855]] for mSATA SSD storage board, compatible with [[X872]] for M.2 NVME SSD board, compatible with [[X862]] for M.2 SATA SSD board <ref>Additional M2.5*8 M/F spacers required (not supplied)</ref> | ||
|- | |- |
Revision as of 18:34, 21 April 2020
Contents
Features
FOR USE WITH | Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B |
OS |
|
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C or Micro USB socket at the same time |
Packing List
- X5500 Expansion Board x 1
- Screw M2.5 *6mm x 8
- Spacer F/F M2.5 *20mm x 4
Enable comment auto-refresher