Recent changes
Track the most recent changes to the wiki on this page.
List of abbreviations:
- N
- This edit created a new page (also see list of new pages)
- m
- This is a minor edit
- b
- This edit was performed by a bot
- (±123)
- The page size changed by this number of bytes
16 July 2024
|
|
10:02 | (Comments log)[24.170.98.57 (2×)] | |||
|
|
10:02 24.170.98.57 talk posted a new comment on X1001 (using latest firmware) | ||||
|
|
09:57 24.170.98.57 talk posted a new comment on X1001 (Using x1011 with samsung evo 990 2tb LSPCI no indication of phison controller; system works fine until accessing(reading) large file or running dd if=./TestingFile of=/dev/zero bs=100M count=10 oflag=dsync a couple of times... pciegen 3 is disabled by raspi-boot and on /firmware/boot.txt only have dtparam=pciex1 So far every reduced disk access works fine but again streaming a large file or performing dd will eventually freeze machine, please explaing what i should be looking for in lo...) | ||||
13 July 2024
|
|
21:04 | (Comments log)[223.25.71.8; 185.21.248.71; 175.116.49.141] | |||
|
|
21:04 223.25.71.8 talk posted a new comment on NASPi 3.5 (My 2 blue LEDs are flashing, may I know what does it mean?) | ||||
|
|
20:47 185.21.248.71 talk posted a new comment on X1202 (hi, how can I close all applications and turn off the Raspberry pi after 5 minutes after the external power supply has been turned off?? I don't want to drain the batteries to make it shut down) | ||||
|
|
14:57 175.116.49.141 talk posted a new comment on X-UPS1 (Is it possible for one of the boards in a stacked configuration to output 5V while the other board outputs 12V, or for a single board to output both 5V and 12V simultaneously?) | ||||
11 July 2024
| 13:49 | Comments log 49.49.230.163 talk posted a new comment on X1200 (I'm planning on making my own case and want to align the ports of the pi, X1200 and HAT of my choice with my design. To do this I would like to know the thickness of the X1200 PCB and the thickness of the spacers that seem to be permanently attached to the board.) | ||||
8 July 2024
| 17:50 | Comments log 88.217.180.33 talk posted a new comment on X735 (@Lisa Thank you for the quick reply. I know that you can power other devices with -5V by connectig them to the plug. But this was not my question. I wanted to know if a powered off Raspberry Pi will unintentionally get powered by a connected device with some voltage on the connctor pin (e.g. if the device itself is connected to a USB-Port and therefore has +5V on the pin).) | ||||
7 July 2024
|
|
19:34 | (Comments log)[194.31.237.168; 124.122.125.98] | |||
|
|
19:34 194.31.237.168 talk posted a new comment on X1200 (Good afternoon, where can I get the 3D model files to build the case? I need a Geekworm X1200 model file in SLDASM or STEP format.) | ||||
|
|
12:45 124.122.125.98 talk posted a new comment on X1202 (You say to not use batteries with built in protection circuit, but I want to use LiFePo4 cells. Can I use these well known cells? For safety I only use this type. What is the problem?) | ||||
6 July 2024
| 16:01 | Comments log 83.63.131.222 talk posted a new comment on KVM-A3 (I purchased this model, and it seems that running the version 3 iso fails with "failed to mount LABEL=PIROOT" but running version 4 boots to the correct pikvm? I've tried multiple different SD cards and all prove the same. Was there an update to allow using of the other iso?) | ||||
5 July 2024
|
|
18:50 | (Comments log)[88.217.180.159; 103.61.127.161] | |||
|
|
18:50 103.61.127.161 talk posted a new comment on X306 (Hi I just bought x306 v1.3. What is the small square thing packed with screws?) Tags: Mobile web edit, Mobile edit | ||||
|
|
18:32 88.217.180.159 talk posted a new comment on X735 (Are the +5V outputs of the X735 V3.0 directly connected to the Raspberry Pi +5V system power or ist there a protective circuit that prevents the Raspberry Pi from accidential voltage provided by devices connected to the +5V output while the X735/Raspberry Pi is powered off?) | ||||