Difference between revisions of "X883"
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. | This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. | ||
− | + | x883 will replace [[X829]] | |
Note: | Note: | ||
* Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included | * Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included | ||
− | * Due to installation restrictions, please pay attention to the thickness of | + | * Due to installation restrictions, please pay attention to the thickness of 2.5" SSD/HDD |
− | * As with all SSDs, new | + | * As with all SSDs, new SSD/HDD must be formatted before use |
* Older SSD drives with less efficient flash media may not perform as well as newer drives | * Older SSD drives with less efficient flash media may not perform as well as newer drives | ||
Line 21: | Line 21: | ||
==Features== | ==Features== | ||
* Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, support USAP NOT trim | * Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, support USAP NOT trim | ||
− | * Supports dual 2.5 SATA HDDs/SSDs working at the same time | + | * Supports dual 2.5 SATA HDDs/SSDs working at the same time. |
− | * | + | * The newly designed USB connector can transmit more reliably. |
− | |||
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers | * Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers | ||
* Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac | * Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac | ||
− | |||
* Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi | * Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi | ||
* Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) | * Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) | ||
− | * Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V | + | * Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 6A, smart power mgmt) |
==Power Supply Requirement== | ==Power Supply Requirement== | ||
+ | Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current. | ||
* Power supply: '''5Vdc''' +/-5% , ≥4A | * Power supply: '''5Vdc''' +/-5% , ≥4A | ||
− | * Ports & Connectors: DC jack - 5.5x2. | + | * Ports & Connectors: DC jack - 5.5x2.1mm |
+ | * (Note: DC5525 Jack is compatible with DC5521, so you can also use the PSU with DC5525 Jack) | ||
− | + | Please use '''high quality''' power adapter, or the HDD/SSD may cannot be recognized. | |
[[File:X883-How-to-Power.jpg|600px]] | [[File:X883-How-to-Power.jpg|600px]] | ||
==Packing List== | ==Packing List== | ||
* 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD) | * 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD) | ||
− | * 1 x Carrier Board (To mount raspberry pi on X883) | + | * 1 x Carrier Board X883-A1 (To mount raspberry pi on X883) |
* 1 x USB 3-D Connector | * 1 x USB 3-D Connector | ||
* 1 x 2-Pin Power Connection Wire | * 1 x 2-Pin Power Connection Wire |
Revision as of 21:00, 25 August 2021
Overview
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
x883 will replace X829
Note:
- Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included
- Due to installation restrictions, please pay attention to the thickness of 2.5" SSD/HDD
- As with all SSDs, new SSD/HDD must be formatted before use
- Older SSD drives with less efficient flash media may not perform as well as newer drives
Features
- Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, support USAP NOT trim
- Supports dual 2.5 SATA HDDs/SSDs working at the same time.
- The newly designed USB connector can transmit more reliably.
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
- Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
- Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 6A, smart power mgmt)
Power Supply Requirement
Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current.
- Power supply: 5Vdc +/-5% , ≥4A
- Ports & Connectors: DC jack - 5.5x2.1mm
- (Note: DC5525 Jack is compatible with DC5521, so you can also use the PSU with DC5525 Jack)
Please use high quality power adapter, or the HDD/SSD may cannot be recognized.
Packing List
- 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
- 1 x Carrier Board X883-A1 (To mount raspberry pi on X883)
- 1 x USB 3-D Connector
- 1 x 2-Pin Power Connection Wire
- 6 x Spacer F/F M2.5 x 14mm
- 2 x Spacer M/F M2.5 x 14+5mm
- 12 x Screw M2.5 x5mm
- 4 x Screw M3 x 6mm
Enable comment auto-refresher
Anonymous user #11
Permalink |
Harry
Anonymous user #10
Permalink |
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Lisa
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Lisa
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Lisa
Anonymous user #1
Permalink |
Anonymous user #2
Anonymous user #1
Lisa