X706

Overview

The X706 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X706 can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X706 can also be used with the X820/X825 (2.5" HDD/SSD Shield), X850/X855/X857 (MSATA SSD shield), X862（M.2 NGFF SATA SSD Shield）, X872/X873（NVMe M.2 SATA SSD Shield）.

Features

Smart Uninterruptible Power Supply (UPS) Out 5.1V Max. 8000mA Power Backup for even the most demanding Raspberry Pi set ups Supports 3A via Type-C socket fast charging Can work with single or dual 18650 Lithium Ion battery Integrated battery protection circuit Integrated over current protection and over voltage protection Integrated 10-A fully-integrated synchronous boost converter Intelligent automatic charging and discharging On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% On-board red LED show the status of battery charging or fully charged On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) On-board pin header allows to select AUTO power-on when power supplied or battery installed Ultra-low standby power consumption of μA to maximize battery life On-board blue LED shows the status of power on/off Powers the Raspberry Pi via the 40-pin header Allows power input via Type-C socket or XH2.54 connector On-board XH2.54 power input connectors allows to integrate with your products DON'T supports software safe shutdown.