Difference between revisions of "X706"
Jump to navigation
Jump to search
Line 29: | Line 29: | ||
| KEY FEATURES || | | KEY FEATURES || | ||
*Smart Uninterruptible Power Supply (UPS) | *Smart Uninterruptible Power Supply (UPS) | ||
− | *Out 5.1V | + | *Out 5.1V enough 3000mA Power Backup for even the most demanding Raspberry Pi set ups |
*Supports 3A via Type-C socket fast charging | *Supports 3A via Type-C socket fast charging | ||
*Can work with single or dual 18650 Lithium Ion battery | *Can work with single or dual 18650 Lithium Ion battery | ||
*Integrated battery protection circuit | *Integrated battery protection circuit | ||
*Integrated over current protection and over voltage protection | *Integrated over current protection and over voltage protection | ||
− | |||
*Intelligent automatic charging and discharging | *Intelligent automatic charging and discharging | ||
*On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% | *On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% | ||
Line 40: | Line 39: | ||
*On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) | *On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) | ||
*On-board pin header allows to select AUTO power-on when power supplied or battery installed | *On-board pin header allows to select AUTO power-on when power supplied or battery installed | ||
− | |||
− | |||
*Powers the Raspberry Pi via the 40-pin header - no additional cabling required | *Powers the Raspberry Pi via the 40-pin header - no additional cabling required | ||
*Standard Raspberry Pi extension interface, compatible with other expansion boards | *Standard Raspberry Pi extension interface, compatible with other expansion boards |
Revision as of 17:35, 2 June 2021
Contents
Overview
The X706 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X706 can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X706 can also be used with the X820/X825 (2.5" HDD/SSD Shield), X850/X855/X857 (MSATA SSD shield), X862(M.2 NGFF SATA SSD Shield), X872/X873(NVMe M.2 SATA SSD Shield).
Safety Instructions and Warnings
You must read these safety instructions and warnings before charging your batteries.
- Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
- Do not mix and use old batteries and new batteries, or batteries with different brand names.
- Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
- When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X706 on the wood material or carpet and unattended.
- Must keep the X706 away from children.
- Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
Features
FOR USE WITH |
Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B |
Operating System |
|
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
|
Packing List
1 x X706 V1.1 18650 UPS Shield
1 x Jumper link Pitch 2.54mm
8x M2.5 *5mm Screws
4x M2.5 *20+6mm Spacers
4x M2.5 *20mm Spacers
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa