Difference between revisions of "X706"
| Line 43: | Line 43: | ||
==Packing List== | ==Packing List== | ||
| + | 1 x X706 V1.1 18650 UPS Shield | ||
| + | 1 x Jumper link Pitch 2.54mm | ||
| + | |||
| + | 8x M2.5 *5mm Screws | ||
| + | |||
| + | 4x M2.5 *20+6mm Spacers | ||
| + | |||
| + | 4x M2.5 *20mm Spacers | ||
==User Manual== | ==User Manual== | ||
Revision as of 17:00, 26 May 2021
Contents
Overview
The X706 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X706 can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X706 can also be used with the X820/X825 (2.5" HDD/SSD Shield), X850/X855/X857 (MSATA SSD shield), X862（M.2 NGFF SATA SSD Shield）, X872/X873（NVMe M.2 SATA SSD Shield）.
Features
Smart Uninterruptible Power Supply (UPS)
Out 5.1V Max. 8000mA Power Backup for even the most demanding Raspberry Pi set ups
Supports 3A via Type-C socket fast charging
Can work with single or dual 18650 Lithium Ion battery
Integrated battery protection circuit
Integrated over current protection and over voltage protection
Integrated 10-A fully-integrated synchronous boost converter
Intelligent automatic charging and discharging
On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
On-board red LED show the status of battery charging or fully charged
On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
On-board pin header allows to select AUTO power-on when power supplied or battery installed
Ultra-low standby power consumption of μA to maximize battery life
On-board blue LED shows the status of power on/off
Powers the Raspberry Pi via the 40-pin header
Allows power input via Type-C socket or XH2.54 connector
On-board XH2.54 power input connectors allows to integrate with your products
DON'T supports software safe shutdown.
Packing List
1 x X706 V1.1 18650 UPS Shield
1 x Jumper link Pitch 2.54mm
8x M2.5 *5mm Screws
4x M2.5 *20+6mm Spacers
4x M2.5 *20mm Spacers
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa