Difference between revisions of "X1002"
(→FAQ) |
|||
| Line 66: | Line 66: | ||
==FAQ== | ==FAQ== | ||
| − | < | + | <div class="toccolours mw-collapsible mw-collapsed"> |
| − | < | + | <div style="font-weight:bold;line-height:1.0;"> |
| − | + | Q. X1002 can't boot when install into the P580 case? | |
| − | + | </div> | |
| − | + | <div class="mw-collapsible-content"> | |
| − | + | A: Please check if the FPC cable touch the metal case make shorting when install X1002 into the metal case, you can stick the electrical tape on the case to prevent the ribbon FPC cable from contacting the case to test. | |
| − | </ | + | </div> |
| − | </ | + | </div> |
| − | < | + | <div class="toccolours mw-collapsible mw-collapsed"> |
| − | < | + | <div style="font-weight:bold;line-height:1.0;"> |
| − | + | Q: Which NVMe drives work with a Raspberry Pi 5? | |
| − | + | </div> | |
| − | + | <div class="mw-collapsible-content"> | |
| − | + | A: You can refer to the video: https://youtu.be/3mUgVTBmKio. | |
| − | </ | + | </div> |
| − | </ | + | </div> |
Revision as of 01:20, 17 April 2024
Contents
Overview
The X1002 shield is a bottom NVMe M2 2280 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
This shield follows the new "PIP" design guideline from Raspberry Pi fundation ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!
[Update]
X1002 V1.1 has been released. Compared with V1.0, only pogo pin power supply has been added.
Geekworm PCIe to NVME Sets:
| Model | Compatible with | Position | NVMe M2 SSD Support | Matching Case | Other |
|---|---|---|---|---|---|
| X1000 | Raspberry Pi 5 | Top | 2230/2242 NVMe M2 SSD | P579 | |
| X1001 | Raspberry Pi 5 | Top | 2230/2242/2260/2280 NVMe M2 SSD | P579 | |
| X1002 | Raspberry Pi 5 | Bottom | 2230/2242/2260/2280 NVMe M2 SSD | P580 | |
| X1003 | Raspberry Pi 5 | Top | 2230/2242 NVMe M2 SSD | P579 / P425 / Raspberry Pi 5 Official case | |
| X1004 | Raspberry Pi 5 | Top | Dual 2280 NVMe M2 SSD | P579-V2 | |
| M300 | Raspberry Pi 5 | Top | 2230/2242 NVMe M2 SSD | P579 | |
| M400 | Raspberry Pi 5 | Top | 2230/2242/2280 NVMe M2 SSD | P579 | |
| Q100 | Raspberry Pi 5 | Top | 2242 NVMe M2 SSD | P579 | With 1.3" 240x240 Color TFT |
Important Notes
NVMe SSD Incompatibility List
We recommend avoiding the following NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility:
- WD Blue SN550 series (Solved! Refer to New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.)
- WD Green SN580 series
- WD Green SN350 series
- WD Black SN850 series
- WD Black SN770
- Inland tn446 nvme drive
- Corsair MP600 SSD
- Other NVMe SSD drivers equipped with the same Phison controller
These specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for the X10xx series NVMe shield. You can run "lspci" command to check the controller brand of the SSD.
We hope the Raspberry Pi Foundation will resolve this issue soon.
Also note:
- Compatible with M.2 NVMe SSDs only, Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
- Older NVMe drives with less efficient flash media may not perform as well as newer drives
- New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
- We get feedback from customers that Polaris Controller will also have compatibility problems. Please replace the other SSD test if it not work, whether it is compatible with the Raspberry Pi 5 does not depend on the X100X series boards
PS: There is also feedback from buyers that even NVME SSDs with Phison controller are supported after updating the latest firmware. Please refer to go to: X1001#comment-4638
Features
- Full compatible with other HAT shield;
- Customized FPC cable for easy use of TF card
- Supports installation of official active coolers also;
- With ACT LED Indicator; On: Power OK/Standby,Flashing: Reading/Writing
- Supports 2230/2242/2260/2280 NVMe M2 SSD.
- Can power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
PS:
- The X1002 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.
- Do not reserve the nut column to fix the 2230/2242/2260 SSD, users need to find proper way to fix them.
How to Power
Can power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
Test Reviews
Reter to X1001#Test Reviews
Packing List
- 1 x X1002 NVMe SSD Shield bottom
- 1 x PCIe FPC Cable
- 4 x M2.5x5mm F/F Spacers
- 4 x M2.5x10mm Screws
- 1 x M2x4mm Screws (to fix NVMe M2 SSD)
User Manual
- X1002 hardware description: X1002 Hardware
- X1002 software tutorials: NVMe SSD boot with the Raspberry Pi 5
- Raspberry pi 5 pcie connector pin out
Video Guide
Installation Video of X1002 will release soon!
X1001/X1001/X1002 Test Video by leepsvideo https://youtu.be/XMA8e4r1AUQ
Which NVMe drives work with a Raspberry Pi 5? https://youtu.be/3mUgVTBmKio
FAQ
Q. X1002 can't boot when install into the P580 case?
A: Please check if the FPC cable touch the metal case make shorting when install X1002 into the metal case, you can stick the electrical tape on the case to prevent the ribbon FPC cable from contacting the case to test.
Q: Which NVMe drives work with a Raspberry Pi 5?
A: You can refer to the video: https://youtu.be/3mUgVTBmKio.
Enable comment auto-refresher
Anonymous user #16
Permalink |
Anonymous user #14
Permalink |
Lisa
Anonymous user #15
Anonymous user #13
Permalink |
Harry
Anonymous user #12
Permalink |
Anonymous user #11
Permalink |
Anonymous user #11
Anonymous user #10
Permalink |
Anonymous user #8
Permalink |
Anonymous user #9
Anonymous user #7
Permalink |
Anonymous user #7
Walker
Anonymous user #6
Permalink |
Anonymous user #7
Anonymous user #7
Anonymous user #12
Anonymous user #6
Permalink |
Walker
Anonymous user #4
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #2
Anonymous user #3
Anonymous user #5
Harry