PiKVM-A4

Overview

PiKVM-A4 is one of the members of PiKVM family, it only supports Raspberry Pi zero 2 W without a matching metal case.

The PiKVM-A4 is composed of follow parts:'

X630 HDMI to CSI-2 Board (for video capture)
X630-A4 HAT Board (for ethernet, RTC, ATX Control power in etc)
X630-A5 Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))
0.96 inch OLED (for display, Resolution: 128×64 pixel)
Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
Important Note: The OLED screen will not work if you use PI ZERO image, because pikvm OS has not fixed this problem. If it is fixed in the future, the screen will work fine.

Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3 / X630-A4 / X630-A8)

For use with raspberry pi zero 2 w, X630-A4 (PiKVM-A4) allows to use C296 aluminum heatsink with your raspberry pi zero 2 w, but user need to prepare 4pcs M2.5*7mm screws yourself.

1 x 0.96 inch OLED: Resolution: 128×64 pixel, with 2 piece of M2*6 screws
1 x Ethernet Cable (Cable length: 100cm)
1 x X630 HDMI to CSI-2 Module
- 1 x FPC Cable(8cm length)
1 x X630-A4 Expansion Board
- 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
- 8 x M2.5x3mm Screw
- 3 x M2.5x4+4mm Spacers
- 1 x M2.5x10+4mm Spacer
- 1 x M2.5x15+4mm Spacer
- 2 x M2.5x15mm F/F Spacers
1 x X630-A5 V1.0 Adapter Board
- 1 x M3.5x6mm Screw
- 4 x ATX Control Cable(2pin Female to Female Dupont Cables) (Cable Length: 47cm / 18.50 inch)