From Geekworm Wiki
Jump to navigation Jump to search

X630-A4 V2.0
X630-A4 V1.1 shield
X630-A4 PiKVM shield
X630-A4 PiKVM assembly drawing
X630-A4 PiKVM assembly drawing
X630-A4 PiKVM with C296 heatsink


PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!

X630-A4 is an accessory for KVM-A4 (Raspberry Pi Zero 2 W based KVM),the complete kit, please refer to PiKVM


  • Designed especially for PiKVM ( Raspberry Pi-based KVM over IP)
  • Pefectly Works with the latest Raspberry Pi Zero 2W
  • Fully compatiblie with PiKVM OS (Raspberry Pi Zero 2 W, V2 platform)
  • Control a server and computer using a web browser
  • HDMI Full HD capture based on the TC358743 chip(from X630)
  • OTG Keyboard & mouse; Mass Storage Drive emulation
  • Hardware Real Time Clock (RTC) with CR1220 coin battery socket
  • Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes
  • ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
  • Reserves the 4-pin header & spacers for I2C OLED display
  • Reserves the PH2.0-2P 5V power connector for fan and other devices
  • Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
  • USB On-the-go (OTG) using USB Type-C

Packing List

X630-A4 V1.1

  • 1 x X630-A4 V1.1 HAT Shield
  • 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
  • 8 x M2.5x3mm Screw
  • 3 x M2.5x4+4mm Spacers
  • 1 x M2.5x10+4mm Spacer
  • 1 x M2.5x15+4mm Spacer
  • 2 x M2.5x15mm F/F Spacers

X630-A4 V2.0

  • 1 x X630-A4 V2.0 Expansion Board
  • 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
  • 2 x M2.5x4+4mm Spacers
  • 2 x M2.5x17mm F/F Spacers
  • 1 x M2.5x9mm F/F Spacer
  • 1 x M2.5x15mm F/F Spacer
  • 8 x M2.5x4mm Screws

User Manual

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.