X710 Power Management Board X710 Power Management Board X710 Power Management Board X710 Overview The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Note: X710 does not support Raspberry Pi 5.
Features
FOR USE WITH
Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
OPERATING SYSTEM
- Raspbian Stretch
- Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
KEY FEATURES
- Ideal power management solution for Raspberry Pi
- Integrated high-efficiency step-down DC-DC converter
- Wide 6V to 36V operating input range
- 5A continuous output current
- High efficiency up to 90%
- On-board DC jack and XH2.54 connector for power input
- Power output via XH2.54 connector and the 40-pin header - Intelligent and safe power management
- Equipped with momentary button switch for easy power control
- Press the button to turn on
- Press the button and hold for 1~2seconds to reboot
- Press the button and hold for 3~7seconds to implement safe shutdown
- Press the button and hold for >8seconds to force shutdown
- Supports safe shutdown and full poweroff through software
- Integrated high-performance MOSFET power switch allows continuous drain current up to 17A
- On-board LED shows the status of power on, reboot and shutdown
- On-board PH2.0 connectors allows to use external latching switch or momentary button
- Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- 30mm x 30mm low noise fan for processor cooling
Reserved camera slot and display cutout - Both can still be used with X710 attached
- Reserved 40-pin stackable Header for Add-On Boards
- Works with all current models of the Raspberry Pi using a 40 pin header
- Fully compatible with X820 ,X850 , X860 , X870 , X822 , X852 , X825 , X828 , X855 , X856 , X857 , but there is no match metal case for them
SPECIFICATION
- Power supply: 6~36Vdc ≥ 2A
- Output: 5V 5%, Max 5A
- DC power jack : 5.5*2.5mm, Positive Tip
- Board size: 65 x 57mm
NOTES
- Full poweroff through software is not supported when using external latching power switch
- Don't connect any 5V-powered device to XH2.54 power input connector.
- Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket
Packing List X710 Power mgt Board x 1
Screw M2.5 *5mm x 8
Spacer M/F M2.5 *12mm x 4
Spacer F/F M2.5 *12mm x 4
Jumper x 2 Document For the script, please refer to Software Guide
Please refer to here about the PH2.0 connector details: File:PH2.0 connector specifications.pdf
Installation Guide
FAQ <comments />
