Open main menu

Geekworm HDMI to CSI Module Series:

Convert HDMI signal acquisition into CSI signal and I2S audio signal. The maximum capture resolution depends on the HDMI to CSI converter board as well as the Raspberry Pi hardware.


Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.

  • Raspberry Pi versions that support up to 1080P60Hz: CM3, CM4, Pi 5B
  • Raspberry Pi versions that support up to 1080P50Hz: zero, zero2, Pi3B, Pi4B, etc.
Picture Model Description Max Input Resolution I2S Audio HDMI Capture Chip PCB Dimension CSI-2 Connector Supported SOC
C779-Packing-List.jpg C779 HDMI to CSI-2 1080p50fps NO Toshiba TC358743XBG 35 x 50 mm 15-PIN FPC (pitch 1.0 mm) Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W
C790-Packing-List.jpg C790 HDMI to CSI-2 1080p60fps Yes Toshiba TC358743XBG 30 x 45 mm
  • 15-PIN FPC (pitch 1.0 mm) on the front of C790;
  • 22-PIN FPC (pitch 0.5 mm) on the rear of C790
Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4
X630-Packing-List.jpg X630 HDMI to CSI-2 1080p50fps Yes, but I2S wiring or the X1300-A2 accessory board is necessary Toshiba TC358743XBG 30 x 42.4 mm 15-PIN FPC (pitch 1.0 mm) 4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W
X1300-V1.0-IMG-7645-Packing List.jpg X1300 HDMI RX to MIPI CSI-2-TX 1080p60fps Yes, but I2S wiring or the X1300-A2 accessory board is necessary Toshiba TC358743XBG 30 x 37.5 mm 22-PIN FPC (pitch 0.5 mm) Pi 5B / CM4 IO
X1301-V1.1-IMG-8060-Packing-List.jpg X1301 HDMI RX to MIPI CSI-2-TX HDMI loop output 1080p60fps Yes Toshiba TC358743XBG 57 x 85.5 mm 22-PIN FPC (pitch 0.5 mm) Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO
X1300-A2-IMG-8370-acce-1.jpg X1300-A2 I2S audio accessory board for X630 / X1300 1080p60fps This is a I2S audio accessory board - 57 x 65 mm -
  • work with X1300 HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board
  • work with X630 HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B