N506

N506 Case for Orange Pi 5/5B

N506 Dimensions

N506 Case for Orange Pi 5/5B

Overview

After the release of N505, we received some feedback from customers: the most important point is that N505 does not support fixed 2280 SSD, so we released N506 in time. In N506, we responded to and solved some problems raised by customers, such as we add position hole for the Recovery KEY & MaskROM key button to facilitate use these two function key, and we also enlarged the case to accommodate the entire NVME 2280 ssd, and the SSD can be fixed on the casing. In addition, we also added an aluminum radiator for orange pi 5B shield.

This is a metal case specially designed for Orange Pi 5 which can support installation of M.2 NVMe SSD 2280 length inside the metal case, we call it N506. It reserves all the interfaces of the Orange Pi 5 motherboard, supports the 4010 5v cooling fan, supports the extraction of the GPIO cable. The N506 metal case is also support Orange Pi 5B.

Model	Material	Compatible with	NVMe SSD Support
N515	Iron	Orange Pi 5 Pro / Orange Pi 5 Max	Yes, support to mount 2280 length SSD inside the case for Orange Pi 5 Pro
N510	Iron	Orange Pi 3B v1.1 only, NOT Orange Pi 3B v2.1	Yes.
N508	Iron	Orange Pi 5 Plus	Yes.
N507	Aluminum Alloy	Orange Pi 5/5B	Yes, BUT NOT support to fix 2280 SSD to Case.
N506	Iron	Orange Pi 5/5B	Yes, support to mount 2280 length SSD inside the case for Orange Pi 5.
N505	Iron	Orange Pi 5/5B	Yes, BUT NOT support to fix 2280 SSD to Case.
N502	Iron	Orange Pi Zero 3	No.
N500	Iron	Orange Pi Zero 2	No.

Features

Compatible with Orange Pi 5/5B
Model: N506
High quality metal material with surface galvanized process;
Support for ipex antenna installation
Support installation of M.2 NVMe SSD 2280 length inside the metal case
All ports and slots of the case can match with Orange Pi 5/5B board perfectly
Good heat dissipation, can use 4010 5V active cooling fan and 4pcs passive aluminum heatsink at the same time.
Reserved GPIO cable hole
Equipped with 5V 4010 cooling fan for active cooling
With 5pcs aluminum heatsink for passive cooling
Case Dimensions:108x104.8x35.8mm/4.25x4.13x1.41inch
With mounting hole (75mm distance), you can hang it on the wall or somewhere you want.