C779

HDMI to CSI-2 size

HDMI to CSI-2 pin description

HDMI to CSI-2

Contents

Overview

• This is a raspberry pi HDMI to CSI-2 Module with Toshiba TC358743XBG chip, HDMI input supports up to 1080p25fps.
• According to the customer feedback, this module does not support OctoPi.
• The model of module is C779.
• This product is support also raspberry pi Bullseye OS, since raspistill, raspivid series tools are removed by BULLSEYS, you need to use gstreamer tool to replace raspistill, raspivid etc.

---

Geekworm HDMI to CSI Module Series:

Convert HDMI signal acquisition into CSI signal and I2S audio signal. The maximum capture resolution depends on the HDMI to CSI converter board as well as the Raspberry Pi hardware.

Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.

• Raspberry Pi versions that support up to 1080P60Hz: CM3, CM4, Pi 5B
• Raspberry Pi versions that support up to 1080P50Hz: zero, zero2, Pi3B, Pi4B, etc.

Picture	Model	Description	Max Input Resolution	I2S Audio	HDMI Capture Chip	PCB Dimension	CSI-2 Connector	Supported SOC
	C779	HDMI to CSI-2	1080p50fps	NO	Toshiba TC358743XBG	35 x 50 mm	15-PIN FPC (pitch 1.0 mm)	Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W
	C790	HDMI to CSI-2	1080p60fps	Yes	Toshiba TC358743XBG	30 x 45 mm	15-PIN FPC (pitch 1.0 mm) on the front of C790; 22-PIN FPC (pitch 0.5 mm) on the rear of C790	Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4
	X630	HDMI to CSI-2	1080p50fps	Yes, but I2S wiring or the X1300-A2 accessory board is necessary	Toshiba TC358743XBG	30 x 42.4 mm	15-PIN FPC (pitch 1.0 mm)	4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W
	X1300	HDMI RX to MIPI CSI-2-TX	1080p60fps	Yes, but I2S wiring or the X1300-A2 accessory board is necessary	Toshiba TC358743XBG	30 x 37.5 mm	22-PIN FPC (pitch 0.5 mm)	Pi 5B / CM4 IO
	X1301	HDMI RX to MIPI CSI-2-TX HDMI loop output	1080p60fps	Yes	Toshiba TC358743XBG	57 x 85.5 mm	22-PIN FPC (pitch 0.5 mm)	Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO
	X1300-A2	I2S audio accessory board for X630 / X1300	1080p60fps	This is a I2S audio accessory board	-	57 x 65 mm	-	work with X1300 HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board work with X630 HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B

Features

• Model: C779
• Usage: Same as standard Raspberry Pi camera
• Compatible with: Raspberry Pi 5B/4B/3B+/3B/2B/B+/3A+/Pi Zero/Zero W
• Input signal: HDMI;
• Output signal: CSI;
• 2 CSI-2 channels & clock
• Limitation: HDMI input supports up to 1080p50fps on raspberry pi (Limited by the number of CSI-2 channels)
• Chip: Toshiba TC358743XBG
• Power supply:3.3V
• Size: 35 x 50 mm
• Weight: 10g

User Manual

• Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.
• In platforms such as Zero, Zero 2, Pi 3B, Pi 4B, etc., there is a reference for testing HDMI to CSI module demo： C779-Software or Raspberry pi official forum post
• Pi 5B platforms HDMI to CSI module test demo reference： CSI Manual on Pi 5
• Chip Information-EN: File:TC358743XBG datasheet en 20171026.pdf
• Chip Information-CN: File:TC358743XBG datasheet zh cn 20151218.pdf
• Question about 1080p 60Hz HDMI to CSI-2 via TC358743, refer to: https://forums.raspberrypi.com/viewtopic.php?t=211802&sid=e6fef431928907e63fc8eb539cd75389.

Packing List

• 1 x Raspberry Pi HDMI-IN Module C779
• 1 x 15cm Length 15pin 1.0mm FPC cable (for Pi 4B / 3B / 3A)
• 1 x 15cm Length 15Pin 1.0mm to 22pin 0.5mm FPC cable (for Pi 5B / Pi Zero / Zero W / Zero 2W)

Video

https://youtu.be/z6Ir254MBBw

https://youtu.be/L5qbZPrpPp0

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #29

5 months ago

Score 0

I have a RPI 5 and I'm trying to configure. It doesn't work for now... I'm trying to connect a HDMI coming out of a Macbook Pro M1 into the module but "v4l2-ctl -d /dev/v4l-subdev2 --query-dv-timings" always return 0 values.

What am I doing wrong here? I need to have a different video input device connected to the module?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #28

7 months ago

Score 0

What is the difference between X630 C779 and C790?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #27

8 months ago

Score 0

Hello, is it possible to turn of the onboard led?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

8 months ago

Score 0

Hi,The LED does not support setting, you can use something to cover it.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #26

15 months ago

Score 0

hello im using this module for gopro7 but i have alot of lag and latency in recorded video and streaming.what should i do?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #25

15 months ago

Score 0

Does it accept low resolutions like 640x240?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

15 months ago

Score 0

Hello, C779 supports 720p50\720p60\1080i50\1080p25

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #24

23 months ago

Score 0

In new version with libcamera-still, that is, with the latest Raspberry Pi OS Bullseye installation, have you done the current test? Is it compatible? Thank you

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

23 months ago

Score 0

Hi，yes it is compatible

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #23

29 months ago

Score 0

We tried to capture from the Blackmagic Pocket Cinema Camera 6K, which supposedly has 1080p output in 10-bit. It only gave us a magenta tinted image. We tested the module with another 8bit input, which looks fine. Any idea how to get a correct image from the Blackmagic cam?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

29 months ago

Score 0

Hello，

This chip TC358743 supports up to 8bit 444

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #22

30 months ago

Score 0

Hello, I'd like to try using this to capture 720p gameplay footage, but not all games run at 60fps, most run 30fps. Would I still be able to capture 720p @30fps with this module?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

30 months ago

Score 0

Hi，

Yes, you can try to test it.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #21

30 months ago

Score 0

Hi,

The datasheet for Toshiba TC358743XBG states that audio can also be passed over MIPI CSI interface. Why doesn't C779 support audio?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #20

35 months ago

Score 0

Hi please specify with image to use or at least the kernel version that works? It seems to be hit and miss.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Harry

35 months ago

Score 0

Thanks.

CSI-2-Software

and it fit to the last Bullseye OS also.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #19

38 months ago

Score 0

I am seeing the error opening the interface. Any clue whether the raspivid command is still applicable with this interface? I am seeing the /dev/video0 and the kernel logs show that "tc358743 10-000f: tc358743 found @ 0x1e (i2c-22-mux (chan_id 1))"

pi@raspberrypi:~ $ raspivid -t 5000 -o video.h264 mmal: Cannot read camera info, keeping the defaults for OV5647 mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM) mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1) mmal: Failed to create camera component mmal: main: Failed to create camera component

mmal: Camera is not detected. Please check carefully the camera module is installed correctly

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

38 months ago

Score 0

Hi，Please try to use the EDID method to test it."Use gstreamer to call camera and audio" ; and please check whether the cable is plugged in properly before.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #19

38 months ago

Score 0

I did the edid load. I have a windows 10 laptop driving the HDMI-in to the module. After the EDID, the laptop sees the 2nd display. But no improvement using the raspivid.

Also tried the gst-launch with error openning audio device, and the foo.mkv is 0 bytes.

pi@raspberrypi:~ $ gst-launch-1.0 v4l2src io-mode=5 ! video/x-raw, format=UYVY, framerate=25/1 ! v4l2h264enc output-io-mode=4 ! video/x-h264,profile=high ! h264parse ! queue ! matroskamux name=mux ! filesink location=foo.mkv alsasrc device=hw:1 ! audio/x-raw,rate=48000,channels=2 ! audioconvert ! avenc_aac bitrate=48000 ! aacparse ! queue ! mux. Setting pipeline to PAUSED ... ERROR: Pipeline doesn't want to pause. ERROR: from element /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: Could not open audio device for recording. Additional debug info: gstalsasrc.c(748): gst_alsasrc_open (): /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: Recording open error on device 'hw:1': No such file or directory Setting pipeline to NULL ... Freeing pipeline ... pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ pi@raspberrypi:~ $ ls -l foo.mkv -rw-r--r-- 1 pi pi 0 Sep 28 17:56 foo.mkv

pi@raspberrypi:~ $

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

38 months ago

Score 0

Because C779 does not support audio, please remove the audio part when you test the EDID method. （The part after mkv should be removed）.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #16

38 months ago

Score 0

In the features you state "HDMI Input: 720p50\720p60\1080i50\1080p25"

I am trying to make the board work with a raspberry pi with a 1080i50 (interlaced) input. raspivid -t 0 shows only a cropped area of the input. I asked the question previously and the reply from Lisa was "Hi，1080p50fps input: need to specify the encoding format； Please refer to the method called with gst" I am not trying to use 1080p50fps (progressive) but 1080i50 (interlaced). I don't understand how the encoding format is relevant when the board does not seem to decode interlace video.

Thanks for the help.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

38 months ago

Score 0

Hi，sorry，our code does not support interlaced input.we haven't tested it yet.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #18

39 months ago

Score 0

Hi :-)! I have Rpi4 with 4GB RAM. module is OK working for my purpose. next step I need to read the aux metadata from my camera... I would like to read the HDMI trigger function (REC/STBY) of the camera... It is supposed to be some flag with video signal. Do you know something about this??

Thanks!

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

39 months ago

Score 0

Hi,Sorry, we don’t have more information about it, or you can ask on the official Raspberry Pi forum.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #17

39 months ago

Score 0

Hi

What is the recommended way to mount the card to a raspberry pi 3B, in my case. Does it need a fan, if it gets hot? What is the average working temperature for the card? How high needs it be between the floor inside a case? For example 5 mm or what, 5 mm ontop?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

39 months ago

Score 0

Hi，If you want to DIY a case, please consider its size. But because each user's operating environment and Raspberry Pi load are different, we can't provide more other data.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #16

39 months ago

Score 0

I am unable to make this work with a 1080i50 input. raspivid -t 0 shows a cropped area of the screen. Do you have an example for interlaced input please?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

39 months ago

Score 0

Hi，1080p50fps input: need to specify the encoding format； Please refer to the method called with gst

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #15

40 months ago

Score 0

Hi, I have a GoPro Hero 5 like the one in the demo video. I have the camera interface enable on my Raspberry Pi 4 and video0 is in /dev. And I did all the driver config I tried to run the script in FAQ - A2. It's giving me error saying "camera is not enable. try running 'sudo raspi-config'". Also, my GoPro has the output when I plug it into a monitor, but when I plug it into this module, it's not going into the HDMI output mode. I tried 1080p 24, 1080p 25, 720p 24. None of them work. Please send help

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

40 months ago

Score 0

Hi，can gopro5 force HDMI output? In addition, have you tried the EDID method? Please contact us support@geekworm.com； and please tell us your order NO.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #14

40 months ago

Score 0

Tests with:

Sony NEX5 mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera component mmal: Failed to run camera app. Please check for firmware updates

Sony NEX5N image output success but scrambled. Possible issue with camera only outputting 60hz?

Video capture clips also success, also scrambled.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #12

40 months ago

Score 0

Hello,

I have a VGA output (analogic signal) from an old pc, if I use an adapter VGA to HDMI, this adapter HDMI to CSI will work correctly?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

40 months ago

Score 0

Hello，friend： Sorry we haven't tested like that and cannot guarantee compatibility.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

41 months ago

Score 0

Hello

Which case can you recommend for the PI4 and the raspberry pi HDMI to CSI-2 Module ?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

41 months ago

Score 0

Hello， sorry that there is no matching Case at the moment

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #10

45 months ago

Score 0

What if I use this with 4K resolution? It won't work or just resolution will be downgraded?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

41 months ago

Score 0

Hello，We do not recommend using resolution standards that exceed the requirements.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #9

45 months ago

Score 0

what if you get the green light and the vifeo0 and it still has no picture and all sources of video have been verified?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

46 months ago

Score 0

Should I unplug the cable after connecting

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

41 months ago

Score 0

Hello，Sorry I didn't understand your question well,could please tell us why you unplug the cable? Which cable to unplug?

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

46 months ago

Score 0

I'm trying to use the HDMI card with OctoPi and a GoPro Hero3 but getting this error:

pi@octopi:~ $ raspivid -p -f The driver for the TC358743 HDMI to CSI2 chip you are using is NOT supported. They were written for a demo purposes only, and are in the firmware on an as-is basis and therefore requests for support or changes will not be acted on.

mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera component

mmal: Failed to run camera app. Please check for firmware updates

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #8

46 months ago

Score 0

It says above the OctoPi is not supported.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

46 months ago

Score 0

Can you send the raspberry pi output to the camera? I tried this and am getting errors even though video 0 is showing up. I am using a raspberry pi 4 with two hdmi outputs so I am sending one back into the camera. I know this sounds wierd but I have a reason to do this. I was just wondering if anyone else has tried it and got it to work.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #13

40 months ago

Score 0

Dear Anonymous #6 - I tried something similar, connecting the HDMI output from a Pi 2 to the HDMI2CSI board. It didn't work. It appears that the Pi 2 insisted on 60fcs. I don't know if the Pi 4 is smarter, or if there's a way to tell it to use 25fcs for that output.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #13

40 months ago

Score 0

Sorry, that should have been anonymous #5.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

47 months ago

Score 0

RPI 8g new install

camera enabled

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

47 months ago

Score 0

All setup according to above instructions. run above python code

from picamera import PiCamera from time import sleep camera = PiCamera() camera.start_preview() sleep(1000) camera.stop_preview()

Python 3.7.3 (/usr/bin/python3) >>> %Run TestHDMIinput.py mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM) mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/picamera/camera.py", line 456, in _init_camera self._camera = mo.MMALCamera() File "/usr/lib/python3/dist-packages/picamera/mmalobj.py", line 2279, in __init__ super(MMALCamera, self).__init__() File "/usr/lib/python3/dist-packages/picamera/mmalobj.py", line 633, in __init__ prefix="Failed to create MMAL component %s" % self.component_type) File "/usr/lib/python3/dist-packages/picamera/exc.py", line 184, in mmal_check raise PiCameraMMALError(status, prefix) picamera.exc.PiCameraMMALError: Failed to create MMAL component b'vc.ril.camera': Out of memory

During handling of the above exception, another exception occurred:

Traceback (most recent call last): File "/home/pi/Downloads/TestHDMIinput.py", line 3, in <module> camera = PiCamera() File "/usr/lib/python3/dist-packages/picamera/camera.py", line 431, in __init__ self._init_camera(camera_num, stereo_mode, stereo_decimate) File "/usr/lib/python3/dist-packages/picamera/camera.py", line 460, in _init_camera "Camera is not enabled. Try running 'sudo raspi-config' " picamera.exc.PiCameraError: Camera is not enabled. Try running 'sudo raspi-config' and ensure that the camera has been enabled.

>>>

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

47 months ago

Score 0

Does this component send EDID to the connected device to negotiate comparable resolutions?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

48 months ago

Score 0

Does this support audio passthrough?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Xiali

48 months ago

Score 0

Hi dear ,Yes ,it supports audio passthrough,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geek...munity/forum

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

52 months ago

Score 0

Hello, What model of Raspi can use this HDMI to CS2 module?

Can I use Raspi 3 model B or must be Raspi 4 ?? Tks

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

51 months ago

Score 0

Hello sir,

Both Raspberry Pi 3 or Raspberry Pi 4 are OK to use with this HDMI to CS2 .

Permalink