FOR USE WITH |
Raspberry Pi 4 Model B
|
Operating System |
All Raspberry Pi operating systems
|
KEY FEATURES |
- Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, supports UASP NOT trim
- Supports dual 2.5 SATA HDDs/SSDs working at the same time
- Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
- Function to power the RPI via XH2.54 only needing a single power supply
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
- Integrated USB 3.1 Gen 1 Hub Controller
- USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
- Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
- Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
- Specially-made X882-A1 connector to connect with Raspberry Pi - power Pi4 without additional cables
- Ultra-compact design allows for ease of use two HDD/SSD with Raspberry Pi 4
- LED blue indicator(HDD1,HDD2) indicates each drive status
- Support auto power on function
- Support connecting 3pin PWM Fan
- On board switch with LED light:
- Press button switch to turn on
- Press button switch and hold for 1~2 seconds to reboot
- Press button switch and hold for 3 seconds to implement safe shutdown
- Press button switch and hold for more than 8 seconds to force shutdown
|
SPECIFICATION |
- Power supply: 5.1Vdc +/-5% , ≥4A
- Ports & Connectors:
- DC jack - 5.5x2.1mm (DC5525 Jack is compatible with DC5521, you can also use the PSU with DC5525 Jack)
- Type-C port(Geekworm Type-C 5V 4A 20W power supply is recommended.)
- USB socket - USB 3.0 type A
- Power connector - 5V Out XH2.54 2-pin
- PWM Fan port 3-pin
- SATA socket - 7+15P Female
|
Power Supply Requirement |
- Please use high quality power adapter, or the HDD/SSD may cannot be recognized.
- Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current.
|
NOTES |
- *Due to installation restrictions, please pay attention to the thickness of 2.5" SSD/HDD.
- We do not recommend using Samsung hard drives,Please use hard drives of other brands.
- As with all SSDs, new SSD/HDD must be formatted before use.
- Older SSD drives with less efficient flash media may not perform as well as newer drives.
- A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition
- Additional USB3.0 A Male to A Male cable is required (not supplied)
- Do not power your Raspberry Pi via the Pi's 40-pin header and Type-C USB socket at the same time.
|
Enable comment auto-refresher
Anonymous user #10
Permalink |
Harry
Anonymous user #9
Permalink |
Anonymous user #11
Anonymous user #7
Permalink |
Walker
Anonymous user #6
Permalink |
Anonymous user #6
Walker
Anonymous user #8
Walker
Anonymous user #8
Walker
Anonymous user #8
Walker
Anonymous user #6
Anonymous user #5
Permalink |
Walker
Anonymous user #4
Permalink |
Walker
Anonymous user #3
Permalink |
Walker
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Abby
Anonymous user #1
Permalink |
Lisa