PiKVM

From Geekworm Wiki

Jump to navigation Jump to search

PiKVM-A8

PiKVM-A3

PiKVM-A4

Overview

PiKVM^[1] (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

About after-sales service:

The after-sales service of all products sold by Geekworm should be the responsibility of our Geekworm team (email: support@geekworm.com), please do not disturb the official PiKVM after-sales team.

Geekworm KVM family products:

Model	Compatible With	Form Factor	Max Input Resolution	ATX Control	RTC Chipset	OLED display	PoE	RS232 Console	Ethernet	M.2 NVMe Socket	Control of PCs	USB HUB	I2S audio
KVM-A3 V1.6	Raspberry Pi 4	HAT	1920x1080 @50Hz	Yes	DS1307	0.96"	No	No	1GbE	No	1	No	Yes In-phase I2S wire
KVM-A8 V1.8	Raspberry Pi 4	PCI	1920x1080 @50Hz	Yes	PCF8563	0.96" (Equipped with a 2P wire to connect the OLED)	802.3af	No	1GbE	No	1	No	Yes Inverted-phase I2S wire
KVM-A4 V2.0	Raspberry Pi 2W	HAT	1920x1080 @50Hz	Yes	DS1307	0.96"	No	No	No	No	1	No	No
X680 V1.5	Raspberry Pi CM4	Box	1920x1080 @60Hz	Yes	PCF8563	0.96"	No	No	1GbE	2280	4	Yes	No
~~X680 V1.3~~ Updated to V1.5 now	Raspberry Pi CM4	Box	1920x1080 @50Hz	Yes	DS1307	0.96"	No	No	1GbE	2280	4	Yes	No
X650 V1.3	Raspberry Pi CM4	PCI	1920x1080 @50Hz	Yes	DS1307	No	No	No	1GbE	No	1	No
X652 V1.0	Raspberry Pi CM4	PCI	1920x1080 @60Hz	Yes	DS1307	No	802.3af (POE injector is required due to compatibility issues)	No	1GbE	2280	1	No	No

Some Resource:

References

↑ PiKVM © belongs to https://pikvm.org

Enable comment auto-refresher

Anonymous user #16

2 months ago

Score 0

Which Model could support HDMI video passthrough ？How to make config in KVM-A3 to support hdmi passthrough？

Permalink | Reply

one month ago

Score 0

Hello，KVM-A3 does not support HDMI video pass-through.

Anonymous user #15

2 months ago

Score 0

Is there a way to stop the OTG (usb connect that is used for mouse and keyboard from the server) from drawing power from the servers USB. It can power the Pi but I dont need that as power is provided from the Pi's USB. It's causing errors as it tried to draw more power than the USB port can supply. Thanks, Jamie

Permalink | Reply

2 months ago

Score 0

Hi，sorry，not support it.

Anonymous user #14

10 months ago

Score 0

Can I stack another HAT on top, like IQaudio DAC. Which pins does the hdmi audio and oled use ?

Permalink | Reply

10 months ago

Score 0

Hi, which product are you talking about? KVM-A4?

Anonymous user #13

15 months ago

Score 0

I want to integrate camera module to pikvm os. Can you help me with the command lines.

Permalink | Reply

15 months ago

Score 0

Hello, could you please provide your order number? Then you can contact us via our email: support@geekworm.com we will do our best to solve your problem

Anonymous user #12

16 months ago

Score 0

I just want to know how to make the PiKVM-A4

LCD display work where are the geekworm scrips to do that

Permalink | Reply

Anonymous user #12

16 months ago

Score 0

the generic pi2w image is missing i2c-dev & turning it on so add them.

cd /etc/modules-load.d/ more kvmd.conf rw nano kvmd.conf dwc2 libcomposite tc358743 i2c-dev

cd /boot nano config.txt dtparam=i2c_arm=on

systemctl enable --now kvmd-oled kvmd-oled-reboot kvmd-oled-shutdown ro reboot

16 months ago

Score 0

you can refer to this

https://wiki...PiKVM-A4#FAQ

Anonymous user #11

17 months ago

Score 0

I just came across your product: you seem to support PiKVM V3 platform only?

Is there support for V4 also?

Permalink | Reply

17 months ago

Score 0

Does not support V4, only supports V3

Anonymous user #10

19 months ago

Score 0

Does it also support upgrading the Firmware using the virtual flash drive?

Permalink | Reply

19 months ago

Score 0

Hello, here we have an official information about PiKVM Handbook, I hope it can help you and solve your doubts: https://docs...table-drives

Anonymous user #9

20 months ago

Score 0

Ich heiße Stefan, und bin ein kek

Permalink | Reply

19 months ago

Score 0

Hello, how can I help you?

Anonymous user #8

26 months ago

Score 0

Can a HAT expander cable be used with this case i.e. is there enough clearance for the connector, and for ribbon cable to get out of lid?

It looks as if there is a slot / cut-out but can't be sure about size and position from photos.

Permalink | Reply

26 months ago

Score 0

Hi， The case does not support extended GPIO cables because there is not enough space for the X630-A3 to the top of the case.

Anonymous user #7

26 months ago

Score 0

Hi, I have a PiKVM-A4 Kit (Pi Zero 2W) and LOVE it

Would it be possible to share a 3D model of the assembled boards so I can more easily design a case for it? Or maybe you already have an STL of a case you could share?

Thanks!

Permalink | Reply

26 months ago

Score 0

Hello，

OK,Please email us ：support@geekworm.com ； Thanks！

Anonymous user #6

27 months ago

Score 0

What gives with the Yellow part of the OLED display?

Thought it was just the demo picture, but also shows up on video and was commented on by purchaser on Aliexpress.

Permalink | Reply

27 months ago

Score 0

Hi，

Yellow part： iface eth0

The display can show the temperature, IP address and other information of the Raspberry Pi

Anonymous user #8

26 months ago

Score 0

With regards to the yellow apsect of the display, my point was this looks like a fault as part of the bottom of the 'iface: eth0' text is in blue. So the question is - is there a fault with the OLED connectivity?

26 months ago

Score 0

Hi,

It is normal, no malfunction, because there are two colors. We will be replacing only one color to solve this problem.

Anonymous user #5

27 months ago

Score 0

Does the X630 HDMI to CSI bridge has HDMI backpower workaround so it can be used with KVM switch?

Permalink | Reply

27 months ago

Score 0

Hi，It does not support reverse power

Anonymous user #4

28 months ago

Score 0

Can I support audio ?

Permalink | Reply

28 months ago

Score 0

1/The X630-A3 has an IS2 Audio In interface, which requires additional wiring to connect.

2/But currently the PIKVM system does not support audio. It depends on the system you are using.

3/The X630-A4 does not support audio.

Anonymous user #3

28 months ago

Score 0

Obviously this is a DIY / opensource version and the latter are enterprise solutions, but how does this compare to IPMI (or for Dell, iDRAC, and HP, ILo or Lights-out)?

Permalink | Reply

28 months ago

Score 0

Hi, pikvm.org to get more function details.

Thanks

Anonymous user #2

28 months ago

Score 0

Is the X630-A3 fan a 3-pin PWM fan that supports changing fan speed?

Permalink | Reply

28 months ago

Score 0

Hi，

It is a 2pin fan and does not support speed adjustment.

Anonymous user #1

28 months ago

Score 0

What is RTC? Why do you need it?

Permalink | Reply

28 months ago

Score 0

Hardware Real Time Clock (RTC) with CR1220 coin battery socket

Retrieved from "https://wiki.geekworm.com/index.php?title=PiKVM&oldid=21201"