X829-C1
Contents
Overview
This is a new Geekworm design metal case with power control switch and super mute big DC 5V 6010 cooling fan for installing Raspberry Pi 4 Model B and X829 dual 2.5" SATA HDD/SSD Shield and X735 power management board.
As the X829 use dual 2.5" SATA HDD, so we open the cooling fan hole at the left side of case, the cooling fan install at the left which can help cooling the HDD. Also you can use with X735 auto cooling and power management board to reach double cooling effect.
Note: The Raspberry Pi 4 board, X829 board, 2.5 SATA HDD, X735 board are all not included in the packing list.
Features
- High quality metal material with surface galvanized process
- Equipped with super mute DC 5V 6010 big cooling fan
- Equipped with power switch with beautiful LED indicator to control the power of X829 and the Raspberry Pi 4; (LED indicator can be disable by pull out the white cable)
- Easy to install, all main connectors are easily access to use;
- Case Size(Installation): 13.7 x 9.5 x 6.7 cm / 5.39 x 3.74 x 2.64inch
- Supports X735 installation for intelligent power management and cooling your Raspberry Pi 4
- with VESA mounting hole, you can hang it on the wall or somewhere you want
Packing List
- 1 x X829-C1 Metal Case
- 1 x Cooling Fan
- 1 x Power Control Switch
- 1 x Screws Pack
- 1 x Screw Driver
User Manual
Installation video for Raspberry Pi 4+X829+X735+X829 Case: https://youtu.be/0oQr77aQ6rk
FAQ
1. Does the X829 case support 15mm 2.5" hard drives?
A: Sorry, no. The X829 HDD2 interface can support Max 12mm 2.5" drives, the HDD1 interface can support Max 11mm 2.5" drives.
Enable comment auto-refresher
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Walker
Walker
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa