Overview
This is the X862 M.2 NGFF SATA SSD Shield for Raspberry Pi 4 model B, it provides a complete storage solution for raspberry pi 4. It supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230.
Important NOTE:
This X862 is not fit to ROCK64 and Raspberry Pi 3B+ /3B because the difference of USB 3 position. Please refer to X860 if you want use M.2 NGFF SATA SSD on the Raspberry Pi 3B+/3B or ROCK64 board.
Features
FOR USE WITH |
Raspberry Pi 4 Model B
|
Operating System |
All Raspberry Pi operating systems
|
KEY FEATURES |
- Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD Shield
- Supports up to 2TB m.2 NGFF SSD solid-state drive
- Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230[1]
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
- Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
- USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
- Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying [2]
- LED blue indicator indicates drive status
- External self-powered or USB bus-powered
- Onboard DC jack & XH2.54 connector for extra SSD power supply
- Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required!
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
- Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
- Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
|
SPECIFICATION |
- 5Vdc +/-5% , Powered via USB port by Raspberry Pi
- 5Vdc via DC power jack or XH2.5 connector, Extra power supply for SSD
- USB socket - USB 3.0 type A x1
- Power input jack 5.5*2.5mm x1
- XH2.54 SSD power input connector x1
- 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x1
|
NOTES |
- ↑ Additional spacer required for SSD lengths 2260, 2242 and 2230 (not supplied with X862)
- ↑ A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition
- NGFF SATA SSD is not included
- Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
- As with all SSDs, new media must be formatted before use
- SSDs use exceptionally high performance storage media that will run hot when under load
- Older SSD drives with less efficient flash media may not perform as well as newer drives
|
How to Power
Packing List
- X862 M.2 NGFF SATA SSD Shield x 1
- USB3.1 jumper x 1
- Screw M2.5 *6mm x 4
- Spacer M/F M2.5 *12mm x 4
- Spacer F/F M2.5 *8mm x 4
- Screw driver x 1
- Screw M2 *4mm x 1
Matching Metal Case
Please refer to X857-C1 Case
Installation video for Raspberry Pi 4+ X862 + X735 + X857-C1 Case: https://youtu.be/TrQwcPBU9S0
User Manual
About USB boot please refer to Does the X825/X855 support USB boot
Customer video for your reference: https://youtu.be/Q1btyPoL0GI
Enable comment auto-refresher
Anonymous user #3
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #3
Anonymous user #1
Permalink |
Cindy
Anonymous user #2