X856

X856

X856

X856

X856

X856

Overview

The X856 mSATA SSD Shield expansion board is updated by X855, it provides a complete storage solution for Raspberry Pi 4 Model B, only mSATA interface SDD hard disk is suitable for X856 mSATA SSD extension board; Support up to 1TB mSATA solid-state drive (SSD); With this module, user can build a mobile hard disk with a mSATA SSD for Raspberry Pi 4 Model B.

Features

For Use With	Raspberry Pi 4 Model B
Operating System	All Raspberry Pi operating systems
Key Features	Supports up to 1TB mSATA solid-state drive (SSD) Ideal storage solution for Raspberry Pi 4 Model B only Allows booting OS from your SSD for faster app opens, web serving and file copying, a microSD card is required for forcing the Raspbian OS to use the SSD for its "root" partition USB 3.1 Gen1（ Support USB 3.0） to SATA 6Gb/s Bridge Controller Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac USB bus-powered, No additional AC adapter required Ultra compact size Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X825 assembly Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)
Power Supply I/O ports	- Power supply: 5Vdc +/-5% , Powered via Pi's USB port 5Vdc via micro-USB socket - Ports & Connectors: USB socket - USB 3.0 type A x1 52P Mini PCI-E mSATA slot x1 - PCB Size 85mm x 56mm
Notes	A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time.

Packing List

• X856 mSATA SSD shield x 1
• USB3.1 jumper x 1
• Screw M2.5 *6mm x 6
• Spacer M/F M2.5 *12mm x 4
• Spacer F/F M2.5 *8mm x 4

Installation Guide

Document

1. Please refer to: How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive
2. How to Initialize, Partition and Format a Brand New SSD in Windows – File:Tutorial Initalize New SSD.pdf

1. Setting the permissions for your HDD /SDD in Raspbian

sudo chown pi:pi /media/pi/<HARD-DRIVE-LABEL> location

-Change the owner to pi and all users should have full r/w/x permissions

sudo chmod 777 /media/pi/<HARD-DRIVE-LABEL> location

-Make your HDD/SSD readable, writable and executable by everyone

FAQ

Q1: Does the X856 support USB boot?

Please refer to Does the X825/X855 support USB boot

Q2: What msata SSD is recommend?

It is not recommend use Samsung brand SSD, and you can choose other brand that you like.

Some Tips

Thanks for Britt Johnston:

I have written new code to support your X735 device and documented how to use X735 and X856 together see: https://github.com/hoopsurfer/pdx for more, the new code is very reliable in my experience. https://storage.jamesachambers.com/ssd/

https://github.com/hoopsurfer/pdx/blob/master/installX856.md

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

48 months ago

Score 0

Why is not recommended Samsung brand mSATA?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

48 months ago

Score 0

Hi friend, Because there is EMC interference between the SSD and USB3, the X856 has been updated to X857 NOW.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

48 months ago

Score 0

Is there any issue with x856 on adding another 2.5 hdd on the lastest available usb3 port ? Seems the added hdd does not have enougth power (but seems to work with x857).

Thanks for reply

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

51 months ago

Score 0

what manufacture and type of usb to sata controller is this device build on?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

55 months ago

Score 0

Why is not recommended Samsung brand mSATA?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

48 months ago

Score 0

Hi friend, Because there is EMC interference between the SSD and USB3, the X856 has been updated to X857 NOW.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

56 months ago

Score 0

Is there a list of compatible mSATA SSD??

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

56 months ago

Score 0

Hi friend,

Please use high quality big brand SSD, but not recommend Samsung。

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

57 months ago

Score 0

Is there a way to decrease the blue led intensity or even turn it off (x856). If not, what can be the possible solution ?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Cindy

57 months ago

Score 0

Helllo friend,

The blue SSD led is used to show the SSD status, the blue led is on indicate that the SSD is running. You can use some opaque tapeto cover it or a back color pen to color it black.(*^_^*)

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

58 months ago

Score 0

Q3: What is the difference between the X855 (older version) and X856 (updated version)?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

57 months ago

Score 0

Hi friend,

No much difference. Just update the USB connector.

Permalink