X710

 ⚠️  Deprecated: This page is outdated and may contain inaccurate information. It is kept for reference only. 

X710 Power Management Board

X710 Power Management Board

X710 Power Management Board

X710

Overview

The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.

Note: X710 does not support Raspberry Pi 5.

Features

FOR USE WITH	Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
OPERATING SYSTEM	- Raspbian Stretch - Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
KEY FEATURES	- Ideal power management solution for Raspberry Pi - Integrated high-efficiency step-down DC-DC converter - Wide 6V to 36V operating input range - 5A continuous output current - High efficiency up to 90% - On-board DC jack and XH2.54 connector for power input - Power output via XH2.54 connector and the 40-pin header - Intelligent and safe power management - Equipped with momentary button switch for easy power control - Press the button to turn on - Press the button and hold for 1~2seconds to reboot - Press the button and hold for 3~7seconds to implement safe shutdown - Press the button and hold for >8seconds to force shutdown - Supports safe shutdown and full poweroff through software - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A - On-board LED shows the status of power on, reboot and shutdown - On-board PH2.0 connectors allows to use external latching switch or momentary button - Powers the Raspberry Pi via the 40-pin header - no additional cabling required - 30mm x 30mm low noise fan for processor cooling Reserved camera slot and display cutout - Both can still be used with X710 attached - Reserved 40-pin stackable Header for Add-On Boards - Works with all current models of the Raspberry Pi using a 40 pin header - Fully compatible with X820,X850, X860, X870, X822, X852, X825, X828, X855, X856, X857, but there is no match metal case for them
SPECIFICATION	- Power supply: 6~36Vdc ≥ 2A - Output: 5V 5%, Max 5A - DC power jack : 5.5*2.5mm, Positive Tip - Board size: 65 x 57mm
NOTES	- Full poweroff through software is not supported when using external latching power switch - Don't connect any 5V-powered device to XH2.54 power input connector. - Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket

Packing List

• X710 Power mgt Board x 1
• Screw M2.5 *5mm x 8
• Spacer M/F M2.5 *12mm x 4
• Spacer F/F M2.5 *12mm x 4
• Jumper x 2

Document

• X710 Dimensions source file (DXF): File:X710-PCB-v1.dxf - You can view it with Autodesk Viewer online

For the script, please refer to Software Guide

Please refer to here about the PH2.0 connector details: File:PH2.0 connector specifications.pdf

Installation Guide

FAQ

<comments />