|
|
| Line 31: |
Line 31: |
|
| |
|
| ==Hardware Parameters== | | ==Hardware Parameters== |
| * Model: C792 | | *'''Model:''' C792 |
| * Compatible with '''Raspberry Pi 5B/4B/3B/Zero/CM5/CM4''' | | *'''Compatible with:''' Raspberry Pi 5B/4B/3B/Zero/CM5/CM4 |
| * HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)
| | *'''HDMI input:''' Raspberry Pi hardware is mainly divided into two series, supporting a maximum of either 1080P@60Hz or 1080P@50Hz |
| * 2 CSI-2 channels & clock '''(Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)''' | | :<span class="tb_red">*Up to 1080P@60Hz:</span> CM3, CM4, Pi 5B |
| * The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module. | | :<span class="tb_red">*Up to 1080P@50Hz:</span> Zero, Zero 2, Pi 3B, Pi 4B, etc. |
| * The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module.
| | *'''Size:''' 56 x 56 mm |
| * Size: 56 x 56 mm | | *'''Power supply:''' 5V |
| * Power supply:5V | | *'''Weight:''' 25g |
| * Weight: 25g | |
| | |
| <font color=red>'''Important note:'''</font>
| |
| * <font color=red>The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.</font>
| |
| * <font color=red>In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.</font>
| |
| * <font color=red> When the‘HDMI Loop Out’is connected to the monitor, the HDMI source detects the monitor connected to the‘HDMI Loop Out’; when the‘HDMI Loop Out’is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When‘HDMI Loop Out’is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.</font>
| |
|
| |
|
| ==Packing List== | | ==Packing List== |