Difference between revisions of "X635"

Latest revision as of 19:39, 17 April 2024

X635 V1.2 Interface Schematic

X635 V1.2 PCB Size

X635 V1.2 Packing List

X635 V1.2

X635 V1.2 + Raspberry Pi CM4

X635 V1.2 + Raspberry Pi CM4 + C235 Heatsink

Note

Don't power via X635 USB-C socket when connect another PC to X635 USB-A.
To enable the CM4 to be updated via rpiboot, You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header.
Please use only the screws(M2x3mm) for mounting the SSD come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!!

Overview

The X635 is a ultra-compact carrier board specifically designed for the Raspberry Pi compute module 4.

It supports M.2 NVMe SSD expansion board which offers an easy and fast way to create storage solution. At the same time, it adds HDMI to CSI-2 bridge that converts HDMI stream to MIPI CSI-2 TX. The CM4 has been designed without video streaming input port except CSI-2 for camera input, and this carrier board can be used with CM4 in several applications that required Video Input.

Features

Based on the Raspberry Pi Compute Module 4 and Compatible with all variants
Takes in HDMI input and converts to CSI-2 that looks like a camcorder input
HDMI Full HD capture based on the TC358743 chip
HDMI input: 1080p30, 1080p25, 720p30, 720p25
Supports HDMI audio capture via i2s
Gigabit Ethernet socket supporting Power over Ethernet (POE) expansion(Need extra PoE module)
HDMI output port supporting 4K display
M.2 2242 KEY M socket for NVMe SSD storage expansion
Supports booting from MicroSD, eMMC and faster M.2 2242 NVME SSD
USB2.0 Type-A connector for external USB hub and programming the CM4 eMMC
26pin expansion header includes power pins and GPIO pins
Small size measuring just 55 x 70 x 18mm