Latest revision as of 14:42, 28 March 2024
X710 Power Management Board
X710 Power Management Board
X710 Power Management Board
Overview
The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Note: X710 does not support Raspberry Pi 5.
Features
| FOR USE WITH |
Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
|
| OPERATING SYSTEM |
- Raspbian Stretch
- Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
|
| KEY FEATURES |
- - Ideal power management solution for Raspberry Pi
- - Integrated high-efficiency step-down DC-DC converter
- - Wide 6V to 36V operating input range
- - 5A continuous output current
- - High efficiency up to 90%
- - On-board DC jack and XH2.54 connector for power input
- - Power output via XH2.54 connector and the 40-pin header
- - Intelligent and safe power management
- - Equipped with momentary button switch for easy power control
- - Press the button to turn on
- - Press the button and hold for 1~2seconds to reboot
- - Press the button and hold for 3~7seconds to implement safe shutdown
- - Press the button and hold for >8seconds to force shutdown
- - Supports safe shutdown and full poweroff through software
- - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A
- - On-board LED shows the status of power on, reboot and shutdown
- - On-board PH2.0 connectors allows to use external latching switch or momentary button
- - Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- - 30mm x 30mm low noise fan for processor cooling
- Reserved camera slot and display cutout - Both can still be used with X710 attached
- - Reserved 40-pin stackable Header for Add-On Boards
- - Works with all current models of the Raspberry Pi using a 40 pin header
- - Fully compatible with X820,X850, X860, X870, X822, X852, X825, X828, X855, X856, X857, but there is no match metal case for them
|
| SPECIFICATION |
- - Power supply: 6~36Vdc ≥ 2A
- - Output: 5V 5%, Max 5A
- - DC power jack : 5.5*2.5mm, Positive Tip
- - Board size: 65 x 57mm
|
| NOTES |
- - Full poweroff through software is not supported when using external latching power switch
- - Don't connect any 5V-powered device to XH2.54 power input connector.
- - Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket
|
Packing List
- X710 Power mgt Board x 1
- Screw M2.5 *5mm x 8
- Spacer M/F M2.5 *12mm x 4
- Spacer F/F M2.5 *12mm x 4
- Jumper x 2
Document
For the script, please refer to Software Guide
Please refer to here about the PH2.0 connector details: File:PH2.0 connector specifications.pdf
Installation Guide
FAQ
Enable comment auto-refresher
Abarrow
Permalink |
Lisa
Anonymous user #6
Permalink |
Anonymous user #5
Permalink |
Anonymous user #4
Permalink |
Xiali
Anonymous user #3
Permalink |
Anonymous user #2
Permalink |
Anonymous user #1
Permalink |
Cindy
Anonymous user #1
Permalink |
Cindy
Abarrow
Permalink |
Mikhail
Permalink |
FireTaz
Permalink |
FireTaz
Permalink |
FireTaz
Permalink |