C792: Difference between revisions

(32 intermediate revisions by 6 users not shown)

Line 2:

[[File:C792-IMG-9541.jpg|thumb|right|C792 front view]]

[[File:C792-IMG-9542.jpg|thumb|right|C792 rear view]]

[[File:C792-IMG-9541-~~Packing_list~~.jpg|thumb|right|C792 ~~Packing List~~]]

[[File:C792-IMG-9541-size.jpg|thumb|right|C792]]

[[File:C792-IMG-9541-interface.jpg|thumb|right|C792]]

[[File:C792-IMG-9541-Application.jpg|thumb|right|C792]]

'''Important Notice'''

*This product is designed for advanced Raspberry Pi users and may not be suitable for beginners.

*The Raspberry Pi 5 lacks hardware-accelerated H.264 encoding, resulting in lower image capture performance than the Pi 4B and high CPU usage at 1080p

*For stable operation, we strongly recommend powering the module separately via the 5V power port.

==Overview==

The C792 is a HDMI to CSI-2 converter module with HDMI loop out ~~that supports~~ I2S audio output.

The C792 is an HDMI-to-MIPI CSI-2 converter module with HDMI loop out and I2S audio output support.

:'''HDMI Input:''' Supports up to 4K@60Hz, and the HDMI loop-out outputs the same content synchronously as the input.

:'''CSI-2 Output:''' Supports up to 1080p@60Hz (4K input is automatically downscaled to 1080p while keeping the refresh rate).

==Working Principle==

The module's hardware architecture consists of the GSV2001 and TC358743: The GSV2001 handles HDMI signal splitting (one channel for loop‑out display, the other to the TC358743 for processing), and the TC358743 performs HDMI‑to‑CSI‑2 conversion.

'''HDMI Loop‑out'''

:*When a monitor is connected: The HDMI source detects the physical display.

:*When '''NO''' monitor is connected: The source detects a virtual display (EDID) emulated by the TC358743.

~~The HDMI input supports~~ up to 4K 60Hz~~, and the HDMI loop out screen is consistent with the HDMI input screen.~~

'''CSI‑2 Interface'''

:*15‑pin: 2 data lanes, for Raspberry Pi Zero / 3B / 4B, up to 1080p@50Hz

:*22‑pin: 4 data lanes, for Raspberry Pi CM4 / CM5 / 5B, up to 1080p@60Hz

CSI~~-2 output support up to 1080p 60Hz (4K screen will be automatically scaled to 1080p, the refresh rate remains unchanged).~~

==Hardware Parameters==

* Model: C792

*'''Model:''' C792

* Compatible with Raspberry Pi 5B/4B/3B/Zero/CM5/CM4

*'''Compatible with:''' Raspberry Pi 5B/4B/3B/Zero/CM5/CM4

* HDMI input: ~~supports up to 1080P60Hz on~~ Raspberry Pi ~~(Only when use with CM4 /CM5/ Pi 5B)~~

*'''HDMI input:''' Raspberry Pi hardware is mainly divided into two series, supporting a maximum of either 1080P@60Hz or 1080P@50Hz

* ~~HDMI~~ to ~~CSI-2 bridge chip~~:~~Toshiba TC358743XBG~~

:*Up to 1080P@60Hz: CM3, CM4, Pi 5B

* 2 CSI-2 channels & clock '''(Pi 4B/~~3B and Pi Zero only support 2 lan~~, ~~max 1080P1080p50Hz~~, ~~and~~ Pi ~~CM4 /CM5/~~ 5B ~~can support 4 lan, max 1080P1080p60Hz)'''~~

:*Up to 1080P@50Hz: Zero, Zero 2, Pi 3B, Pi 4B, etc.

* ~~The CSI-2 interface~~, ~~with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.~~

*'''Size:''' 56 x 56 mm

* The CSI-2 ~~interface~~, ~~with 22 pin FPC seat~~, ~~spacing 0.5 mm~~, ~~is located on the back of the C792 module~~.

*'''Power supply:''' 5V

* Size: 56 x 56 mm

*'''Weight:''' 25g

* Power supply:5V

* ~~Weight: 25g~~

'''~~Important note~~:'''

* The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.

* In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.

* When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.

==Packing List==

Line 37:

Line 48:

[[File:C792-IMG-9541-Packing list.jpg|500px]]

==User Manual==

==User Manual - C792 / C790 / C779 Software Demo==

<!-- 可以参考bli的说明

https://wiki.blicube.com/blikvm/zh/hdmi-csi-i2s/#demo

-->

----

Here are a few tutorials:

* Similar Products Guide: [[X1300 Software]]

* Tutorial from customers: [https://github.com/geekworm-com/RPi5_hdmi_in_card RPi5_hdmi_in_card]

* '''Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.'''

* '''Pi 5B platforms HDMI to CSI module test demo reference： ''' [[CSI Manual on Pi 5]]

* ~~Refer~~ to: https://wiki.blicube.com/blikvm/zh/C792/

* Possible software problems: [https://github.com/raspberrypi/firmware/issues/1915 ISP freezes with new firmware] and [https://github.com/raspberrypi/firmware/issues/1904 Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information]

* Also refer to: https://wiki.blicube.com/blikvm/en/C792/

~~~~

~~~~

[[Category:Product Manual]]

[[Category:Raspberry pi]]

==FAQ==

<!-- ==FAQ==

这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->

<!-- 这是注释

Line 61:

Line 77:

</div>

-->

<~~comments~~ />

<comment-streams id="main" />

@@ Line 2: / Line 2: @@
 [[File:C792-IMG-9541.jpg|thumb|right|C792 front view]]
 [[File:C792-IMG-9542.jpg|thumb|right|C792 rear view]]
-[[File:C792-IMG-9541-Packing_list.jpg|thumb|right|C792 Packing List]]
+[[File:C792-IMG-9541-size.jpg|thumb|right|C792]]
+[[File:C792-IMG-9541-interface.jpg|thumb|right|C792]]
+[[File:C792-IMG-9541-Application.jpg|thumb|right|C792]]
+<span class="tb_red">'''Important Notice'''</span>
+*This product is designed for advanced Raspberry Pi users and may <span class="tb_red">not be suitable for beginners.</span>
+*The Raspberry Pi 5 lacks hardware-accelerated H.264 encoding, resulting in lower image capture performance than the Pi 4B and high CPU usage at 1080p
+*For stable operation, we strongly recommend <span class="tb_red">powering the module separately via the 5V power port.</span>
 ==Overview==
-The C792 is a HDMI to CSI-2 converter module with HDMI loop out that supports I2S audio output.
+The C792 is an HDMI-to-MIPI CSI-2 converter module <font color=red>with HDMI loop out</font> and I2S audio output support.
+:'''HDMI Input:''' Supports up to 4K@60Hz, and the HDMI loop-out outputs the same content synchronously as the input.
+:'''CSI-2 Output:''' Supports up to 1080p@60Hz (4K input is automatically downscaled to 1080p while keeping the refresh rate).
+==Working Principle==
+The module's hardware architecture consists of the GSV2001 and TC358743: The GSV2001 handles HDMI signal splitting (one channel for loop‑out display, the other to the TC358743 for processing), and the TC358743 performs HDMI‑to‑CSI‑2 conversion.
+'''HDMI Loop‑out'''
+:<span class="tb_red">*When a monitor is connected:</span> The HDMI source detects the physical display.
+:<span class="tb_red">*When '''NO''' monitor is connected:</span> The source detects a virtual display (EDID) emulated by the TC358743.
-The HDMI input supports up to 4K 60Hz, and the HDMI loop out screen is consistent with the HDMI input screen.
+'''CSI‑2 Interface'''
+:<span class="tb_red">*15‑pin:</span> 2 data lanes, for Raspberry Pi Zero / 3B / 4B, up to 1080p@50Hz
+:<span class="tb_red">*22‑pin:</span> 4 data lanes, for Raspberry Pi CM4 / CM5 / 5B, up to 1080p@60Hz
-CSI-2 output support up to 1080p 60Hz (4K screen will be automatically scaled to 1080p, the refresh rate remains unchanged).
+{{HDMI to CSI}}
 ==Hardware Parameters==
-* Model: C792
+*'''Model:''' C792
-* Compatible with Raspberry Pi 5B/4B/3B/Zero/CM5/CM4
+*'''Compatible with:''' Raspberry Pi 5B/4B/3B/Zero/CM5/CM4
-* HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)
+*'''HDMI input:''' Raspberry Pi hardware is mainly divided into two series, supporting a maximum of either 1080P@60Hz or 1080P@50Hz
-* HDMI to CSI-2 bridge chip:Toshiba TC358743XBG
+:<span class="tb_red">*Up to 1080P@60Hz:</span> CM3, CM4, Pi 5B
-* 2 CSI-2 channels & clock '''(Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and  Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)'''
+:<span class="tb_red">*Up to 1080P@50Hz:</span> Zero, Zero 2, Pi 3B, Pi 4B, etc.
-* The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.
+*'''Size:''' 56 x 56 mm
-* The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module.
+*'''Power supply:''' 5V
-* Size: 56 x 56 mm
+*'''Weight:''' 25g
-* Power supply:5V
-* Weight: 25g
-'''Important note:'''
-* The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.
-*  In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.
-*  When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.
 ==Packing List==
@@ Line 37: / Line 48: @@
 [[File:C792-IMG-9541-Packing list.jpg|500px]]
-==User Manual==
+==User Manual - C792 / C790 / C779 Software Demo==
 <!-- 可以参考bli的说明
 https://wiki.blicube.com/blikvm/zh/hdmi-csi-i2s/#demo
 -->
+{{C792-Software}}
+----
+Here are a few tutorials:
+* Similar Products Guide: [[X1300 Software]]
+* Tutorial from customers: [https://github.com/geekworm-com/RPi5_hdmi_in_card RPi5_hdmi_in_card]
 * '''Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.'''
 * <span style="color:red">'''Pi 5B platforms HDMI to CSI module test demo reference： '''</span> [[CSI Manual on Pi 5]]
-* Refer to: https://wiki.blicube.com/blikvm/zh/C792/
+* Possible software problems: [https://github.com/raspberrypi/firmware/issues/1915 ISP freezes with new firmware] and [https://github.com/raspberrypi/firmware/issues/1904 Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information]
+* Also refer to: https://wiki.blicube.com/blikvm/en/C792/
-<!--Please choose the  -->
-<!--Remove other categories, just keep the appropriate categories -->
 [[Category:Product Manual]]
 [[Category:Raspberry pi]]
-==FAQ==
+<!-- ==FAQ==
-<!-- 这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->
+ 这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->
+<!-- 这是注释
 <div class="toccolours mw-collapsible mw-collapsed">
 <div style="font-weight:bold;line-height:1.0;">
@@ Line 61: / Line 77: @@
 </div>
 </div>
+-->
 <!--Add review function! -->
-<comments />
+<comment-streams id="main" />
 <!--Please choose the  -->