Geekworm Wiki

C790: Difference between revisions

← Older edit
VisualWikitext
Replace <comments/> with <comment-streams />
 
(3 intermediate revisions by 2 users not shown)
Line 19: Line 19:


==Hardware Parameters==
==Hardware Parameters==
* Model: C790
'''Model:''' C790
* Compatible with Raspberry Pi 5/4B/3B+/3B/Zero/Zero W/Zero 2W/CM4/CM3
 
* HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 / Pi 5)
'''Compatible with:''' Raspberry Pi 5/4B/3B+/3B/Zero/Zero W/Zero 2W/CM4/CM3
* HDMI to CSI-2 bridge chip:Toshiba TC358743XBG
 
* 4 CSI-2 channels & clock '''(Pi 4 and Pi Zero only support 2 lan, max 1080P@50fps, and CM4 / Pi 5 can support 4 lan, max 1080P@60fps)'''
'''HDMI input:''' Supports up to 1080P60Hz on Raspberry Pi (1080p60 only available with CM4 / Pi 5)
* The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C790 module.
 
* The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C790 module.
'''HDMI to CSI-2 bridge chip:''' Toshiba TC358743XBG
* Size: 30 x 45 mm
 
* Power supply:3.3V
'''CSI-2 Performance:'''
* Weight: 10g
*4 CSI-2 data lanes
*Pi 4 & Pi Zero series: 2 lanes max, up to 1080p@50fps
*CM4 & Pi 5: 4 lanes supported, up to 1080p@60fps
'''CSI-2 Interfaces:'''
*Front: 15-pin FPC connector, pitch 1.0 mm
*Back: 22-pin FPC connector, pitch 0.5 mm
'''Specifications:'''
*Size: 30 × 45 mm
*Power: 3.3V
*Weight: 10 g


[[File:C790-i2s-connect.jpg|800px|none|How to connect I2S of C790]]
[[File:C790-i2s-connect.jpg|800px|none|How to connect I2S of C790]]
Line 53: Line 62:
* Refer to: https://wiki.blicube.com/blikvm/en/hdmi-csi-i2s/
* Refer to: https://wiki.blicube.com/blikvm/en/hdmi-csi-i2s/
<!--Add review function! -->
<!--Add review function! -->
<comments />
<comment-streams id="main" />


<!--Please choose the  -->
<!--Please choose the  -->
Retrieved from "https://wiki.geekworm.com/C790"