Difference between revisions of "Template:HDMI to CSI"
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
|| Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4 | || Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4 | ||
|- | |- | ||
| − | | [[File:C792-IMG-9541-size.jpg|150px]] ||[[C792]] || HDMI to CSI-2 with HDMI OUT loop || 1080p'''60fps''' || <span class="tb_red">Yes</span> || Toshiba TC358743XBG || 56 x 56 mm || | + | | [[File:C792-IMG-9541-size.jpg|150px]] ||[[C792]] || HDMI to CSI-2 with HDMI OUT loop || 1080p'''60fps''' || <span class="tb_red">Yes</span> <br/>with 1 x I2S cable (15cm length) || Toshiba TC358743XBG || 56 x 56 mm || |
* 15-PIN FPC (pitch 1.0 mm) on the front of C792 | * 15-PIN FPC (pitch 1.0 mm) on the front of C792 | ||
* 22-PIN FPC (pitch 0.5 mm) on the rear of C792 | * 22-PIN FPC (pitch 0.5 mm) on the rear of C792 | ||
| − | + | <!-- | |
* 1 x 5V Power In cable (21cm length) | * 1 x 5V Power In cable (21cm length) | ||
| + | --> | ||
|| Pi 5B / 4B / 3B+ / 3B / Zero / Zero W/ Zero 2W / CM3 / CM4 | || Pi 5B / 4B / 3B+ / 3B / Zero / Zero W/ Zero 2W / CM3 / CM4 | ||
|- | |- | ||
Revision as of 15:29, 9 July 2025
Geekworm HDMI to CSI Module Series:
Convert HDMI signal acquisition into CSI signal and I2S audio signal. The maximum capture resolution depends on the HDMI to CSI converter board as well as the Raspberry Pi hardware.
Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.
- Raspberry Pi versions that support up to 1080P60Hz: CM3, CM4, Pi 5B
- Raspberry Pi versions that support up to 1080P50Hz: zero, zero2, Pi3B, Pi4B, etc.
| Picture | Model | Description | Max Input Resolution | I2S Audio | HDMI Capture Chip | PCB Dimension | CSI-2 Connector | Supported SOC |
|---|---|---|---|---|---|---|---|---|
 |
C779 | HDMI to CSI-2 | 1080p50fps | NO | Toshiba TC358743XBG | 35 x 50 mm | 15-PIN FPC (pitch 1.0 mm) | Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W |
 |
C790 | HDMI to CSI-2 | 1080p60fps | Yes with 1 x I2S cable (15cm length) |
Toshiba TC358743XBG | 30 x 45 mm |
|
Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4 |
 |
C792 | HDMI to CSI-2 with HDMI OUT loop | 1080p60fps | Yes with 1 x I2S cable (15cm length) |
Toshiba TC358743XBG | 56 x 56 mm |
|
Pi 5B / 4B / 3B+ / 3B / Zero / Zero W/ Zero 2W / CM3 / CM4 |
 |
X630 | HDMI to CSI-2 | 1080p50fps | Yes, but I2S wiring or the X1300-A2 accessory board is necessary | Toshiba TC358743XBG | 30 x 42.4 mm | 15-PIN FPC (pitch 1.0 mm) | 4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W |
 |
X1300 | HDMI RX to MIPI CSI-2-TX | 1080p60fps | Yes, but I2S wiring or the X1300-A2 accessory board is necessary | Toshiba TC358743XBG | 30 x 37.5 mm | 22-PIN FPC (pitch 0.5 mm) | Pi 5B / CM4 IO |
 |
X1301 | HDMI RX to MIPI CSI-2-TX HDMI loop output | 1080p60fps | Yes | Toshiba TC358743XBG | 57 x 85.5 mm | 22-PIN FPC (pitch 0.5 mm) | Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO |
 |
X1300-A2 | I2S audio accessory board for X630 / X1300 | 1080p60fps | This is a I2S audio accessory board | - | 57 x 65 mm | - |