X651
Contents
Overview
Introducing the X651, a state-of-the-art Raspberry Pi CM4-based KVM-over-IP remote management PCI Express card that seamlessly integrates into 1U and 2U form factors across PC, Sun, and Mac platforms. This innovative solution provides remote, unblocked, BIOS-level access and control to optimize server management. Accessible from any web browser, the X651 offers secure, stable, and high-speed KVM access anytime, anywhere.
With the IP KVM PCI card, users can exercise KVM control starting from the BIOS level and beyond. Easily reboot, monitor the entire boot process, and interact with your connected system effortlessly. Additionally, the integrated remote ATX power control feature enables convenient machine power management, including switching on/off, resetting, and remote monitoring of power and storage LED activity.
Moreover, the X651 is equipped with Power over Ethernet (PoE) support, allowing data and power transmission over a single Ethernet cable. This feature streamlines cable usage, eliminates the need for separate power supplies and outlets, and enhances overall convenience and efficiency in network setups.
Geekworm KVM family products:
| Model | Compatible With | Form Factor | Max Input Resolution | ATX Control | RTC Chipset | OLED display | PoE | RS232 Console | Ethernet | M.2 NVMe Socket | Control of PCs | USB HUB | I2S audio |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KVM-A3 V1.6 | Raspberry Pi 4 | HAT | 1920x1080 @50Hz | Yes | DS1307 | 0.96" | No | No | 1GbE | No | 1 | No | Yes In-phase I2S wire |
| KVM-A8 V1.8 | Raspberry Pi 4 | PCI | 1920x1080 @50Hz | Yes | PCF8563 | 0.96" (Equipped with a 2P wire to connect the OLED) |
802.3af | No | 1GbE | No | 1 | No | Yes Inverted-phase I2S wire |
| KVM-A4 V2.0 | Raspberry Pi 2W | HAT | 1920x1080 @50Hz | Yes | DS1307 | 0.96" | No | No | No | No | 1 | No | No |
| X680 V1.5 | Raspberry Pi CM4 | Box | 1920x1080 @60Hz | Yes | PCF8563 | 0.96" | No | No | 1GbE | 2280 | 4 | Yes | No |
Updated to V1.5 now |
Raspberry Pi CM4 | Box | 1920x1080 @50Hz | Yes | DS1307 | 0.96" | No | No | 1GbE | 2280 | 4 | Yes | No |
| X651 V1.0 | Raspberry Pi CM4 | PCI | 1920x1080 @60Hz | Yes | DS1307 | 0.96" | 802.3af | No | 1GbE | No | 1 | No | No |
| Raspberry Pi CM4 | PCI | 1920x1080 @50Hz | Yes | DS1307 | No | No | No | 1GbE | No | 1 | No | No | |
| Raspberry Pi CM4 | PCI | 1920x1080 @60Hz | Yes | DS1307 | No | No | No | 1GbE | No | 1 | No | No | |
| X652 V1.0 | Raspberry Pi CM4 | PCI | 1920x1080 @60Hz | Yes | DS1307 | No | 802.3af (POE injector is required due to compatibility issues) |
No | 1GbE | 2280 | 1 | No | No |
Features
- Built on the Raspberry Pi Compute Module 4 platform
- Compatible with all CM4 lite variants, as well as the 16GB and 32GB eMMC models
- Reliable remote network access to servers and computers
- Installs justs like any PCI card into a tower / desktop PC
- Low profile and standard profile bracket Inside-both Mini and standard desktop host workable
- Supports HDMI input resolutions up to 1920x1080 at 60Hz
- Supports HDMI audio capture
- HDMI Full HD capture based on the TC358743 chip
- OTG Keyboard & mouse; Mass Storage Drive emulation
- Hardware Real-Time Clock (RTC) with CR1220 coin battery socket
- Compatible with PC, Mac, Linux, and Sun Systems
- Gigabit Ethernet that supports data transfer speeds of up to 1000 Mbps
- PoE Supported – Power over Ethernet for simplified installation
- Supports booting from Micro-SD, CM4 eMMC
- Supports ATX control for powering the machine on/off and resetting it
- Supports powering via USB-C
- Equipped with a cooling fan to dissipate heat from the Raspberry Pi CPU
Packing List
- X651 IPKVM PCI card with standard-profile bracket x1 - CM4 not included
- PCI low-profile bracket x1
- ATX control rainbow cable x1
- CPU cooling fan x1
- 0.96" OLED display x1
- PH2.0-4P to XH2.54-4P connection wire for 0.96" OLED display x1
- Mini HDMI to HDMI (Type A) cable 0.5M x1
- USB-C to USB-A OTG data cable 0.5M x1
- Screw pack x1
User Manual
- Hardware Installation:
- How to make it work:
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher