Difference between revisions of "X950 software"
Jump to navigation
Jump to search
(Created page with "{{GD Template Impl}} <!--Add review function! --> <comments /> <!--Please choose the --> <!--Remove other categories, just keep the appropriate categories --> Category:...") |
|||
Line 1: | Line 1: | ||
{{GD Template Impl}} | {{GD Template Impl}} | ||
+ | |||
+ | ==Raspbian== | ||
+ | Please refer to here: File:DAC-setting-raspbian.pdf if you want use it on Raspbian. | ||
+ | |||
+ | ==[https://volumio.org/get-started/ Volumio]== | ||
+ | * Write SD card image and boot Pi. | ||
+ | * connect from web browser to volumio.local | ||
+ | * Select the top right hand side (burger) menu and select PLAYBACK OPTIONS. | ||
+ | * Turn on "I2S DAC" and select "ST400" under“DAC Model.” Then reboot and you are done. | ||
+ | |||
+ | ==[http://www.moodeaudio.org/ Moode Audio Player]== | ||
+ | * Connect from web browser to moode.local | ||
+ | * Select configure from the pull down menu, then system. | ||
+ | * Within the Audio section select the device you have (such as Pi-DAC+) and press SET | ||
+ | * Within the same selection make sure you set the volume to around 20% (not 100%) and press SET | ||
+ | * Select reboot | ||
+ | |||
+ | Once reconnected…. | ||
+ | * Select configure from the pull down menu and then MPD | ||
+ | * Within Setting, select volume control - hardware and then APPLY | ||
+ | * Select reboot | ||
+ | |||
+ | ==[http://www.runeaudio.com/ RuneAudio]== | ||
+ | * Write SD card image, boot Pi. | ||
+ | * login into the Pi via ssh as root (password rune) and edit /boot/config.txt to select the IQaudio Pi-DAC+ devicetree overlay. Save and reboot | ||
+ | * Connect from web browser to runeaudio.local | ||
+ | * Select the pull down settings menu and select MPD, here change audio interface to IQaudIO DAC, beneath this select Volume control: enabled-hardware | ||
+ | * Press SAVE AND APPLY | ||
+ | |||
+ | ==[http://openelec.tv/get-openelec OpenElec]== | ||
+ | * Download Stable Openelec 6.0.3 image from http://releases.openelec.tv/OpenELECRPi2.arm-6.0.3.img.gz | ||
+ | * Write image to SD card | ||
+ | * Boot Openelec | ||
+ | * SSH into the Raspberry PI and edit config.txt to include the device tree | ||
+ | * mount -o remount,rw /flash | ||
+ | * nano /flash/config.txt | ||
+ | <pre> | ||
+ | # audio interfaces | ||
+ | dtoverlay=iqaudio-dacplus | ||
+ | # optional hardware interfaces | ||
+ | dtparam=i2s=on | ||
+ | </pre> | ||
+ | * Once above changes have been made, then ctrl+x to save. | ||
+ | * mount -o remount,ro /flash | ||
+ | * reboot | ||
Revision as of 18:57, 15 June 2021
Raspbian
Please refer to here: File:DAC-setting-raspbian.pdf if you want use it on Raspbian.
Volumio
- Write SD card image and boot Pi.
- connect from web browser to volumio.local
- Select the top right hand side (burger) menu and select PLAYBACK OPTIONS.
- Turn on "I2S DAC" and select "ST400" under“DAC Model.” Then reboot and you are done.
Moode Audio Player
- Connect from web browser to moode.local
- Select configure from the pull down menu, then system.
- Within the Audio section select the device you have (such as Pi-DAC+) and press SET
- Within the same selection make sure you set the volume to around 20% (not 100%) and press SET
- Select reboot
Once reconnected….
- Select configure from the pull down menu and then MPD
- Within Setting, select volume control - hardware and then APPLY
- Select reboot
RuneAudio
- Write SD card image, boot Pi.
- login into the Pi via ssh as root (password rune) and edit /boot/config.txt to select the IQaudio Pi-DAC+ devicetree overlay. Save and reboot
- Connect from web browser to runeaudio.local
- Select the pull down settings menu and select MPD, here change audio interface to IQaudIO DAC, beneath this select Volume control: enabled-hardware
- Press SAVE AND APPLY
OpenElec
* Download Stable Openelec 6.0.3 image from http://releases.openelec.tv/OpenELECRPi2.arm-6.0.3.img.gz * Write image to SD card * Boot Openelec * SSH into the Raspberry PI and edit config.txt to include the device tree * mount -o remount,rw /flash * nano /flash/config.txt
# audio interfaces dtoverlay=iqaudio-dacplus # optional hardware interfaces dtparam=i2s=on
* Once above changes have been made, then ctrl+x to save. * mount -o remount,ro /flash * reboot
Enable comment auto-refresher
Anonymous user #6
Permalink |
Anonymous user #6
Walker
Anonymous user #4
Permalink |
Walker
Anonymous user #3
Permalink |
Lisa
Anonymous user #2
Permalink |
Anonymous user #5
Lisa
Permalink |
Anonymous user #1
Permalink |