X832-C1
Contents
Overview
Note: 1. The power control switch in X832-C1 metal case is latching switch. 2. The Raspberry Pi 4 Model B, X832 V1.2 3.5" SATA board, 3.5" SATA HDD, X735 power management board and DC 12V Power Adapter are all not included in the packing list. 3. When use with X735 board, the power supply MUST only be connected to X832 DC 12V IN port NOT X735. 4. When use X832 V1.2 with X735 board, please REMOVE the jumper caps on the X832 V1.2.
Features
- Support Max. 26.1mm thickness 3.5" SATA HDD installation, support 17.8mm & 26.1mm 3.5" SATA HDD
- Power switch with beautiful LED indicator to control the power of X832 V1.2 and the Raspberry Pi 4 Model B
- Reserved Side Slot(Interface) for GPIO/FFC Cable
- Reserved Slot for X735 DC power Port, Microusb Port and Type-C Power Port
- When use with X735 board, the power supply MUST only be connected to X832 DC 12V IN port NOT X735.
- When use X832 V1.2 with X735 board, please REMOVE the jumper caps on the X832 V1.2.
- VESA mount: 100mm
- Case Size(Installation): 168*104*75(mm) / 6.61 x 4.09 x 2.95 (inch);
- High quality metal material with surface galvanized process;
- Equipped with 2pin 4010 cooling fan in the case; But if use with X735 board, there is no need to use the cooling fan inside X832-C1 case.
Packing List
- 1x X832-C1 metal case for X832 V1.2
- 1x latching power control switch
- 1x 2pin 4010 cooling fan
- 1x Installation screws pack
User Manual
Installation Video for X832 V1.2 12V 3.5" SATA Shield+[[X735[[ V2.5+X832-C1 Metal Case: https://youtu.be/yVxmb6SugJY
Enable comment auto-refresher