Difference between revisions of "X630"
Jump to navigation
Jump to search
Line 18: | Line 18: | ||
* Able to start RASPISTILL or RASPIVID multiple times and no reboot required | * Able to start RASPISTILL or RASPIVID multiple times and no reboot required | ||
* Easily fixed on Raspberry Pi and DIY your pefect case | * Easily fixed on Raspberry Pi and DIY your pefect case | ||
+ | |||
+ | ==User Manual== | ||
+ | * [[X630-Hardware]] | ||
+ | * [[X630-Software]] | ||
==Packing List== | ==Packing List== | ||
Line 27: | Line 31: | ||
* 4 x M2.5*5 Screw | * 4 x M2.5*5 Screw | ||
* 1 x M2.5 Nut | * 1 x M2.5 Nut | ||
− | |||
− | |||
− | |||
− | |||
==FAQ== | ==FAQ== |
Revision as of 15:43, 23 September 2021
Contents
Overview
The X630 hdmi to csi module is a bridge module that converts HDMI stream to MIPI CSI-2, which enables your Raspberry Pi to accept HDMI video and audio streams and process them as incoming data source.
Features
- Specifically designed mounting hole for the Raspberry Pi
- HDMI to CSI-2 bridge chip: Toshiba TC358743XBG
- Video Formats Support (Up to 1080P)
- Audio is supported and can be transmitted over CSI-2 stream or over I2S
- CSI-2 Transmit Interface MIPI CSI-2 compliant (Version 1.01 Revision 0.04 -2 April 2009)
- CSI-2 connector: 15 pin FPC with 1.0 mm pitch
- Able to start RASPISTILL or RASPIVID multiple times and no reboot required
- Easily fixed on Raspberry Pi and DIY your pefect case
User Manual
Packing List
- 1x X630 HDMI to CSI-2 Module
- 1x X630-A1 Board
- 1 x FPC cable(5cm length)
- 1 x FPC cable-for backup(15cm length)
- 2 x F/F M2.5*17mm Spacer
- 4 x M2.5*5 Screw
- 1 x M2.5 Nut
Enable comment auto-refresher
Anonymous user #5
Permalink |
Anonymous user #4
Permalink |
Anonymous user #3
Permalink |
Walker
Anonymous user #2
Permalink |
Anonymous user #2
Permalink |
Walker
Anonymous user #1
Permalink |
Lisa