Difference between revisions of "X305"

From Geekworm Wiki
Jump to navigation Jump to search
 
(28 intermediate revisions by 4 users not shown)
Line 7: Line 7:
 
[[File:IMG-4337.jpg|thumb|right|X305 + Pi Zero 2 W / Zero W + C296]]
 
[[File:IMG-4337.jpg|thumb|right|X305 + Pi Zero 2 W / Zero W + C296]]
  
 +
==Overview==
 +
X305 is a soft router expansion board based on Raspberry Pi ZERO W or Rasberry Pi Zero 2W('''BUT No accoring firmware support''' on [https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi OpenWRT OS]), it is compatible with [https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi Openwrt] system, with 2 USB2.0, 2 100M Ethernet ports, powered by type-c, which is convenient for you to DIY your own router;We recommend that you use [https://github.com/immortalwrt/immortalwrt ImmortalWrt], and ImmortalWrt is the fork of [https://openwrt.org/ OpenWrt]
  
 +
[[File:X305-IMG-4291-digram-1.jpg|none|frame|X305 soft router shield digram]]
  
−
==Overview==
+
'''Note:'''
−
X305 is a soft router expansion board based on Raspberry Pi ZERO W or Rasberry Pi Zero 2W, it is fully compatible with [https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi Openwrt] system, with 2 USB2.0, 2 100M Ethernet ports, powered by type-c, which is convenient for you to DIY your own router;
+
* Compatible with PI ZERO W /PI ZERO 2W, Power the PI ZERO 2W/ZERO W via pogo pins;
−
 
+
* DON'T compatiable with Pi Zero because the position of solder joint to power Pi Zero is different with pi zero 2 w / zero w. BUT Pi zero is still supported if you power pi zero and X305 seperately.
−
Compatible with PI ZERO W /PI ZERO 2W,
+
* The micro usb OTG port of Raspberry pi ZERO 2 W /ZERO W can not be used because it is occupied as USB OTG.
  
 
==Features==
 
==Features==
 
* Carrier Board designed for Raspberry Pi Zero W/2W
 
* Carrier Board designed for Raspberry Pi Zero W/2W
 
* Equipped with dual 10/100M Ethernet ports
 
* Equipped with dual 10/100M Ethernet ports
−
* Equipped with dual USB2.0 ports
+
* Onboard two USB 2.0 Ports - No more external USB hub
 +
* Gain 3 USB2.0, downstream ports which offer HighSpeed (480Mbps), FullSpeed (12Mbps), and LowSpeed (1.5Mbps)
 
* Ideal for soft router applications
 
* Ideal for soft router applications
−
* Fully compatiblie with OpenWrt without the need for drivers
+
* Compatiblie with OpenWrt without the need for drivers
−
* Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
+
* Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required
−
* Power using USB Type-C
+
* Power via USB Type-C on X305
  
 
==How to Power==
 
==How to Power==
 
* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X305)
 
* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X305)
 +
 +
[[File:X305-IMG-4330-700px.jpg|frame|none|Power the kit vis Type-C of X305 NOT Micro USB of Pi Zero 2W]]
 +
 +
==How to Cool==
 +
Aluminum Heatsink for raspberry pi zero 2 w, please refer to [[C296]]
 +
 +
It is also compatible with '''raspberry pi zero w''' by using thermal pads of different thicknesses (1-1.3mm is ok, better to use '''1.3mm''').
 +
[[File:X305-IMG-4338-750ipex.jpg|frame|none|Support Geekworm C296 Heatsink for Pi Zero 2W]]
  
 
==Packing List==
 
==Packing List==
−
* 1 x X305 Soft Runter Shield
+
* 1 x X305 Soft Router Shield
−
* 4 x M2.5 x 5 Screws
+
* 4 x M2.5 x 5mm Screws
 
[[File:X305-IMG 4288-acce-size-1.jpg|border|700px]]
 
[[File:X305-IMG 4288-acce-size-1.jpg|border|700px]]
  
 
==User Manual==
 
==User Manual==
−
Software: [https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi/ Software]
+
* About openwrt refer to: [https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi/ Openwrt OS]
 +
* X305 Dimensions source file (DXF): [[File:X305-V1.dxf|X305 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
 +
* Download Link of '''OpenWRT OS''' as follows or click [https://downloads.openwrt.org/releases/21.02.2/targets/bcm27xx/bcm2708/openwrt-21.02.2-bcm27xx-bcm2708-rpi-ext4-factory.img.gz LINK] to download
 +
https://downloads.openwrt.org/releases/21.02.2/targets/bcm27xx/bcm2708/
 +
 
 +
[[File:Openwrt-os.png]]
 +
 
 
<!--Add review function! -->
 
<!--Add review function! -->
 
<comments />
 
<comments />
Line 39: Line 57:
 
[[Category:Product Manual]]
 
[[Category:Product Manual]]
 
[[Category:Raspberry pi]]
 
[[Category:Raspberry pi]]
−
[[Category:Knowledge]]
 

Latest revision as of 17:04, 2 August 2023

X305 V1.2 soft router shield - Left View
X305 V1.2 soft router shield - Front View
X305 V1.2 soft router shield - Rear View
X305 V1.2 soft router shield - Right View
X305 + Pi Zero 2 W / Zero W
X305 + Pi Zero 2 W / Zero W + C296

Overview

X305 is a soft router expansion board based on Raspberry Pi ZERO W or Rasberry Pi Zero 2W(BUT No accoring firmware support on OpenWRT OS), it is compatible with Openwrt system, with 2 USB2.0, 2 100M Ethernet ports, powered by type-c, which is convenient for you to DIY your own router;We recommend that you use ImmortalWrt, and ImmortalWrt is the fork of OpenWrt

X305 soft router shield digram

Note:

  • Compatible with PI ZERO W /PI ZERO 2W, Power the PI ZERO 2W/ZERO W via pogo pins;
  • DON'T compatiable with Pi Zero because the position of solder joint to power Pi Zero is different with pi zero 2 w / zero w. BUT Pi zero is still supported if you power pi zero and X305 seperately.
  • The micro usb OTG port of Raspberry pi ZERO 2 W /ZERO W can not be used because it is occupied as USB OTG.

Features

  • Carrier Board designed for Raspberry Pi Zero W/2W
  • Equipped with dual 10/100M Ethernet ports
  • Onboard two USB 2.0 Ports - No more external USB hub
  • Gain 3 USB2.0, downstream ports which offer HighSpeed (480Mbps), FullSpeed (12Mbps), and LowSpeed (1.5Mbps)
  • Ideal for soft router applications
  • Compatiblie with OpenWrt without the need for drivers
  • Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required
  • Power via USB Type-C on X305

How to Power

  • Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X305)
Power the kit vis Type-C of X305 NOT Micro USB of Pi Zero 2W

How to Cool

Aluminum Heatsink for raspberry pi zero 2 w, please refer to C296

It is also compatible with raspberry pi zero w by using thermal pads of different thicknesses (1-1.3mm is ok, better to use 1.3mm).

Support Geekworm C296 Heatsink for Pi Zero 2W

Packing List

  • 1 x X305 Soft Router Shield
  • 4 x M2.5 x 5mm Screws

X305-IMG 4288-acce-size-1.jpg

User Manual

https://downloads.openwrt.org/releases/21.02.2/targets/bcm27xx/bcm2708/

Openwrt-os.png

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=X305&oldid=17172"