Difference between revisions of "X303"

Revision as of 12:24, 17 May 2022

X303 Ethernet expansion & usb hub board

X303 + Raspberry pi zero 2 w

X303 + Raspberry pi zero 2 w + C296

X303 pcb size

X303 is a Gigabit Ethernet expansion board with USB HUB specially designed for Raspberry Pi Zero 2 W / Pi Zero / Zero W / Zero WH.

It equipped with a Gigabit Ethernet, 3 standard USB-A 2.0 ports, and a USB Type C to power.

The USB-A port can be used to connect external devices such as mouse, keyboard etc.

Onboard USB2.0 to 10/100/1000M Gigabit Ethernet
Upgrade to fast, wired Ethernet speeds via USB
Improve speed and reliability over faster networks
Practical speeds of 200300Mbps on a Gigabit network. Supports auto MDIX
Powered by the Realtek RTL8153 chipset that provides better performance, and stability, than most WiFi networks
Onboard three USB 2.0 Ports - No more external USB hub
Gain 3 USB2.0, downstream ports which offer HighSpeed (480Mbps), FullSpeed (12Mbps), and LowSpeed (1.5Mbps)
Powers the Raspberry Pi via Pogo Pins - no wiring & soldering required

Power via USB C 5V In port of X303

Power supply requirement: 5Vdc +/-5% , ≥3A

Recommend to use with Geekworm C296 aluminum heatsink for Raspberry Pi Zero 2 W.

C296 also compatible with raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero w is not included.

@@ Line 6: / Line 6: @@
 [[File:X303-PCB.png|thumb|right|X303 pcb size]]
 ==Overview==
-X303 is a Gigabit Ethernet expansion board with USB HUB specially designed for Raspberry Pi Zero 2 W / Zero W.
+X303 is a Gigabit Ethernet expansion board with USB HUB specially designed for Raspberry Pi Zero 2 W / Pi Zero / Zero W / Zero WH.
 It equipped with a Gigabit Ethernet, 3 standard USB-A 2.0 ports, and a USB Type C to power.